Hi,
Try with a different SIM from another provider. Kannel supports udh for
concatenation, but a few providers use sar, which kannel doesn't support. I
have seen that in SMPP, I am not sure if the same holds for modems.
BR,
Nikos
----- Original Message -----
From: "Jakob Thomsen" <[email protected]>
To: "'Alvaro Cornejo'" <[email protected]>
Cc: <[email protected]>
Sent: Tuesday, March 02, 2010 7:01 PM
Subject: RE: sms-combine-concatenated-mo problem/not working
Thanks for your reply.
I tried as you said, by changing AT+CNMI, so that the GSM Modem (it is a
Siemens MC35i) stores the messages on the modem and then let Kannel fetch
the messages. From the log I can see that Kannel fetches the messages, but
they are still split in parts.
I've looked a bit in the AT command reference for the modem, but I'm not a
AT commands professional, so do you have any good ideas for it?
Jakob
-----Original Message-----
From: Alvaro Cornejo [mailto:[email protected]]
Sent: 1. marts 2010 22:10
To: Jakob Thomsen
Cc: Marcelo Olivas; Alejandro Guerrieri; [email protected]
Subject: Re: sms-combine-concatenated-mo problem/not working
The AT commands are because you are using a modem/phone to act as an
smsc. Marcelo thought you were using another type of smsc.
The problem might come from the phone you send the message from. It
might be that it does not send message over 160chars with the
concatenation information but send the messages as 2 separate sms.
You can see that there is no indication from the modem/phone that the
message is a splitted one, thus kannel did not try to reassemble it.
Check the config of your modem, maybe there is a parameter you can
adjust to do that (CNMI??).
Also you can test if having kannel look for the message (check
sim-buffering parameter) instead of having the modem send the message
to kannel (AT+CNMI) makes any difference.
Hope helps
Alvaro
|----------------------------------------------------------------------
-------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Mon, Mar 1, 2010 at 2:04 PM, Jakob Thomsen <[email protected]> wrote:
> Hmm, strange. The only thing I get in my log is a bunch of AT
commands like
> the following:
>
>
>
> 2010-03-01 19:47:24 [11108] [6] INFO: AT2[/dev/ttyS0]: opening device
>
> 2010-03-01 19:47:24 [11108] [6] DEBUG: AT2[/dev/ttyS0]: device
opened.
> Telnet mode = 0
>
> 2010-03-01 19:47:24 [11108] [6] DEBUG: AT2[/dev/ttyS0]: device opened
>
> 2010-03-01 19:47:24 [11108] [6] INFO: AT2[/dev/ttyS0]: Logging in
>
> 2010-03-01 19:47:24 [11108] [6] INFO: AT2[/dev/ttyS0]: init device
>
> 2010-03-01 19:47:24 [11108] [6] INFO: AT2[/dev/ttyS0]: speed set to
19200
>
> 2010-03-01 19:47:24 [11108] [6] DEBUG: AT2[/dev/ttyS0]: --> ATZ^M
>
> 2010-03-01 19:47:24 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:47:24 [11108] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M
>
> 2010-03-01 19:47:24 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- AT
>
> 2010-03-01 19:47:24 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:47:24 [11108] [6] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M
>
> 2010-03-01 19:47:24 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- AT&F
>
> 2010-03-01 19:47:24 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:47:24 [11108] [6] DEBUG: AT2[/dev/ttyS0]: --> ATE0^M
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- ATE0
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: --> AT\Q3^M
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: -->
AT+CPIN?^M
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CPIN:
READY
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: -->
AT+CMGF=0^M
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: -->
AT+CSMS=?^M
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CSMS:
(0,1)
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:47:25 [11108] [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is
supported
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: -->
AT+CSMS=1^M
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CSMS:
1,1,1
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: -->
> AT+CNMI=3,2,0,1,1^M
>
> 2010-03-01 19:47:25 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:47:25 [11108] [6] INFO: AT2[/dev/ttyS0]: AT SMSC
successfully
> opened.
