You check status from http://server_ip:admin_port/cgi-bin/status. You have
acces there only when bearbox is up and running.
P.S:
-----
You wrote :
~/download/gateway-1.4.3/gw/bearerbox -v 1
~/download/gateway-1.4.3/gw/smskannel.conf
To start smsbox you call : ~/download/gateway-1.4.3/gw/smsbox
smskannel.conf
----- Original Message -----
From: "alexis_msn" <alexiscard...@gmail.com>
To: <users@kannel.org>
Sent: Monday, July 25, 2011 1:54 PM
Subject: Re: Need help starting kannel, please help
Hi there Tania
Thanks for the reply but I do have the smsc groupt in my smskannel.conf
file. I didn't put it on the post. Here it is:
group = smsc
smsc = fake
smsc-id = FAKE
port = 10000
connect-allow-ip = 127.0.0.1
So I don't think that's the problem. I need some help understanding how
this
works. By the way, do you know the command to check the kannel status?
Any help will be welcome.
Regards
Alexis C.
Tania Petsouka wrote:
Try to add to your config an smsc group (even the fake one)
I guess that it can't find any smsc and it stops there.
Tania
----- Original Message -----
From: "alexis_msn" <alexiscard...@gmail.com>
To: <users@kannel.org>
Sent: Monday, July 25, 2011 1:13 PM
Subject: Need help starting kannel, please help
Hi all,
I've checked in this forum for answer for my problem but I couldn't find
one
that cleared my doubts.
I've just installed kannel (made the gzip tarball download in kannel
website) in ubuntu 10.04 LTS. Then I wanted to run the bearerbox and the
smsbox. I didn't change anything in my smskannel.conf file where the
core
group is:
group = core
admin-port = 13000
smsbox-port = 13001
admin-password = bar
#status-password = foo
#admin-deny-ip = ""
#admin-allow-ip = ""
#log-file = "/tmp/kannel.log"
#log-level = 0
box-deny-ip = "*.*.*.*"
box-allow-ip = "127.0.0.1"
#unified-prefix = "+358,00358,0;+,00"
#access-log = "/tmp/access.log"
#store-file = "kannel.store"
#ssl-server-cert-file = "cert.pem"
#ssl-server-key-file = "key.pem"
#ssl-certkey-file = "mycertandprivkeyfile.pem"
And the smsbox group is:
group = smsbox
bearerbox-host = 127.0.0.1
sendsms-port = 13013
global-sender = 13013
#sendsms-chars = "0123456789 +-"
#log-file = "/tmp/smsbox.log"
#log-level = 0
#access-log = "/tmp/access.log"
So as you can see I did not change a thing yet. Still when I tried this
command:
~/download/gateway-1.4.3/gw/bearerbox -v 1
~/download/gateway-1.4.3/gw/smskannel.conf
I get this result:
2011-07-24 22:35:51 [15596] [0] INFO: Debug_lvl = 1, log_file = <none>,
log_lvl = 0
2011-07-24 22:35:51 [15596] [0] WARNING: DLR: using default 'internal'
for
storage type.
2011-07-24 22:35:51 [15596] [0] INFO: DLR using storage type: internal
2011-07-24 22:35:51 [15596] [0] INFO: SSL not supported, no SSL
initialization done.
2011-07-24 22:35:51 [15596] [0] INFO: HTTP: Opening server at port
13000.
2011-07-24 22:35:51 [15596] [0] INFO: BOXC: 'smsbox-max-pending' not
set,
using default (100).
2011-07-24 22:35:51 [15596] [0] INFO: Set SMS resend frequency to 60
seconds.
2011-07-24 22:35:51 [15596] [0] INFO: SMS resend retry set to unlimited.
2011-07-24 22:35:51 [15596] [0] INFO: DLR rerouting for smsc id <FAKE>
disabled.
2011-07-24 22:35:51 [15596] [0] INFO:
----------------------------------------
2011-07-24 22:35:51 [15596] [0] INFO: Kannel bearerbox II version 1.4.3
starting
2011-07-24 22:35:51 [15596] [0] INFO: MAIN: Start-up done, entering
mainloop
It simply stops at this mainloop. Is this normal? Please bear in mind
that
I'm new with this thing and I simply want to learn to use kannel as a
sms
plataform.
Thank you for your attention and my apologies if there is a post
regarding
this same issue that I missed when looking.
Alexis C.
--
View this message in context:
http://old.nabble.com/Need-help-starting-kannel%2C-please-help-tp32128784p32128784.html
Sent from the Kannel - User mailing list archive at Nabble.com.
--
View this message in context:
http://old.nabble.com/Need-help-starting-kannel%2C-please-help-tp32128784p32130688.html
Sent from the Kannel - User mailing list archive at Nabble.com.
