I got with mblox and it works now.
Thank you so much! Real quick, messages coming from handset to kannel. This will stay the same correct? I can still use the below information in my smskannel.conf ? post-url = http://172.16.94.111/sms_response_parent.html?body=%a <http://172.16.94.111/sms_response_parent.html?body=%25a&opid=%25m&time=%25t &MSISDN=%25p&recipient=%25P&cing=%25F> &opid=%m&time=%t&MSISDN=%p&recipient=%P&cing=%F Paul From: Alejandro Guerrieri [mailto:alejandro.guerri...@gmail.com] Sent: Wednesday, December 15, 2010 2:28 PM To: Paul Harrison Cc: users@kannel.org Subject: Re: Kannel Glad it helped :) I don't believe the warning has nothing to do with the problem. Ask mblox again, you might be missing some other parameter or sending the wrong values. Regards, Alex On Wed, Dec 15, 2010 at 9:14 PM, Paul Harrison <c...@austin.rr.com> wrote: WOW, that was is it.. It works! One other issue. If I pass the service id and program then it fails. http://192.168.1.103:13013/cgi-bin/sendsms?password=foobar <http://192.168.1.103:13013/cgi-bin/sendsms?password=foobar&smsc=psms&to=151 23334444&username=tester&from=54322&text=hello+from+local&meta-data=%3Fsmpp% 3FMBoperator%3D31003%26MBbilling%3D0%26MBserviceId%3D26330%26MBprogram%3Dstd rt> &smsc=psms&to=15123334444&username=tester&from=54322&text=hello+from+local&m eta-data=%3Fsmpp%3FMBoperator%3D31003%26MBbilling%3D0%26MBserviceId%3D26330% 26MBprogram%3Dstdrt 2010-12-15 15:08:50 [865] [3] INFO: sendsms sender:<tester:54322> (192.168.1.116) to:<15123334444> msg:<hello from local> 2010-12-15 15:08:50 [851] [7] WARNING: SMPP: PDU NULL terminated string (message_id) has no NULL. 2010-12-15 15:08:50 [851] [7] ERROR: SMPP[psms]: SMSC returned error code 0x0000042a (Vendor-specific error, please refer to your SMPP provider) in response to submit_sm. 2010-12-15 15:08:50 send-SMS request added - sender:tester:54322 192.168.1.116 target:15123334444 request: 'hello from local' 2010-12-15 15:08:50 FAILED Send SMS [SMSC:psms] [SVC:tester] [ACT:] [BINF:] [FID:] [META:?smpp?MBoperator=31003&MBbilling=0&MBserviceId=26330&MBprogram=stdrt] [from:54322] [to:15123334444] [flags:-1:0:-1:-1:-1] [msg:16:hello from local] [udh:0: Any idea why? Thanks, Paul From: Alejandro Guerrieri [mailto:alejandro.guerri...@gmail.com] Sent: Wednesday, December 15, 2010 1:58 PM To: Paul Harrison Cc: users@kannel.org Subject: Re: Kannel [FID:] [META:?smpp-tlv?MBoperator=3... Ah! You're using "smpp-tlv", change it for "smpp": ?smpp?MBoperator... The smpp-tlv groups seems to be fine, change that and tell me how it goes. Regards, Alex On Wed, Dec 15, 2010 at 8:39 PM, Paul Harrison <c...@austin.rr.com> wrote: Smskannel.conf file: http://www.curesport.com/smskannel.conf kannel.conf file: http://www.curesport.com/kannel.conf In the smskannel.conf. I defined the mblox parameters(smpp-tlv). From: Alejandro Guerrieri [mailto:alejandro.guerri...@gmail.com] Sent: Wednesday, December 15, 2010 1:22 PM To: Paul Harrison Cc: users@kannel.org Subject: Re: Kannel Hrm, the meta-data seems to be all there. Can you post your smpp-tlv groups? Regards, Alex On Wed, Dec 15, 2010 at 8:02 PM, Paul Harrison <c...@austin.rr.com> wrote: http://www.curesport.com/smsbox.log http://www.curesport.com/kannel_access_log.txt http://www.curesport.com/stdout.txt Please let me know if you need anything else. Thank You, Paul From: Alejandro Guerrieri [mailto:alejandro.guerri...@gmail.com] Sent: Wednesday, December 15, 2010 12:09 PM To: Paul Harrison Cc: users@kannel.org Subject: Re: Kannel Can you provide log entries showing the submit_sm PDU and surroundings? Regards, Alex On Wed, Dec 15, 2010 at 6:50 PM, Paul Harrison <c...