Hi,
Please read user guide before addressing this list. If there are a lot of
pending SMS, bb will try to send them before dying. This may take a few
minutes. With a second kill you force it to die, regardless of its state.
Not recommended.
BR,
Nikos
----- Original Message -----
From: ""Peter Valdemar Morch (Lists)"" <4ux6as...@sneakemail.com>
To: <users@kannel.org>
Sent: Monday, June 07, 2010 5:14 PM
Subject: Can't stop bearerbox?
We have bearerbox running fine. All works as it should. Several clients
are connecting to it.
But when we try to stop by sending a kill signal (via start-stop-daemon
on debian), the process doesn't terminate. Two more kill signals are
required to terminate the process and we get "PANIC: Cannot die by its
own will" in bearerbox.log
The attached bearerbox.log is a complete run from startup, over first
kill (at 15:44:21) to second kill (which didn't log anything) to the
third kill (at 15:45:06) which PANIC-ed.
Because of this,
# /etc/init.d/kannel stop
and
# /etc/init.d/kannel restart
both fail - which we're hoping to remedy.
What can we do to get bearerbox to terminate gracefully? Is this a known
problem?
I don't think it is
http://redmine.kannel.org/issues/517
because all is working fine just before we try to close it down.
Any hints?
Peter
--
Peter Valdemar MΓΈrch
http://www.morch.com
--------------------------------------------------------------------------------
2010-06-07 15:43:30 [31784] [0] INFO: Added logfile
`/var/log/kannel/bearerbox.log' with level `1'.
2010-06-07 15:43:30 [31784] [0] INFO: HTTP: Opening server at port 13000.
2010-06-07 15:43:30 [31784] [0] INFO: BOXC: 'smsbox-max-pending' not set,
using default (100).
2010-06-07 15:43:30 [31784] [0] INFO: Set SMS resend frequency to 60
seconds.
2010-06-07 15:43:30 [31784] [0] INFO: SMS resend retry set to unlimited.
2010-06-07 15:43:30 [31784] [0] INFO: DLR rerouting for smsc id <modem>
disabled.
2010-06-07 15:43:30 [31784] [0] INFO: AT2[modem]: configuration doesn't
show modemtype. will autodetect
2010-06-07 15:43:30 [31784] [0] INFO: Adding interface *
2010-06-07 15:43:30 [31784] [6] INFO: AT2[modem]: opening device
2010-06-07 15:43:30 [31784] [0]
INFO: ----------------------------------------
2010-06-07 15:43:30 [31784] [0] INFO: Kannel bearerbox II version 1.4.3
starting
2010-06-07 15:43:30 [31784] [0] INFO: MAIN: Start-up done, entering
mainloop
2010-06-07 15:43:31 [31784] [13] INFO: Client connected from <127.0.0.1>
2010-06-07 15:43:31 [31784] [5] INFO: Client connected from <127.0.0.1>
2010-06-07 15:43:31 [31784] [6] INFO: AT2[modem]: speed set to 9600
2010-06-07 15:43:33 [31784] [6] INFO: AT2[modem]: Phase 2+ is supported
2010-06-07 15:43:33 [31784] [6] INFO: AT2[modem]: Closing device
2010-06-07 15:43:33 [31784] [6] INFO: AT2[modem]: opening device
2010-06-07 15:43:34 [31784] [6] INFO: AT2[modem]: Logging in
2010-06-07 15:43:35 [31784] [6] INFO: AT2[modem]: init device
2010-06-07 15:43:35 [31784] [6] INFO: AT2[modem]: speed set to 9600
2010-06-07 15:43:36 [31784] [6] INFO: AT2[modem]: Phase 2+ is supported
2010-06-07 15:43:36 [31784] [6] INFO: AT2[modem]: AT SMSC successfully
opened.
