I have defined the following group = smsbox-route smsbox-id = mysmsc smsc-id = huawei_e220
As of now I am not getting that warning, so I think problem is solved. Am I right ? 2011/4/16 Nikos Balkanas <nbalka...@gmail.com>: > Hi, > > You need to configure group smsbox-route. Read UG about it. > > BR, > Nikos > ----- Original Message ----- From: "Harbhag Singh Sohal" > <harbhag.so...@gmail.com> > To: <users@kannel.org> > Sent: Friday, April 15, 2011 1:50 PM > Subject: WARNING: smsbox_list empty! > > >> I keep getting this message on terminal in Ubuntu >> WARNING: smsbox_list empty! >> Below are my config files >> >> #Sample configuration file for Kannel bearerbox on Debian. >> # See the documentation for explanations of fields. >> # >> >> # HTTP administration is disabled by default. Make sure you set the >> # password if you enable it. >> >> group = core >> admin-port = 13015 >> admin-password = hard2guess >> #admin-deny-ip = "*.*.*.*" >> admin-allow-ip = "127.0.0.1" >> dlr-storage = internal >> smsbox-port = 13016 >> #wdp-interface-name = "*" >> log-file = "/var/log/kannel/bearerbox.log" >> access-log = "/var/log/kannel/access.log" >> #box-deny-ip = "*.*.*.*" >> box-allow-ip = "127.0.0.1" >> log-level = 0 >> >> #group = wapbox >> #bearerbox-host = localhost >> #log-file = "/var/log/kannel/wapbox.log" >> group = smsc >> smsc-id = huawei_e220 >> smsc = at >> modemtype = huawei >> device= /dev/ttyUSB0 >> my-number = +91 >> connect-allow-ip = 127.0.0.1 >> sim-buffering = true >> log-level = 0 >> >> # DLR with MySQL support configuration >> group = mysql-connection >> id = mydlr >> host = localhost >> username = >> password = >> database = a >> >> group = dlr-db >> id = mydlr >> table = dlr >> field-smsc = smsc >> field-timestamp = ts >> field-source=source >> field-destination = destination >> field-service = service >> field-url = url >> field-mask = mask >> field-status = status >> field-boxc-id = boxc >> >> group = modems >> id = nokia >> name = "Huawei" >> detect-string = "huawei" >> init-string = "ATZ" >> init-string = "AT+CMEE=1" >> init-string = "AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" >> init-string = "AT+CNMI=0,1" >> message-storage = SM >> message-start = 0 >> #speed = 460800 >> #message-start = 0 >> >> group = smsbox >> smsbox-id = mysmsc >> bearerbox-host = 2 >> #bearerbox-port = 13018 >> sendsms-port = 13018 >> global-sender = +91 >> access-log = "/var/log/kannel/smsbox-access.log" >> log-file = "/var/log/kannel/smsbox.log" >> log-level = 0 >> mo-recode = true >> >> group = smsbox-route >> smsbox-id = mysmsc >> >> group = sendsms-user >> username = >> password = hard2guess >> concatenation= true >> max-messages = 10000 >> >> group = sms-service >> keyword-regex = .* >> catch-all = yes >> accepted-smsc = huawei_e220 >> max-messages = 3 >> get-url = "http://localhost/~harbhag/test.php?phone=%p&text=%a"; >> >> >> >> group = sqlbox >> id = sqlbox-db >> smsbox-id = mysmsc >> global-sender = "+91" >> bearerbox-host = 202 >> bearerbox-port = 13016 >> smsbox-port = 13017 >> smsbox-port-ssl = false >> sql-log-table = sent_sms >> sql-insert-table = send_sms >> log-file = "/var/log/kannel/kannel-sqlbox.log" >> log-level = 0 >> #ssl-client-certkey-file = "" >> #ssl-server-cert-file = "" >> #ssl-server-key-file = "" >> #ssl-trusted-ca-file = "" >> >> # Database connection examples. Please uncomment as needed >> >> # Example MYSQL Connection >> group = mysql-connection >> id = sqlbox-db >> host = localhost >> username = >> password = >> database = >> >> >> >> This is what I see when I start bearerbox >> >> >> >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: --> AT&F^M >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- AT&F >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: --> ATE0^M >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- ATE0 >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: --> AT+IFC=2,2^M >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: --> AT+CPIN?^M >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- +CPIN: READY >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: --> AT+CMGF=0^M >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: --> AT+CSMS=?