Sorry, correction;

If YES, why do you need smsbox-route?
On Wed, Dec 15, 2010 at 11:12 AM, Elton Hoxha <elt...@gmail.com> wrote:

> Are you running a single instance of smsbox? If not, why do you need
> smsbox-route?
>
> Try to remove that group and see if the incoming sms will hit your
> application.
>
>
>
>
> On Wed, Dec 15, 2010 at 11:05 AM, Miguel Duarte <migueldu...@gmail.com>wrote:
>
>> Its a smsbox-id, which is the name in the smsbox and smsbox-route.
>> And the other is my shortcode.
>>
>>
>>
>> On Wed, Dec 15, 2010 at 12:03 PM, Elton Hoxha <elt...@gmail.com> wrote:
>>
>>> What is this ID?
>>>
>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Adding smsbox routing to id
>>> <vodacom> for receiver no <84134134>
>>>
>>>   On Wed, Dec 15, 2010 at 10:55 AM, Miguel Duarte <migueldu...@gmail.com
>>> > wrote:
>>>
>>>> Hello,
>>>>
>>>> Thanks for helping me.
>>>>
>>>> Here is the bearerbox.log:
>>>>
>>>>
>>>> 2010-12-15 11:50:32 [22909] [0] INFO: Added logfile
>>>> `/var/log/kannel/bearerbox.log' with level `0'.
>>>> 2010-12-15 11:50:32 [22909] [0] INFO: SSL not supported, no SSL
>>>> initialization done.
>>>> 2010-12-15 11:50:32 [22909] [0] INFO: HTTP: Opening server at port
>>>> 13000.
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 1
>>>> (gwlib/fdset.c:poller)
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 2
>>>> (gwlib/http.c:server_thread)
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 3
>>>> (gw/bb_http.c:httpadmin_run)
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: starting smsbox connection module
>>>> 2010-12-15 11:50:32 [22909] [0] INFO: BOXC: 'smsbox-max-pending' not
>>>> set, using default (100).
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Adding smsbox routing to id
>>>> <vodacom> for receiver no <84134134>
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 4
>>>> (gw/bb_boxc.c:sms_to_smsboxes)
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 5
>>>> (gw/bb_boxc.c:smsboxc_run)
>>>> 2010-12-15 11:50:32 [22909] [0] INFO: Set SMS resend frequency to 60
>>>> seconds.
>>>> 2010-12-15 11:50:32 [22909] [0] INFO: SMS resend retry set to unlimited.
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: MO concatenated message handling
>>>> enabled
>>>> 2010-12-15 11:50:32 [22909] [0] INFO: DLR rerouting for smsc id
>>>> <internal> disabled.
>>>> 2010-12-15 11:50:32 [22909] [0] WARNING: SMPP: obsolete system-id
>>>> variable is set, use smsc-username instead.
>>>> 2010-12-15 11:50:32 [22909] [0] WARNING: SMPP: smsc-username not set,
>>>> using system-id instead
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 6
>>>> (gw/smsc/smsc_smpp.c:io_thread)
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 7
>>>> (gw/bb_smscconn.c:sms_router)
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: starting UDP sender/receiver
>>>> module
>>>> 2010-12-15 11:50:32 [22909] [0] INFO: Adding interface *
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: udpc_create: Bound to UDP <
>>>> 0.0.0.0:9200>
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 8
>>>> (gw/bb_udp.c:udp_receiver)
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 9
>>>> (gw/bb_udp.c:udp_sender)
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: udpc_create: Bound to UDP <
>>>> 0.0.0.0:9201>
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 10
>>>> (gw/bb_udp.c:udp_receiver)
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 11
>>>> (gw/bb_udp.c:udp_sender)
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: starting wapbox connection module
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 12
>>>> (gw/bb_boxc.c:wdp_to_wapboxes)
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 13
>>>> (gw/bb_boxc.c:wapboxc_run)
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: starting WDP router
>>>> 2010-12-15 11:50:32 [22909] [0] DEBUG: Started thread 14
>>>> (gw/bearerbox.c:wdp_router)
>>>> 2010-12-15 11:50:32 [22909] [0] INFO:
>>>> ----------------------------------------
>>>> 2010-12-15 11:50:32 [22909] [0] INFO: Kannel bearerbox II version 1.5.0
>>>> starting
>>>> 2010-12-15 11:50:32 [22909] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
>>>> maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [2] DEBUG: Thread 2
>>>> (gwlib/http.c:server_thread) maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [2] DEBUG: HTTP: Including port 13000, fd 7
>>>> for polling in server thread
>>>> 2010-12-15 11:50:32 [22909] [3] DEBUG: Thread 3
