start the bearerbox from the command line. You will see more debug if
bearerbox crashes during it starts:
bearerbox /path/to/config
On 31/03/2011 12:56, Deepak Kumar wrote:
Hi Cezary,
Yes we have compiled the kannel with mysql support and it shows the
status "Compiled with SSL, MySql and native calloc.
below is the attached log of my bearerbox when we shutdown the modem.
after this i will enable "dlr-storage = mysql"
2011-03-31 17:03:09 [12390] [0] WARNING: Killing signal or HTTP admin
command received, shutting down...
2011-03-31 17:03:09 [12390] [0] DEBUG: Shutting down Kannel...
2011-03-31 17:03:09 [12390] [0] DEBUG: shutting down smsc
2011-03-31 17:03:09 [12390] [0] DEBUG: AT2[/dev/ttyS0]: Shutting down
SMSCConn, slow
2011-03-31 17:03:09 [12390] [0] DEBUG: shutting down udp
2011-03-31 17:03:09 [12390] [10] DEBUG: Thread 10
(gw/bb_udp.c:udp_receiver) terminates.
2011-03-31 17:03:09 [12390] [8] DEBUG: Thread 8
(gw/bb_udp.c:udp_receiver) terminates.
2011-03-31 17:03:09 [12390] [11] DEBUG: Thread 11
(gw/bb_udp.c:udp_sender) terminates.
2011-03-31 17:03:09 [12390] [9] DEBUG: Thread 9
(gw/bb_udp.c:udp_sender) terminates.
2011-03-31 17:03:10 [12390] [7] DEBUG: Thread 7
(gw/bb_smscconn.c:sms_router) terminates.
2011-03-31 17:03:10 [12390] [4] DEBUG: Thread 4
(gw/bb_boxc.c:sms_to_smsboxes) terminates.
2011-03-31 17:03:10 [12390] [5] DEBUG: Thread 5
(gw/bb_boxc.c:smsboxc_run) terminates.
2011-03-31 17:03:10 [12390] [0] INFO: All flow threads have died,
killing core
2011-03-31 17:03:10 [12390] [0] DEBUG: Waiting for 2
(gwlib/http.c:server_thread) to terminate
2011-03-31 17:03:10 [12390] [3] DEBUG: HTTP: No clients with requests,
quitting.
2011-03-31 17:03:10 [12390] [3] DEBUG: Thread 3
(gw/bb_http.c:httpadmin_run) terminates.
2011-03-31 17:03:10 [12390] [2] DEBUG: Thread 2
(gwlib/http.c:server_thread) terminates.
2011-03-31 17:03:10 [12390] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
terminates.
2011-03-31 17:03:10 [12390] [0] DEBUG: final clean-up for SMSCConn
2011-03-31 17:03:10 [12390] [0] DEBUG: smsbox MO concatenated message
handling cleaned up
2011-03-31 17:03:10 [12390] [0] INFO: Total WDP messages: received 0,
sent 0
2011-03-31 17:03:10 [12390] [0] INFO: Total SMS messages: received 0,
sent 0
2011-03-31 17:03:10 [12390] [0] DEBUG: Immutable octet strings: 219.
still the bearerbox log is same. i think due to changes in core group
bearerbox not start. and if i comment "dlr-storage = mysql" then
bearerebox will work fine see log
2011-03-31 17:07:04 [12460] [0] INFO: Added logfile
`/var/log/kannel/bearerbox.log' with level `0'.
2011-03-31 17:07:04 [12460] [0] INFO: Started access logfile
`/var/log/kannel/access.log'.
2011-03-31 17:07:04 [12460] [0] INFO: HTTP: Opening server at port 13000.
2011-03-31 17:07:04 [12460] [0] DEBUG: Started thread 1
(gwlib/fdset.c:poller)
2011-03-31 17:07:04 [12460] [0] DEBUG: Started thread 2
(gwlib/http.c:server_thread)
2011-03-31 17:07:04 [12460] [0] DEBUG: Started thread 3
(gw/bb_http.c:httpadmin_run)
2011-03-31 17:07:04 [12460] [0] DEBUG: starting smsbox connection module
2011-03-31 17:07:04 [12460] [0] INFO: BOXC: 'smsbox-max-pending' not
set, using default (100).
2011-03-31 17:07:04 [12460] [0] DEBUG: Started thread 4
(gw/bb_boxc.c:sms_to_smsboxes)
2011-03-31 17:07:04 [12460] [0] DEBUG: Started thread 5
(gw/bb_boxc.c:smsboxc_run)
2011-03-31 17:07:04 [12460] [0] INFO: Set SMS resend frequency to 60
seconds.