^M >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: --> AT+CNMI=0,1^M >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- +CSMS: (0-1) >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: --> AT+CPMS="SM"^M >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:12:34 [7861] [6] INFO: AT2[huawei_e220]: AT SMSC >> successfully opened. >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- +CPMS: >> 0,20,0,20,0,20 >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:12:34 [7861] [6] DEBUG: AT2[huawei_e220]: --> AT+CPMS?^M >> 2011-03-22 08:12:35 [7861] [6] DEBUG: AT2[huawei_e220]: <-- +CPMS: >> "SM",0,20,"SM",0,20,"SM",0,20 >> 2011-03-22 08:12:35 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:13:37 [7861] [6] DEBUG: AT2[huawei_e220]: --> AT+CPMS?^M >> 2011-03-22 08:13:37 [7861] [6] DEBUG: AT2[huawei_e220]: <-- +CPMS: >> "SM",0,20,"SM",0,20,"SM",0,20 >> 2011-03-22 08:13:37 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:14:39 [7861] [6] DEBUG: AT2[huawei_e220]: --> AT+CPMS?^M >> 2011-03-22 08:14:39 [7861] [6] DEBUG: AT2[huawei_e220]: <-- +CPMS: >> "SM",0,20,"SM",0,20,"SM",0,20 >> 2011-03-22 08:14:39 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:15:41 [7861] [6] DEBUG: AT2[huawei_e220]: --> AT+CPMS?^M >> 2011-03-22 08:15:41 [7861] [6] DEBUG: AT2[huawei_e220]: <-- +CPMS: >> "SM",0,20,"SM",0,20,"SM",0,20 >> 2011-03-22 08:15:41 [7861] [6] DEBUG: AT2[huawei_e220]: <-- OK >> >> >> from bearerbox log, this is what I see when a SMS is received >> >> >> >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: --> AT+CPMS?^M >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: <-- +CPMS: >> "SM",1,20,"SM",1,20,"SM",1,20 >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: 1 messages >> waiting in memory >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: --> AT+CMGR=0^M >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: <-- +CMGR: 0,,23 >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: <-- >> 0791194971909979240C9119494661994000001130228060122204D4F29C0E >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: received >> message from SMSC: +919417099997 >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: Numeric sender >> (international) <+91> >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: User data >> length read as (4) >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: Udh decoding >> done len=4 udhi=0 udhlen=0 udh='' >> 2011-03-22 08:07:00 [7225] [6] WARNING: smsbox_list empty! >> 2011-03-22 08:07:00 [7225] [4] WARNING: smsbox_list empty! >> 2011-03-22 08:07:00 [7225] [4] WARNING: smsbox_list empty! >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: --> AT+CMGD=0^M >> 2011-03-22 08:07:00 [7225] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:08:00 [7225] [4] WARNING: smsbox_list empty! >> 2011-03-22 08:08:02 [7225] [6] DEBUG: AT2[huawei_e220]: --> AT+CPMS?^M >> 2011-03-22 08:08:02 [7225] [6] DEBUG: AT2[huawei_e220]: <-- +CPMS: >> "SM",0,20,"SM",0,20,"SM",0,20 >> 2011-03-22 08:08:02 [7225] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:09:00 [7225] [4] WARNING: smsbox_list empty! >> 2011-03-22 08:09:04 [7225] [6] DEBUG: AT2[huawei_e220]: --> AT+CPMS?^M >> 2011-03-22 08:09:05 [7225] [6] DEBUG: AT2[huawei_e220]: <-- +CPMS: >> "SM",1,20,"SM",1,20,"SM",1,20 >> 2011-03-22 08:09:05 [7225] [6] DEBUG: AT2[huawei_e220]: <-- OK >> 2011-03-22 08:09:05 [7225] [6] DEBUG: AT2[huawei_e220]: 1 messages >> waiting in memory >> 2011-03-22 08:09:05 [7225] [6] DEBUG: AT2[huawei_e220]: --> AT+CMGR=0^M >> 2011-03-22 08:09:05 [7225] [6] DEBUG: AT2[huawei_e220]: <-- +CMGR: 0,,26 >> 2011-03-22 08:09:05 [7225] [6] DEBUG: AT2[huawei_e220]: <-- >> 0791194971909979240C9119494661994000001130228070942207C8703C2D0E8B01 >> 2011-03-22 08:09:05 [7225] [6] DEBUG: AT2[huawei_e220]: received >> message from SMSC: +919417099997 >> 2011-03-22 08:09:05 [7225] [6] DEBUG: AT2[huawei_e220]: Numeric sender >> (international) <+91> >> 2011-03-22 08:09:05 [7225] [6] DEBUG: AT2[huawei_e220]: User data >> length read as (7) >> 2011-03-22 08:09:05 [7225] [6] DEBUG: AT2[huawei_e220]: Udh decoding >> done len=7 udhi=0 udhlen=0 udh='' >> 2011-03-22 08:09:05 [7225] [6] WARNING: smsbox_list empty! >> >> >> I am using Ubuntu 10.10 64 bit and Kannel version 1.50. >> Thanks >> >> -- >> Harbhag Singh Sohal >> www.harbhag.wordpress.com >> > > -- Harbhag Singh Sohal www.harbhag.wordpress.com