>>>> (gw/bb_http.c:httpadmin_run) maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [4] DEBUG: Thread 4
>>>> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [5] DEBUG: Thread 5
>>>> (gw/bb_boxc.c:smsboxc_run) maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [0] INFO: MAIN: Start-up done, entering
>>>> mainloop
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG: Thread 6
>>>> (gw/smsc/smsc_smpp.c:io_thread) maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG: Connecting to <192.168.1.100>
>>>> 2010-12-15 11:50:32 [22909] [7] DEBUG: Thread 7
>>>> (gw/bb_smscconn.c:sms_router) maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [8] DEBUG: Thread 8
>>>> (gw/bb_udp.c:udp_receiver) maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [9] DEBUG: Thread 9 (gw/bb_udp.c:udp_sender)
>>>> maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [10] DEBUG: Thread 10
>>>> (gw/bb_udp.c:udp_receiver) maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [11] DEBUG: Thread 11
>>>> (gw/bb_udp.c:udp_sender) maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [12] DEBUG: Thread 12
>>>> (gw/bb_boxc.c:wdp_to_wapboxes) maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [13] DEBUG: Thread 13
>>>> (gw/bb_boxc.c:wapboxc_run) maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [14] DEBUG: Thread 14
>>>> (gw/bearerbox.c:wdp_router) maps to pid 22909.
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG: SMPP[internal]: Sending PDU:
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG: SMPP PDU 0x246e460 dump:
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   type_name: bind_transceiver
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   command_id: 9 = 0x00000009
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   command_status: 0 = 0x00000000
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   sequence_number: 1 = 0x00000001
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   system_id: <HIDDEN>
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   password: <HIDDEN>
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   system_type: "default"
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   interface_version: 52 =
>>>> 0x00000034
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   addr_ton: 0 = 0x00000000
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   addr_npi: 0 = 0x00000000
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   address_range: NULL
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG: SMPP PDU dump ends.
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG: SMPP[internal]: Got PDU:
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG: SMPP PDU 0x246dde0 dump:
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   type_name:
>>>> bind_transceiver_resp
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   command_id: 2147483657 =
>>>> 0x80000009
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   command_status: 0 = 0x00000000
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   sequence_number: 1 = 0x00000001
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG:   system_id: "ttvsmsc"
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG: SMPP PDU dump ends.
>>>> 2010-12-15 11:50:32 [22909] [6] DEBUG: SMPP[internal]: throughput
>>>> (0.00,0.00)
>>>> 2010-12-15 11:50:33 [22909] [13] INFO: Client connected from <127.0.0.1>
>>>> 2010-12-15 11:50:33 [22909] [13] DEBUG: Started thread 15
>>>> (gw/bb_boxc.c:function)
>>>> 2010-12-15 11:50:33 [22909] [15] DEBUG: Thread 15
>>>> (gw/bb_boxc.c:function) maps to pid 22909.
>>>> 2010-12-15 11:50:33 [22909] [15] DEBUG: setting up systems for new
>>>> wapbox
>>>> 2010-12-15 11:50:33 [22909] [15] DEBUG: Started thread 16
>>>> (gw/bb_boxc.c:boxc_sender)
>>>> 2010-12-15 11:50:33 [22909] [16] DEBUG: Thread 16
>>>> (gw/bb_boxc.c:boxc_sender) maps to pid 22909.
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG: SMPP[internal]: throughput
>>>> (0.00,0.00)
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG: SMPP[internal]: Got PDU:
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG: SMPP PDU 0x246f3b0 dump:
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG:   type_name: enquire_link
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG:   command_id: 21 = 0x00000015
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG:   command_status: 0 = 0x00000000
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG:   sequence_number: 2 = 0x00000002
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG: SMPP PDU dump ends.