2011-03-31 17:07:04 [12460] [0] INFO: SMS resend retry set to unlimited.
2011-03-31 17:07:04 [12460] [0] DEBUG: smsbox MO concatenated message
handling enabled
2011-03-31 17:07:04 [12460] [0] INFO: DLR rerouting for smsc id
<(null)> disabled.
2011-03-31 17:07:04 [12460] [0] INFO: Added logfile
`/var/log/kannel/modem.log' with level `0'.
2011-03-31 17:07:04 [12460] [0] INFO: AT2[/dev/ttyS0]: configuration
shows modemtype <siemens_mc52i>
2011-03-31 17:07:04 [12460] [0] DEBUG: AT2[/dev/ttyS0]: Reading modem
definitions from </etc/kannel/kannel.conf>
2011-03-31 17:07:04 [12460] [3] DEBUG: Thread 3
(gw/bb_http.c:httpadmin_run) maps to pid 12460.
2011-03-31 17:07:04 [12460] [5] DEBUG: Thread 5
(gw/bb_boxc.c:smsboxc_run) maps to pid 12460.
2011-03-31 17:07:04 [12460] [0] DEBUG: Loading include file
`/etc/kannel/modems.conf' (on line 55 of file /etc/kannel/kannel.conf).
2011-03-31 17:07:04 [12460] [0] DEBUG: AT2[/dev/ttyS0]: Found <15>
modems in config
2011-03-31 17:07:04 [12460] [2] DEBUG: Thread 2
(gwlib/http.c:server_thread) maps to pid 12460.
2011-03-31 17:07:04 [12460] [4] DEBUG: Thread 4
(gw/bb_boxc.c:sms_to_smsboxes) maps to pid 12460.
2011-03-31 17:07:04 [12460] [0] INFO: AT2[/dev/ttyS0]: read modem
definition for <Siemens MC52i>
2011-03-31 17:07:04 [12460] [0] DEBUG: Started thread 6
(gw/smsc/smsc_at.c:at2_device_thread)
2011-03-31 17:07:04 [12460] [0] DEBUG: Started thread 7
(gw/bb_smscconn.c:sms_router)
2011-03-31 17:07:04 [12460] [0] DEBUG: starting UDP sender/receiver
module
2011-03-31 17:07:04 [12460] [0] INFO: Adding interface *
2011-03-31 17:07:04 [12460] [0] DEBUG: udpc_create: Bound to UDP
<0.0.0.0:9200>
2011-03-31 17:07:04 [12460] [0] DEBUG: Started thread 8
(gw/bb_udp.c:udp_receiver)
2011-03-31 17:07:04 [12460] [0] DEBUG: Started thread 9
(gw/bb_udp.c:udp_sender)
2011-03-31 17:07:04 [12460] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
maps to pid 12460.
2011-03-31 17:07:04 [12460] [7] DEBUG: Thread 7
(gw/bb_smscconn.c:sms_router) maps to pid 12460.
2011-03-31 17:07:04 [12460] [0] DEBUG: udpc_create: Bound to UDP
<0.0.0.0:9201>
2011-03-31 17:07:04 [12460] [0] DEBUG: Started thread 10
(gw/bb_udp.c:udp_receiver)
2011-03-31 17:07:04 [12460] [0] DEBUG: Started thread 11
(gw/bb_udp.c:udp_sender)
2011-03-31 17:07:04 [12460] [0] DEBUG: starting wapbox connection module
2011-03-31 17:07:04 [12460] [0] ERROR: Missing wapbox-port variable,
cannot start WAP
2011-03-31 17:07:04 [12460] [0] DEBUG: starting WDP router
2011-03-31 17:07:04 [12460] [0] DEBUG: Started thread 12
(gw/bearerbox.c:wdp_router)
2011-03-31 17:07:04 [12460] [0] INFO:
----------------------------------------
2011-03-31 17:07:04 [12460] [0] INFO: Kannel bearerbox II version
1.4.3 starting
2011-03-31 17:07:04 [12460] [0] INFO: MAIN: Start-up done, entering
mainloop
2011-03-31 17:07:04 [12460] [0] DEBUG: AT2[/dev/ttyS0]: start called
2011-03-31 17:07:04 [12460] [8] DEBUG: Thread 8
(gw/bb_udp.c:udp_receiver) maps to pid 12460.
2011-03-31 17:07:04 [12460] [10] DEBUG: Thread 10
(gw/bb_udp.c:udp_receiver) maps to pid 12460.
