Actually bearerbox doesn't need an smsbox group or a connected one to start.
Let's not forget that for historical reasons it was first created for
wapbox.
The reason you are loosing your sms when connecting to an smsbox is probably
because you haven't configured correctly smsbox-route group. Read in UG
about it. Otherwise you use smsbox if you need to terminate MOs, or DLRs, or
push MT's via its web interface.
BR,
Nikos
----- Original Message -----
From: "Rene Kluwen" <rene.klu...@chimit.nl>
To: "Denilson Silva" <deny...@hotmail.com>
Cc: <users@kannel.org>
Sent: Friday, May 27, 2011 12:06 AM
Subject: Re: Route sms to different ESME's
If you don't need smsbox, you might just as well not start it.
However, as far as I remember you do need to group = smsbox in your
kannel.conf or else bearerbox won't start.
About your other question: I don't know, maybe somebody else does.
== Rene
Ok. Well, in my tests bearerbox can store the messages and send it later
when
the esme is connected again. I hope i'm not bothering you too much, but i
have one more question. It's something i noticed, maybe is a concept about
opensmppbox that i'm not aware. It's like this: i have my smpp server with
bearerbox initiated and opensmppbox initiated, if the esme is down,
bearerbox stores the messages sent to the esme, and send it later when the
esme is up. But if i start smsbox in my smpp server with bearerbox and
opensmppbox when the esme is down, than bearerbox doesn't store the
messages, it just send request failed to the subscriber. So, if i only use
it as a smppbox server, do i need smsbox or not? And why if smsbox is
started it won't store the messages? Well, i really apreciated all your
help
you've given me.
Best regards
Denilson
Nikos Balkanas wrote:
You can always check kannel's web site under authors. There you can find
2
mails for Stipe. I am sure he won't mind you getting in touch with him.
BR,
Nikos
----- Original Message -----
From: "Denilson Silva" <deny...@hotmail.com>
To: <users@kannel.org>
Sent: Thursday, May 26, 2011 6:30 PM
Subject: Re: Route sms to different ESME's
Ok. I would like to know how can i contact Stipe? I tried once some
time
ago
to know about his commercial version with no success, because i could
be
interested in the commercial version. Well, Thanks a lot.
Denilson
Nikos Balkanas wrote:
Hi,
Opensmppbox doesn't have permanent storage, so it can't store SMS.
There
is
a commercial version by Stipe that does that. Having said that, your
SMS
will be stored in bb's storage, until the ESME comes back on line.
This
will
work most of the time, but I am not sure if it is 100% reliable,
though,
openssmppbox have had some issues with its ACKs in the past.
BR,
Nikos
----- Original Message -----
From: "Denilson Silva" <deny...@hotmail.com>
To: <users@kannel.org>
Sent: Thursday, May 26, 2011 4:36 PM
Subject: Re: Route sms to different ESME's
Hi, thanks for the response. It works with smsbox-route. There is
another
question i have, i don't know if i should make another thread. Well,
here
it
is: does opensmppbox support storing messages destined to an esme if
this
esme is offline, and send it later to this esme when it's connected?
How
can
it be done? Or do i have to create a solution for this kind of
situation?
Thanks.
Denilson
Nikos Balkanas wrote:
Hi,
Yes you should. You are talking about MOs. There is no reason you
shouldn't
be able to do it, but I have never tried it. Read about group
smsbox-route
in UG.
BR,
Nikos
----- Original Message -----
From: "Denilson Silva" <deny...@hotmail.com>
To: <users@kannel.org>
Sent: Tuesday, May 17, 2011 9:07 PM
Subject: Route sms to different ESME's
Greetings to all. I would be very thankfull if i can have an
information.
I
woukd like to know if there is a way of routing SMS's from
subscribers
to
an
ESME client with opensmppbox or kannel. For example, i am connected
with
two
different ESME's, and if a subscriber send an SMS to a number
configured
in
my SMSC, then i route it to ESME 1, if it is to other number i
route
it
to
ESME 2. What i can do now is connect an ESME to my opensmppbox
which
is
connected to bearerbox->SMSC.
Hope i explained well.
Thank you in advance.
Denilson Silva
--
View this message in context:
http://old.nabble.com/Route-sms-to-different-ESME%27s-tp31640431p31640431.html
Sent from the Kannel - User mailing list archive at Nabble.com.
--
View this message in context:
http://old.nabble.com/Route-sms-to-different-ESME%27s-tp31640431p31708102.html
Sent from the Kannel - User mailing list archive at Nabble.com.
--
View this message in context:
http://old.nabble.com/Route-sms-to-different-ESME%27s-tp31640431p31709160.html
Sent from the Kannel - User mailing list archive at Nabble.com.
--
View this message in context:
http://old.nabble.com/Route-sms-to-different-ESME%27s-tp31640431p31711287.html
Sent from the Kannel - User mailing list archive at Nabble.com.