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG: SMPP[internal]: Sending PDU:
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG: SMPP PDU 0x246fa80 dump:
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG:   type_name: enquire_link_resp
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG:   command_id: 2147483669 =
>>>> 0x80000015
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG:   command_status: 0 = 0x00000000
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG:   sequence_number: 2 = 0x00000002
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG: SMPP PDU dump ends.
>>>> 2010-12-15 11:50:52 [22909] [6] DEBUG: SMPP[internal]: throughput
>>>> (0.00,0.00)
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG: SMPP[internal]: Sending enquire
>>>> link:
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG: SMPP PDU 0x246f380 dump:
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG:   type_name: enquire_link
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG:   command_id: 21 = 0x00000015
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG:   command_status: 0 = 0x00000000
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG:   sequence_number: 2 = 0x00000002
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG: SMPP PDU dump ends.
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG: SMPP[internal]: throughput
>>>> (0.00,0.00)
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG: SMPP[internal]: throughput
>>>> (0.00,0.00)
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG: SMPP[internal]: Got PDU:
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG: SMPP PDU 0x246f380 dump:
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG:   type_name: enquire_link_resp
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG:   command_id: 2147483669 =
>>>> 0x80000015
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG:   command_status: 0 = 0x00000000
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG:   sequence_number: 2 = 0x00000002
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG: SMPP PDU dump ends.
>>>> 2010-12-15 11:51:02 [22909] [6] DEBUG: SMPP[internal]: throughput
>>>> (0.00,0.00)
>>>> 2010-12-15 11:51:32 [22909] [6] DEBUG: SMPP[internal]: Sending enquire
>>>> link:
>>>> 2010-12-15 11:51:32 [22909] [6] DEBUG: SMPP PDU 0x246f380 dump:
>>>> 2010-12-15 11:51:32 [22909] [6] DEBUG:   type_name: enquire_link
>>>> 2010-12-15 11:51:32 [22909] [6] DEBUG:   command_id: 21 = 0x00000015
>>>> 2010-12-15 11:51:32 [22909] [6] DEBUG:   command_status: 0 = 0x00000000
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG: SMPP PDU 0x246f380 dump:
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   type_name: deliver_sm
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   command_id: 5 = 0x00000005
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   command_status: 0 = 0x00000000
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   sequence_number: 5 = 0x00000005
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   service_type: NULL
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   source_addr_ton: 1 = 0x00000001
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   source_addr_npi: 1 = 0x00000001
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   source_addr: "258849902931"
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   dest_addr_ton: 1 = 0x00000001
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   dest_addr_npi: 1 = 0x00000001
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   destination_addr: "84134134"
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   esm_class: 0 = 0x00000000
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   protocol_id: 0 = 0x00000000
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   priority_flag: 0 = 0x00000000
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   schedule_delivery_time: NULL
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   validity_period: NULL
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   registered_delivery: 0 =
>>>> 0x00000000
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   replace_if_present_flag: 0 =
>>>> 0x00000000
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   data_coding: 0 = 0x00000000
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   sm_default_msg_id: 0 =
>>>> 0x00000000
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   sm_length: 4 = 0x00000004
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   short_message: "This is just a
>>>> message"
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG: SMPP PDU dump ends.
>>>> 2010-12-15 11:53:47 [22909] [6] WARNING: smsbox_list empty!
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG: SMPP[internal]: Sending PDU:
>>>> 2010-12-15 11:53:47 [22909] [6] WARNING: smsbox_list empty!
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG: SMPP[internal]: Sending PDU:
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG: SMPP PDU 0x2473f60 dump:
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   type_name: deliver_sm_resp
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   command_id: 2147483653 =
>>>> 0x80000005
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   command_status: 0 = 0x00000000
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   sequence_number: 5 = 0x00000005
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG:   message_id: NULL
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG: SMPP PDU dump ends.
>>>> 2010-12-15 11:53:47 [22909] [6] DEBUG: SMPP[internal]: throughput
>>>> (0.00,0.00)
>>>> 2010-12-15 11:53:47 [22909] [4] WARNING: smsbox_list empty!
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG: SMPP[internal]: throughput
>>>> (0.00,0.00)
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG: SMPP[internal]: Got PDU:
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG: SMPP PDU 0x246f380 dump:
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG:   type_name: enquire_link
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG:   command_id: 21 = 0x00000015
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG:   command_status: 0 = 0x00000000
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG:   sequence_number: 6 = 0x00000006
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG: SMPP PDU dump ends.
