Halo, Yes, I've read your list before. But from old https://redmine.kannel.org/issues/346, I got confuse, if we set 30.0, actually 90sms/secs? So, I want to know how to got 30sms/secs throttle.
To be honest, we got 30sms/secs for one service. But when we got many error code that we have exceeded the limit, I try to lower it to "15.0" eventhough our backend app still send for 30sms/secs, just like the old system when using non kannel and non SMPP. I think, throghput!=throttle? On 2/4/2011 1:24 PM, Ivan Kurnosov wrote: > I've asked the similar question: > http://www.mail-archive.com/users@kannel.org/msg23353.html > > ans seems like kannel limits only the throughput for parts on one > particular message and doesn't affects on the messages being put to the > queue simultaneously. > > On Fri, Feb 4, 2011 at 4:07 PM, I Gede Wijaya <gwij...@gmail.com > <mailto:gwij...@gmail.com>> wrote: > > Halo list, > > My vendor gave us 3 different throttle set: 15 sms/secs, 20 sms/secs and > 30 sms/secs for each connection. So, I starting 3 Kannel for just > sending, and 2 for just receiving. These are our configuration example > (just two for sending part): > > #For throttle 15 > group = core > admin-port = 8000 > smsbox-port = 8001 > admin-password = "checkkannel" > log-file = "/var/log/kannel/15-bearerbox.log" > access-log = "/var/log/kannel/15-access.log" > log-level = 1 > store-type = spool > store-location = /var/spool/kannel/15 > > #Number 15 > group = smsc > smsc = smpp > smsc-id = smsc15 > allowed-smsc-id = smsc15 > host = x.x.x.x > port = yyyy > receive-port = 0 > smsc-username = username > smsc-password = password > system-type = "VMA" > interface-version = "34" > transceiver-mode = 0 > source-addr-autodetect = 1 > source-addr-ton = 0 > source-addr-npi = 1 > dest-addr-ton = 0 > dest-addr-npi = 1 > throughput = 15.0 > alt-charset = "ASCII" > alt-dcs=0 > wait-ack = 18000 > wait-ack-expire = 0x02 > #connection-timeout = 0 > > include = "/etc/kannel/tlv.conf" > > #For throttle 20 > group = core > admin-port = 10000 > smsbox-port = 10001 > admin-password = "checkkannel" > log-file = "/var/log/kannel/20-bearerbox.log" > access-log = "/var/log/kannel/20-access.log" > log-level = 1 > store-type = spool > store-location = /var/spool/kannel/20 > > > #Number 20 > group = smsc > smsc = smpp > smsc-id = smsc20 > allowed-smsc-id = smsc20 > host = x.x.x.x > port = yyyy > receive-port = 0 > smsc-username = user > smsc-password = password > system-type = "VMA" > interface-version = "34" > transceiver-mode = 0 > source-addr-autodetect = 1 > source-addr-ton = 0 > source-addr-npi = 1 > dest-addr-ton = 0 > dest-addr-npi = 1 > throughput = 20.0 > alt-charset = "ASCII" > alt-dcs=0 > wait-ack = 18000 > wait-ack-expire = 0x02 > #connection-timeout = 0 > > include = "/etc/kannel/tlv.conf" > > But, we still get error code that we exceeded the 'push' limit. > > Thanks in advanced > > > > > -- > With best regards, Ivan Kurnosov