2010-06-07 15:43:52 [31784] [13] INFO: Client connected from
<172.22.225.91>
2010-06-07 15:43:53 [31784] [5] INFO: Client connected from
<172.22.225.91>
2010-06-07 15:43:53 [31784] [13] INFO: Client connected from
<172.22.216.158>
2010-06-07 15:43:54 [31784] [5] INFO: Client connected from
<172.22.216.158>
2010-06-07 15:43:54 [31784] [13] INFO: Client connected from
<172.22.216.69>
2010-06-07 15:43:55 [31784] [5] INFO: Client connected from
<172.22.225.40>
2010-06-07 15:43:55 [31784] [13] INFO: Client connected from
<172.22.225.40>
2010-06-07 15:43:56 [31784] [5] INFO: Client connected from
<172.22.216.69>
2010-06-07 15:44:21 [31784] [17] INFO: Connection closed by the box
<127.0.0.1>
2010-06-07 15:44:21 [31784] [15] INFO: Connection closed by the box
<127.0.0.1>
2010-06-07 15:44:21 [31784] [0] WARNING: Killing signal or HTTP admin
command received, shutting down...
2010-06-07 15:44:21 [31784] [13] INFO: Client connected from
<172.22.216.158>
2010-06-07 15:44:22 [31784] [6] INFO: AT2[modem]: Closing device
2010-06-07 15:44:22 [31784] [33] INFO: Connection closed by the box
<172.22.216.69>
2010-06-07 15:44:22 [31784] [25] INFO: Connection closed by the box
<172.22.216.158>
2010-06-07 15:44:22 [31784] [21] INFO: Connection closed by the box
<172.22.225.91>
2010-06-07 15:44:22 [31784] [29] INFO: Connection closed by the box
<172.22.225.40>
2010-06-07 15:44:22 [31784] [5] INFO: Client connected from
<172.22.216.158>
2010-06-07 15:45:06 [31784] [0] PANIC: Cannot die by its own will
2010-06-07 15:45:06 [31784] [0] PANIC: /usr/sbin/bearerbox(gw_panic+0xbc)
[0x80cf8ec]
2010-06-07 15:45:06 [31784] [0] PANIC: /usr/sbin/bearerbox [0x8054248]
2010-06-07 15:45:06 [31784] [0] PANIC: [0xb7ef0400]
2010-06-07 15:45:06 [31784] [0] PANIC: /usr/sbin/bearerbox(main+0xa1d)
[0x8054dbd]
2010-06-07 15:45:06 [31784] [0] PANIC:
/lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7a48455]
2010-06-07 15:45:06 [31784] [0] PANIC: /usr/sbin/bearerbox [0x8053881]
--------------------------------------------------------------------------------
group = core
admin-port = 13000
admin-password = bar
admin-deny-ip = "*.*.*.*"
admin-allow-ip = "127.0.0.1"
wapbox-port = 13002
smsbox-port = 13003
wdp-interface-name = "*"
log-file = "/var/log/kannel/bearerbox.log"
log-level = 1
box-deny-ip = "*.*.*.*"
box-allow-ip =
"127.0.0.1;172.22.225.91;172.22.225.40;172.22.216.69;172.22.216.158"
dlr-storage = internal
group = wapbox
bearerbox-host = 127.0.0.1
log-file = "/var/log/kannel/wapbox.log"
log-level = 1
group = smsc
smsc = at
smsc-id = modem
modemtype = auto
device = /dev/ttyUSB0
speed = 9600
pin = 6869
keepalive = yes
group = modems
id = generic
name = 'Generic Modem'
need-sleep = yes
init-string = AT+CNMI=2,3,3,2,1
enable-hwhs = AT\Q3
group = smsbox
bearerbox-host = 127.0.0.1
sendsms-port = 13099
access-log = "/var/log/kannel/kannel.access"
log-file = "/var/log/kannel/smsbox.log"
log-level = 1
global-sender = 12345678
# Dont matter what global-sender it is, it seems to get set to the real
sender by the SMS senter, but cant be empty
group = sendsms-user
username = CapMon
password = CapMon
concatenation = true
max-messages = 5
group = sms-service
keyword = default
get-url =
"http://localhost/capmon/receiveSms.cgi?sender=%p&text=%r&keyword=%k";
# If the gateway recives a SMS it will check if the first word is capmon
if so , then it will goto the url and return the output