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG: SMPP[internal]: Sending PDU:
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG: SMPP PDU 0x2473f60 dump:
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG:   type_name: enquire_link_resp
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG:   command_id: 2147483669 =
>>>> 0x80000015
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG:   command_status: 0 = 0x00000000
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG:   sequence_number: 6 = 0x00000006
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG: SMPP PDU dump ends.
>>>> 2010-12-15 11:53:52 [22909] [6] DEBUG: SMPP[internal]: throughput
>>>> (0.00,0.00)
>>>>
>>>>
>>>>
>>>>
>>>> On Wed, Dec 15, 2010 at 11:15 AM, Mohammed Saleem <
>>>> mohammedsl...@gmail.com> wrote:
>>>>
>>>>>
>>>>>
>>>>> WARNING: smsbox_list empty! is thrown when there is no smsbox
>>>>> connecting to the bearerbox or there is no route to any connected smsbox, 
>>>>> so
>>>>> yes it is needed
>>>>>
>>>>>
>>>>> please post the log for bearerbox and smsbox  log files
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Best Regards,
>>>>> Mohammed M I Sleem
>>>>>
>>>>> http://www.abusleem.net  - Personal blog
>>>>>
>>>>> http://www.freakle.com - The Search Freak <http://www.colorle.com/>
>>>>>
>>>>>
>>>>>
>>>>>   On Wed, Dec 15, 2010 at 10:56 AM, Elton Hoxha <elt...@gmail.com>wrote:
>>>>>
>>>>>> smsbox-route is not needed in this case, remove that group and try
>>>>>> again.
>>>>>>
>>>>>>
>>>>>> On Wed, Dec 15, 2010 at 9:43 AM, Miguel Duarte <migueldu...@gmail.com
>>>>>> > wrote:
>>>>>>
>>>>>>> Hello Elton,
>>>>>>>
>>>>>>> Still pretty the same.
>>>>>>> I noticed since I introduced the smsbox-route I'm not receiving the
>>>>>>> delivery confirmation in my mobile to messages sent to my shortcode.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Dec 15, 2010 at 10:33 AM, Elton Hoxha <elt...@gmail.com>wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> Remove keyword =, you are already using regex instead.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Dec 15, 2010 at 9:28 AM, Miguel Duarte <
>>>>>>>> migueldu...@gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>> I checked the UG, added a smsbox-route with the same smsbox-id as
>>>>>>>>> my smsbox. But still not working!
>>>>>>>>> What am I missing?
>>>>>>>>>
>>>>>>>>> here is my configuration:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> group = core
>>>>>>>>> admin-port = 13000
>>>>>>>>> admin-password = sucker
>>>>>>>>> admin-deny-ip = "*.*.*.*"
>>>>>>>>> admin-allow-ip = "192.168.1.1"
>>>>>>>>> wapbox-port = 13002
>>>>>>>>> wdp-interface-name = "*"
>>>>>>>>> log-file = "/var/log/kannel/bearerbox.log"
>>>>>>>>> box-deny-ip = "*.*.*.*"
>>>>>>>>> box-allow-ip = "127.0.0.1"
>>>>>>>>> dlr-storage = internal
>>>>>>>>> smsbox-port = 13014
>>>>>>>>>
>>>>>>>>> group = wapbox
>>>>>>>>> bearerbox-host = localhost
>>>>>>>>> log-file = "/var/log/kannel/wapbox.log"
>>>>>>>>>
>>>>>>>>> group=smsc
>>>>>>>>> smsc=smpp
>>>>>>>>> smsc-id=internal
>>>>>>>>> interface-version=34
>>>>>>>>> host=192.168.1.100
>>>>>>>>> port=5016
>>>>>>>>> system-id=<HIDDEN>
>>>>>>>>> smsc-password=<HIDDEN>
>>>>>>>>> system-type=default
>>>>>>>>> transceiver-mode=1
>>>>>>>>>
>>>>>>>>> group = sendsms-user