2011-03-31 17:07:04 [12460] [11] DEBUG: Thread 11
(gw/bb_udp.c:udp_sender) maps to pid 12460.
2011-03-31 17:07:04 [12460] [9] DEBUG: Thread 9
(gw/bb_udp.c:udp_sender) maps to pid 12460.
2011-03-31 17:07:04 [12460] [12] DEBUG: Thread 12
(gw/bearerbox.c:wdp_router) maps to pid 12460.
2011-03-31 17:07:04 [12460] [12] DEBUG: udp_die: removing producers
from udp-lists
2011-03-31 17:07:04 [12460] [12] DEBUG: Thread 12
(gw/bearerbox.c:wdp_router) terminates.
2011-03-31 17:07:04 [12460] [6] DEBUG: Thread 6
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 12460.
2011-03-31 17:07:04 [12460] [6] INFO: Logging thread `6' to logfile
`/var/log/kannel/modem.log' with level `0'.
2011-03-31 17:07:04 [12460] [5] INFO: Client connected from <127.0.0.1>
2011-03-31 17:07:04 [12460] [5] DEBUG: Started thread 13
(gw/bb_boxc.c:function)
2011-03-31 17:07:04 [12460] [13] DEBUG: Thread 13
(gw/bb_boxc.c:function) maps to pid 12460.
2011-03-31 17:07:04 [12460] [13] DEBUG: Started thread 14
(gw/bb_boxc.c:boxc_sender)
2011-03-31 17:07:04 [12460] [14] DEBUG: Thread 14
(gw/bb_boxc.c:boxc_sender) maps to pid 12460.
From: Cezary Siwek <cza...@thebestisp.co.uk>
To: users@kannel.org
Date: 03/31/2011 04:01 PM
Subject: Re: Facing issue with DLR using MySql
Sent by: users-boun...@kannel.org
------------------------------------------------------------------------
Hi,
Have you compiled the kannel with mysql support?
what logs says when you start the kannel with "dlr-storage = mysql"?
BR,
Cezary
On 31/03/2011 11:25, Deepak Kumar wrote:
> Dear Team,
>
> My system information is as follow :
>
> Operating system and version. Ubantu V10.10
> Kannel version. 1.4.3
> Libxml version. 2.30.0
> Used client : SMS Client (I am using GSM modem Cinterion MC52i)
> Single or multi processor machine. Multi Processor
> Attach Kannel configuration file
>
> We are facing an issue while configuring the DLR storage. Whenever we
> used "dlr-storage = mysql" the kannel will stop to work and smsc will
> not work. after removing the above statement "dlr-storage = mysql" the
> kannel will work fine and i am able to send and receive sms on my Modem.
>
> I have also check that our kannel is compiled with mysql support.
>
> Find my kannel and dlr, mysql database setting with this mail.
>
>
>
>
> we are struggling from a week with this problem. Please help us.
>
> In case of any query please let us know.
>
>
>
> Regards
>
> Deepak
>
> #
> " Ce courriel et les documents qui lui sont joints peuvent contenir
des informations confidentielles ou ayant un caractère privé. S'ils ne
vous sont pas destinés, nous vous signalons qu'il est strictement
interdit de les divulguer, de les reproduire ou d'en utiliser de
quelque manière que ce soit le contenu. Si ce message vous a été
transmis par erreur, merci d'en informer l'expéditeur et de supprimer
immédiatement de votre système informatique ce courriel ainsi que tous
les documents qui y sont attachés."
> ******
> " This e-mail and any attached documents may contain confidential or
proprietary information. If you are not the intended recipient, you
are notified that any dissemination, copying of this e-mail and any
attachments thereto or use of their contents by any means whatsoever
is strictly prohibited. If you have received this e-mail in error,
please advise the sender immediately and delete this e-mail and all
attached documents from your computer system."
> #
#
" Ce courriel et les documents qui lui sont joints peuvent contenir des informations
confidentielles ou ayant un caractère privé. S'ils ne vous sont pas destinés, nous vous
signalons qu'il est strictement interdit de les divulguer, de les reproduire ou d'en
utiliser de quelque manière que ce soit le contenu. Si ce message vous a été transmis par
erreur, merci d'en informer l'expéditeur et de supprimer immédiatement de votre système
informatique ce courriel ainsi que tous les documents qui y sont attachés."
******
" This e-mail and any attached documents may contain confidential or proprietary
information. If you are not the intended recipient, you are notified that any
dissemination, copying of this e-mail and any attachments thereto or use of their
contents by any means whatsoever is strictly prohibited. If you have received this e-mail
in error, please advise the sender immediately and delete this e-mail and all attached
documents from your computer system."
#
