Hi,
Please read UG. There is a detailed section about modem initialization. If
still having problems, please post specific questions to this list.
bR,
Nikos
----- Original Message -----
From: "Matt Wiseman" <[email protected]>
To: "Alex" <[email protected]>
Cc: <[email protected]>
Sent: Monday, November 08, 2010 12:28 PM
Subject: Re: Errors with bearerbox
That worked, but still having an issue.. I'll paste the log here as well
as my config file (phone numbers changed to protect the guilty). The
modem I'm trying to use is:
http://www.dealextreme.com/details.dx/sku.12057
Which appears to be a BenQ M32 GSM/GPRS Wireless module
Any help would be appreciated.
My Log:
2010-11-08 02:23:40 [4622] [6] INFO: AT2[gsm_modem]: opening device
2010-11-08 02:23:40 [4622] [6] DEBUG: AT2[gsm_modem]: device opened.
Telnet mode = 0
2010-11-08 02:23:40 [4622] [6] DEBUG: AT2[gsm_modem]: device opened
2010-11-08 02:23:40 [4622] [6] INFO: AT2[gsm_modem]: Logging in
2010-11-08 02:23:41 [4622] [6] INFO: AT2[gsm_modem]: init device
2010-11-08 02:23:41 [4622] [6] INFO: AT2[gsm_modem]: speed set to 57600
2010-11-08 02:23:41 [4622] [6] DEBUG: AT2[gsm_modem]: --> ATZ^M
2010-11-08 02:23:41 [4622] [6] DEBUG: AT2[gsm_modem]: <-- OK
2010-11-08 02:23:41 [4622] [6] DEBUG: AT2[gsm_modem]: --> AT^M
2010-11-08 02:23:41 [4622] [6] DEBUG: AT2[gsm_modem]: <-- AT
2010-11-08 02:23:41 [4622] [6] DEBUG: AT2[gsm_modem]: <-- OK
2010-11-08 02:23:41 [4622] [6] DEBUG: AT2[gsm_modem]: --> AT&F^M
2010-11-08 02:23:41 [4622] [6] DEBUG: AT2[gsm_modem]: <-- AT&F
2010-11-08 02:23:41 [4622] [6] DEBUG: AT2[gsm_modem]: <-- OK
2010-11-08 02:23:41 [4622] [6] DEBUG: AT2[gsm_modem]: --> ATE0^M
2010-11-08 02:23:41 [4622] [6] DEBUG: AT2[gsm_modem]: <-- ATE0
2010-11-08 02:23:41 [4622] [6] DEBUG: AT2[gsm_modem]: <-- OK
2010-11-08 02:23:41 [4622] [6] DEBUG: AT2[gsm_modem]: --> AT+IFC=2,2^M
2010-11-08 02:23:42 [4622] [6] DEBUG: AT2[gsm_modem]: <-- OK
2010-11-08 02:23:42 [4622] [6] DEBUG: AT2[gsm_modem]: --> AT+CMGF=0^M
2010-11-08 02:23:42 [4622] [6] DEBUG: AT2[gsm_modem]: <-- OK
2010-11-08 02:23:42 [4622] [6] DEBUG: AT2[gsm_modem]: --> AT+CSMS=?^M
2010-11-08 02:23:42 [4622] [6] DEBUG: AT2[gsm_modem]: <-- +CSMS: (0,1)
2010-11-08 02:23:42 [4622] [6] DEBUG: AT2[gsm_modem]: <-- OK
2010-11-08 02:23:42 [4622] [6] INFO: AT2[gsm_modem]: Phase 2+ is
supported
2010-11-08 02:23:42 [4622] [6] DEBUG: AT2[gsm_modem]: --> AT+CSMS=1^M
2010-11-08 02:23:42 [4622] [6] DEBUG: AT2[gsm_modem]: <-- ERROR
2010-11-08 02:23:42 [4622] [6] ERROR: AT2[gsm_modem]: Generic error:
ERROR
2010-11-08 02:23:42 [4622] [6] ERROR: AT2[gsm_modem]: Initialization of
device failed.
2010-11-08 02:23:42 [4622] [6] INFO: AT2[gsm_modem]: Closing device
My Config:
# CORE BEARERBOX/KANNEL CONFIG
group = core
admin-port = 13000
admin-password = admin_pass
status-password = status_pass
log-file = "/var/log/kannel/kannel.log"
# 0 = 'debug', 1 = 'info', 2 = 'warning', 3 = 'error', 4 = 'panic'
log-level = 4
access-log = "/var/log/kannel/core_access.log"
# Wapbox related
wapbox-port = 13002
wdp-interface-name = "*"
# Smsbox related
smsbox-port = 13001
# BASE WAPBOX CONFIG
group = wapbox
bearerbox-host = localhost
# GSM DEVICE FILE INFO
group = smsc
smsc = at
smsc-id = gsm_modem
modemtype = BENQ
device = /dev/ttyUSB0
keepalive = 30
max-error-count = 5
sim-buffering = true
# MODEM CONFIGURATION
group = modems
id = BENQ
name = BENQ
detect-string = "BENQ"
speed = 115200
reset-string = "ATZ"
init-string = "AT+CNMI=1,2,0,1,0;+CMEE=1"
# trying this to see if it resolves errors when the
# modem erroneously returns ERROR to the AT+CPIN? command
no-pin = true
# SMSBOX SETUP
group = smsbox
bearerbox-host = localhost
sendsms-port = 13013
global-sender = 5555555555
log-file = "/var/log/kannel/smsbox.log"
log-level = 4
access-log = "/var/log/kannel/smsbox_access.log"
# SEND-SMS USERS
group = sendsms-user
username = sms_user
password = sms_pass
forced-smsc = gsm_modem
# SMS SERVICES
# there should be default always
group = sms-service
keyword = default
text = "No service specified"
max-messages = 0
catch-all = true
On Mon, 2010-11-08 at 12:07 +0300, Alex wrote:
check for spaces in your config file or post your config file.
On 8 November 2010 12:00, Matt Wiseman <[email protected]> wrote:
I'm currently getting this error trying to start a new install
of
kannel. I've verified the file is there, I chmod'd it to 777
*AND* am
trying to run it as root... still no love. Thoughts?
smsu...@smsserver1:~$ sudo bearerbox --verbosity 4
--logfile /var/log/kannel/bearerbox.log /etc/kannel/kannel.conf
[sudo] password for smsuser:
2010-11-08 00:56:33 [4434] [0] PANIC: Couldn't read
configuration from
`/etc/kannel/kannel.conf'.
2010-11-08 00:56:33 [4434] [0] PANIC: bearerbox(gw_panic+0xcd)
[0x80cc33d]
2010-11-08 00:56:33 [4434] [0] PANIC: bearerbox(main+0xcf8)
[0x8053148]
2010-11-08 00:56:33 [4434] [0]
PANIC: /lib/libc.so.6(__libc_start_main
+0xe7) [0xb740cce7]
2010-11-08 00:56:33 [4434] [0] PANIC: bearerbox() [0x8051711]
--
Best regards,
Alex