>>>>>>>>> username = <HIDDEN>
>>>>>>>>> password = <HIDDEN>
>>>>>>>>>
>>>>>>>>> group = smsbox
>>>>>>>>> smsbox-id = myID
>>>>>>>>>
>>>>>>>>> bearerbox-host = 127.0.0.1
>>>>>>>>> sendsms-port = 13013
>>>>>>>>> log-level = 0
>>>>>>>>> global-sender = 88145
>>>>>>>>>
>>>>>>>>> group = smsbox-route
>>>>>>>>> smsbox-id = myID
>>>>>>>>> shortcode = "84135"
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> group = sms-service
>>>>>>>>> keyword =
>>>>>>>>> keyword-regex = .*
>>>>>>>>> catch-all = yes
>>>>>>>>> max-messages = 0
>>>>>>>>> get-url = "http://localhost/sendsms.php?to=%p&msg=%a";
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>   On Wed, Dec 15, 2010 at 9:02 AM, Mohammed Saleem <
>>>>>>>>> mohammedsl...@gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> you need to add a smsbox-route group, check the UG for more info
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Best Regards,
>>>>>>>>>> Mohammed M I Sleem
>>>>>>>>>>
>>>>>>>>>> http://www.abusleem.net  - Personal blog
>>>>>>>>>>
>>>>>>>>>> http://www.freakle.com - The Search Freak<http://www.colorle.com/>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Dec 15, 2010 at 8:20 AM, Miguel Duarte <
>>>>>>>>>> migueldu...@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hello,
>>>>>>>>>>>
>>>>>>>>>>> It seems that kannel is not forwarding the SMS it receives from
>>>>>>>>>>> the SMPP to an external website (php).
>>>>>>>>>>> I only found this that might be interesting in the bearerbox.log
>>>>>>>>>>> -> [4] WARNING: smsbox_list empty!
>>>>>>>>>>> I can see in the bearerbox.log that its receiving the message. In
>>>>>>>>>>> the apache logs I can see no communication tentative from kannel.
>>>>>>>>>>>
>>>>>>>>>>> I would appreciate any help.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Here is my configuration from kannel.conf:
>>>>>>>>>>>
>>>>>>>>>>> group = core
>>>>>>>>>>> admin-port = 13000
>>>>>>>>>>> admin-password = sucker
>>>>>>>>>>> admin-deny-ip = "*.*.*.*"
>>>>>>>>>>> admin-allow-ip = "192.168.1.1"
>>>>>>>>>>> wapbox-port = 13002
>>>>>>>>>>> wdp-interface-name = "*"
>>>>>>>>>>> log-file = "/var/log/kannel/bearerbox.log"
>>>>>>>>>>> box-deny-ip = "*.*.*.*"
>>>>>>>>>>> box-allow-ip = "127.0.0.1"
>>>>>>>>>>> dlr-storage = internal
>>>>>>>>>>> smsbox-port = 13014
>>>>>>>>>>>
>>>>>>>>>>> group = wapbox
>>>>>>>>>>> bearerbox-host = localhost
>>>>>>>>>>> log-file = "/var/log/kannel/wapbox.log"
>>>>>>>>>>>
>>>>>>>>>>> group=smsc
>>>>>>>>>>> smsc=smpp
>>>>>>>>>>> smsc-id=internal
>>>>>>>>>>> interface-version=34
>>>>>>>>>>> host=192.168.1.100
>>>>>>>>>>> port=5016
>>>>>>>>>>> system-id=<HIDDEN>
>>>>>>>>>>> smsc-password=<HIDDEN>
>>>>>>>>>>> system-type=default
>>>>>>>>>>> transceiver-mode=1
>>>>>>>>>>>
>>>>>>>>>>> group = sendsms-user
>>>>>>>>>>> username = usertest
>>>>>>>>>>> password = passwd1
>>>>>>>>>>>
>>>>>>>>>>> group = smsbox
>>>>>>>>>>> bearerbox-host = 127.0.0.1
>>>>>>>>>>> sendsms-port = 13013
>>>>>>>>>>> log-level = 0
>>>>>>>>>>> global-sender = 88135
>>>>>>>>>>>
>>>>>>>>>>> group = sms-service
>>>>>>>>>>> keyword =
>>>>>>>>>>> keyword-regex = .*
>>>>>>>>>>> catch-all = yes
>>>>>>>>>>> max-messages = 0
>>>>>>>>>>> get-url = "http://localhost/sendsms.php?to=%p&msg=%a";
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

Reply via email to