Hi,
I imagine you have also enabled "sim-buffering" in your smsc definition. Have
you tried setting message-storage = SM?
BR,
Nikos
----- Original Message -----
From: Emmanuel CHANSON
To: users
Sent: Wednesday, May 12, 2010 2:34 AM
Subject: Re: DLR not fw to Kannel when mailling SMS is performed
No, it is a loop done for each destination (dont know if cgi script can
manage multiple destination)
Regards,
Emmanuel
2010/5/11 Benaiad <bena...@gmail.com>
Hi,
Are you sending those messages using one call to the send cgi with multi
destinations in the "to" parameter?
Regards.
--
Benaiad
On Tue, May 11, 2010 at 10:57 PM, Emmanuel CHANSON
<emmanuelchan...@gmail.com> wrote:
If the issue is not well described tell me...I really want to understand
this behavior...
Regards,
Emmanuel
2010/5/11 Emmanuel CHANSON <emmanuelchan...@gmail.com>
I am also getting the following error below during the sending of my
SMS mailling and I don't know if it is linked with this.
Test:
40 SMS were sent, I received the ACK (but no Success/STATUS-REPORT
maybe stored in the mobile) and after that I receive the error: +CMS ERROR: An
unknown error occurred (500)
Alvaro told me it can be an operator restriction (I received a network
error so I change the mobile but same behavior with a different error)
If I stop Kannel then move the kannel.store file somewhere, restart
Kannel and try to send a new single SMS it works !!
So to resume I have 2 issue maybe linked:
- DLR not received into bearerbox, seems blocked in modem.
- SMS mailling that is blocked after let's say 40 SMS sent (I had 80
SMS to send)
don"t if the issue if linked to:
- the fact I send concatened SMS
- the AT+CNMI command that is not correct and DLR are stored in the
mobile and block the MT with the ERROR 500 ?
- others things..
I dont know how to investiguate...
I have previously post my modem.conf
This issue is linked to the post I already send about +CMS ERROR:
Network out of order (38), but changing the mobile does not change anything and
I don't think it is an operator restriction because if I move the kannel;store
file and send a SMS it works...
Regards,
Emmanuel
2010/5/11 Emmanuel CHANSON <emmanuelchan...@gmail.com>
Hello,
I would like to ask the community about this behavior.
I am using a Nokia 6230 as modem.
When I send a single SMS I got the ACK and the STATUS-REPORT,
behavior is Ok.
2010-05-11 13:51:44 [14368] [6] DEBUG: AT2[nokiaphone]: <-- +CDS: 24
2010-05-11 13:51:44 [14368] [6] DEBUG: AT2[nokiaphone]: <--
069186770720F0067C099186773705F2015011311513440150113115134400
2010-05-11 13:51:44 [14368] [6] DEBUG: AT2[nokiaphone]: received
message from SMSC: +687770020
2010-05-11 13:51:44 [14368] [6] DEBUG: AT2[nokiaphone]: got
STATUS-REPORT for message <124>:
When I send let's say 20 SMS using cgi script, I got all the ACK but
no STATUS-REPORT
and I see this in smsc.log:
2010-05-11 13:46:59 [14249] [6] DEBUG: AT2[nokiaphone]: --> AT+CPMS?^M
2010-05-11 13:46:59 [14249] [6] DEBUG: AT2[nokiaphone]: <-- +CPMS:
"ME",0,150,"SM",18,60,"MT",18,210
2010-05-11 13:46:59 [14249] [6] DEBUG: AT2[nokiaphone]: <-- OK
So isn't it my DLRs that are stored in the mobile ? Why aren't they
forwarded to bearerbox ?
My modem config for the modem is the following:
group = modems
id = nokiaphone
name = "Nokia Phone"
detect-string = "Nokia Mobile Phone"
init-string = "AT+CNMI=1,2,0,1,0;+CMEE=1"
need-sleep = true
speed = 460800
keepalive-cmd = "AT+CBC;+CSQ"
enable-mms = true
message-storage = "ME"
Regards,
Emmanuel
--
Emmanuel
CHANSON Emmanuel
Mobile Nouvelle-Calιdonie: +687.77.35.02
Mobile France: +33 (0) 6.68.03.89.56
@email : emmanuelchan...@gmail.com
--
Emmanuel
CHANSON Emmanuel
Mobile Nouvelle-Calιdonie: +687.77.35.02
Mobile France: +33 (0) 6.68.03.89.56
@email : emmanuelchan...@gmail.com
--
Emmanuel
CHANSON Emmanuel
Mobile Nouvelle-Calιdonie: +687.77.35.02
Mobile France: +33 (0) 6.68.03.89.56
@email : emmanuelchan...@gmail.com
