Hi, I've configured Kannel on Ubuntu and I have no issues if I try to send messages with my clickatell account.
Nevertheless, I'm not able to get Kannel modem configuration right using my Nokia E90 phone. A briefing of the configuration has been included below #SMSC SETUP: Nokia E90 GSM Modem group = smsc smsc = at smsc-id = nokiae90 modemtype = Nokia device=/dev/ttyACM0 speed = 460800 pin = xxxx # Modem SETUP group = modems id = Nokia name = "Nokia" #init-string = "ATZ" init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" #init-string = "AT+CNMI=0,0,0,0,0" #init-string = "AT+CNMI=1,0,1,2,0" detect-string = "Nokia Mobile Phone" need-sleep = true keepalive-cmd = "AT+CBC;+CSQ" The output of status when starting smsbox is shown below: r...@ubu1004:/etc/kannel# lynx -dump "http://localhost:13000/status?password=fcsadmin"; Kannel bearerbox version `1.4.3'. Build `Jun 11 2010 06:46:37', compiler `4.4.3'. System Linux, release 2.6.32-22-generic, version #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010, machine i686. Hostname ubu1004, IP 127.0.1.1. Libxml version 2.7.6. Compiled with MySQL 5.1.41, using MySQL 5.1.41. Using native malloc. Status: running, uptime 0d 0h 14m 35s WDP: received 0 (0 queued), sent 0 (0 queued) SMS: received 0 (0 queued), sent 0 (1 queued), store size 1 SMS: inbound (0.00,0.00,0.00) msg/sec, outbound (0.00,0.00,0.00) msg/sec DLR: 0 queued, using internal storage Box connections: smsbox:fcs_smsbox, IP 127.0.0.1 (0 queued), (on-line 0d 0h 14m 33s) SMSC connections: nokiae90 AT2[nokiae90] (connecting, rcvd 0, sent 0, failed 0, queued 0 msgs) I'm able to send SMS with no issue using "gsmsendsms -d /dev/ttyACM0 0692032105 “hello” The output of "wvdialconf" command is included below ttyACM0<*1>: Modem Identifier: ATI -- Nokia ttyACM0<*1>: Speed 4800: AT -- OK ttyACM0<*1>: Speed 9600: AT -- OK ttyACM0<*1>: Speed 19200: AT -- OK ttyACM0<*1>: Speed 38400: AT -- OK ttyACM0<*1>: Speed 57600: AT -- OK ttyACM0<*1>: Speed 115200: AT -- OK ttyACM0<*1>: Speed 230400: AT -- OK ttyACM0<*1>: Speed 460800: AT -- OK ttyACM0<*1>: Max speed is 460800; that should be safe. ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found an USB modem on /dev/ttyACM0. Modem configuration written to /etc/wvdial.conf. ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" I would greatly appreciate an advice from a senior person as to how I can get the nokia modem status to on-line. Thanks and regards, Gjergji