@austin.rr.com> wrote: I have been picking at this for a few days now. I have no clue why I keep getting that error as I'm passing the meta data in the request. From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On Behalf Of Paul Harrison Sent: Wednesday, December 15, 2010 10:38 AM To: 'Alejandro Guerrieri' Cc: users@kannel.org Subject: RE: Kannel I read the UG on that. I'm passing the meta-data but I still get the error from the below email in red. http://192.168.1.103:13013/cgi-bin/sendsms?password=foobar <http://192.168.1.103:13013/cgi-bin/sendsms?password=foobar&smsc=psms&to=151 23334444&username=tester&from=54322&text=hello+from+local&meta-data=%3Fsmpp- tlv%3FMBoperator%3D31003%26MBbilling%3D0%26MBserviceId%3D26330%26MBprogram%3 Dstdrt> &smsc=psms&to=15123334444&username=tester&from=12345&text=hello+from+local&m eta-data=%3Fsmpp-tlv%3FMBoperator%3D31003%26MBbilling%3D0%26MBserviceId%3D26 330%26MBprogram%3Dstdrt Any help is greatly appreciated. From: Alejandro Guerrieri [mailto:alejandro.guerri...@gmail.com] Sent: Wednesday, December 15, 2010 10:35 AM To: Paul Harrison Cc: Abdul Basit; users@kannel.org Subject: Re: Kannel You need to configure those parameters as meta-data, and pass them on the request. Read the meta-data section on the UG for the details. Regards, Alex On Wed, Dec 15, 2010 at 5:26 PM, Paul Harrison <c...@austin.rr.com> wrote: I get the following error: 2010-12-15 10:56:34 [30493] [7] WARNING: SMPP: PDU NULL terminated string (message_id) has no NULL. 2010-12-15 10:56:34 [30493] [7] ERROR: SMPP[psms]: SMSC returned error code 0x0000042a (Vendor-specific error, please refer to your SMPP provider) in response to submit_sm. I talked to mblox and they said I'm not passing the operator and billing information to them. I doubt they are getting the MBserviceid and MBProgram either. Mblox now requires the tag program=>stdrt. How do I fix this? UG? Thanks, Paul From: Abdul Basit [mailto:basit.e...@gmail.com] Sent: Wednesday, December 15, 2010 10:15 AM To: Paul Harrison Cc: users@kannel.org Subject: Re: Kannel Good. keep on reading UG. On Wed, Dec 15, 2010 at 9:10 PM, Paul Harrison <c...@austin.rr.com> wrote: I start kannel using the following code. /usr/local/sbin/bearerbox -v 1 --pid-file /var/run/kannel.pid /usr/local/etc/smskannel.conf & sleep 5 /usr/local/sbin/smsbox -v 1 /usr/local/etc/smskannel.conf & Thanks, Paul From: Paul Harrison [mailto:c...@austin.rr.com] Sent: Wednesday, December 15, 2010 10:02 AM To: users@kannel.org Subject: Kannel Hi Team, I downloaded Kannel using the following options. SVN access to source code... svn co https://svn.kannel.org/ <https://svn.kannel.org/%3cproject%3e/trunk> <project>/trunk Smskannel.conf file: http://www.curesport.com/smskannel.conf kannel.conf file: http://www.curesport.com/kannel.conf In the smskannel.conf. I defined the mblox parameters. url I'm using: http://192.168.1.103:13013/cgi-bin/sendsms?password=foobar <http://192.168.1.103:13013/cgi-bin/sendsms?password=foobar&smsc=psms&to=151 23334444&username=tester&from=54322&text=hello+from+local&meta-data=%3Fsmpp- tlv%3FMBoperator%3D31003%26MBbilling%3D0%26MBserviceId%3D26330%26MBprogram%3 Dstdrt> &smsc=psms&to=15123334444&username=tester&from=12345&text=hello+from+local&m eta-data=%3Fsmpp-tlv%3FMBoperator%3D31003%26MBbilling%3D0%26MBserviceId%3D26 330%26MBprogram%3Dstdrt When I invoke the above url. I get the below error message : [r...@node01 etc]# 2010-12-15 10:56:34 [30507] [3] INFO: smsbox: Got HTTP request </cgi-bin/sendsms> from <192.168.1.116> 2010-12-15 10:56:34 [30507] [3] INFO: sendsms used by <tester> 2010-12-15 10:56:34 [30507] [3] INFO: sendsms sender:<tester:53985> (192.168.1.116) to:<15126366987> msg:<hello from local> 2010-12-15 10:56:34 [30493] [7] WARNING: SMPP: PDU NULL terminated string (message_id) has no NULL. 2010-12-15 10:56:34 [30493] [7] ERROR: SMPP[psms]: SMSC returned error code 0x0000042a (Vendor-specific error, please refer to your SMPP provider) in response to submit_sm. I talked to mblox and they said I'm not passing the operator and billing information to them. I doubt they are getting the MBserviceid and MBProgram either. Mblox now requires the tag program=>stdrt. Can someone please help me? It would be greatly appreciated. Thanks, Paul -- Regards, Abdul Basit | +92 32 1416 4196 | +92 30 0841 1445
