To send messages via smpp, you don't need opensmppbox. Just insert an entry in the send_sms table of sqlbox. If you fill in the proper values, the message gets sent.
== Rene From: Michael van der Poel [mailto:movdp...@gmail.com] Sent: Wednesday, 29 June, 2011 06:59 To: Rene Kluwen; users@kannel.org Subject: Re: Problem configuring opensmppbox Well, I have cleaned up the opensmpp config file (I hope): group = core dlr-storage = internal group = opensmppbox opensmppbox-id = smppbox opensmppbox-port = 10000 bearerbox-host = localhost bearerbox-port = 13005 log-level = 0 log-file = /var/log/kannel/opensmppbox.log our-system-id = opensmppid route-to-smsc = smpp-SMSC smpp-logins = "/usr/local/kannel.1.5/smpplogins.txt" This should now correspond with the below SMSC values in the kannel config file: group = smsc smsc = smpp smsc-id = smpp- SMSC host = msg1. SMSC.com port = 8000 receive-port = 8000 transceiver-mode = false throughput = 10 smsc-username = USERNAME smsc-password = PASSWORD system-type = USERNAME dest-addr-ton=1 log-file = "/var/log/kannel/smpp- SMSC.log" log-level = 0 msg-id-type=0x01 enquire-link-interval = 30 And with the values in smpplogins.txt: USERNAME PASSWORD USERNAME *.*.*.* But opensmpp log shows that there is no record of 2 messages being sent: 2011-06-29 03:19:27 [11361] [0] INFO: Added logfile `/var/log/kannel/opensmppbox.log' with level `0'. 2011-06-29 03:19:27 [11361] [0] INFO: Waiting for SMPP connections on port 10000. whereas the bearerbox log shows those 2 messages being sent and acknowledged: 2011-06-29 03:27:25 [11312] [9] DEBUG: boxc_receiver: sms received 2011-06-29 03:27:25 [11312] [9] DEBUG: send_msg: sending msg to boxc: <sqlbox> 2011-06-29 03:27:25 [11312] [10] DEBUG: send_msg: sending msg to boxc: <sqlbox> 2011-06-29 03:27:25 [11312] [10] DEBUG: boxc_sender: sent message to <127.0.0.1> 2011-06-29 03:27:25 [11312] [9] DEBUG: boxc_receiver: got ack 2011-06-29 03:33:45 [11312] [9] DEBUG: boxc_receiver: sms received 2011-06-29 03:33:45 [11312] [9] DEBUG: send_msg: sending msg to boxc: <sqlbox> 2011-06-29 03:33:45 [11312] [10] DEBUG: send_msg: sending msg to boxc: <sqlbox> 2011-06-29 03:33:45 [11312] [10] DEBUG: boxc_sender: sent message to <127.0.0.1> 2011-06-29 03:33:45 [11312] [9] DEBUG: boxc_receiver: got ack I am running out of ideas. Any suggestions are most welcome! Michael