>
> 2010-03-01 19:47:46 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CMT:
,158
>
> 2010-03-01 19:47:46 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <--
>
06915482810700440A915416174929000001301091741440A00500034C020188D434685
E8797E520721D5E9683DAE57318347EBFD92E10B2AC0629C3EBB71874748514C43A081D
9683CA6EB2BB0E4AAFD765D0DC1E9697E920F803F46E83C875D0FADD6E97E5207A9A0D6
2A6E76275597E06198720542C056A8188C729286904915D2098ED059BB564B0180CB466
BB40319A0E06FBB940D334794E2F83CCF2F49C0E32BFE5
>
> 2010-03-01 19:47:46 [11108] [6] DEBUG: AT2[/dev/ttyS0]: received
message
> from SMSC: +45yyyyyyyy
>
> 2010-03-01 19:47:46 [11108] [6] DEBUG: AT2[/dev/ttyS0]: Numeric
sender
> (international) <+45xxxxxxxx>
>
> 2010-03-01 19:47:46 [11108] [6] DEBUG: AT2[/dev/ttyS0]: User data
length
> read as (160)
>
> 2010-03-01 19:47:46 [11108] [6] DEBUG: AT2[/dev/ttyS0]: Udh decoding
done
> len=154 udhi=1 udhlen=5 udh='_'
>
> 2010-03-01 19:47:46 [11108] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CNMA^M
>
> 2010-03-01 19:47:46 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:47:49 [11108] [6] DEBUG: AT2[/dev/ttyS0]: TP-Validity-
Period:
> 24.0 hours
>
> 2010-03-01 19:47:49 [11108] [6] DEBUG: AT2[/dev/ttyS0]: -->
AT+CMGS=54^M
>
> 2010-03-01 19:47:49 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- >
>
> 2010-03-01 19:47:49 [11108] [6] DEBUG: AT2[/dev/ttyS0]: send command
status:
> 1
>
> 2010-03-01 19:47:49 [11108] [6] DEBUG: AT2[/dev/ttyS0]: -->
>
0011000881161749290000A72FD4F01A647ECB41E4B41BB47EB7DB65373D2C77818875D
03AEC06CDCBA076595E06C11F2097CBE5728100
>
> 2010-03-01 19:47:49 [11108] [6] DEBUG: AT2[/dev/ttyS0]: --> ^Z
>
> 2010-03-01 19:47:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- >
>
> 2010-03-01 19:47:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CMGS:
122
>
> 2010-03-01 19:47:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:47:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: send command
status:
> 0
>
> 2010-03-01 19:47:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CMT:
,148
>
> 2010-03-01 19:47:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <--
>
06915482810700440A915416174929000001301091742440940500034C020240F434BB5
D6693D3EE33A82C07BDDD7372F80C22BB40B0D90B3603ADD92E906CA6ABE55C8A293CCD
6697E720F803B40CD3E5697759AC2ECBCFF3F59B5D76BB40D634A8CD2097E7A035DB058
AD17430980B34B587E5207518047F80C865B7BB0C1297E7EB321984B6A7E720721D7466
C8592077590D2AB3D965F9DC05
>
> 2010-03-01 19:47:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: received
message
> from SMSC: +45 yyyyyyyy
>
> 2010-03-01 19:47:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: Numeric
sender
> (international) <+45xxxxxxxx>
>
> 2010-03-01 19:47:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: User data
length
> read as (148)
>
> 2010-03-01 19:47:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: Udh decoding
done
> len=142 udhi=1 udhlen=5 udh='_'
>
> 2010-03-01 19:47:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CNMA^M
>
> 2010-03-01 19:47:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:54:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CMT:
,158
>
> 2010-03-01 19:54:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <--
>
06915482810700440A915416174929000001301091450540A00500034D020188D434685
E8797E520721D5E9683DAE57318347EBFD92E10B2AC0629C3EBB71874748514C43A081D
9683CA6EB2BB0E4AAFD765D0DC1E9697E920F803F46E83C875D0FADD6E97E5207A9A0D6
2A6E76275597E06198720542C056A8188C729286904915D2098ED059BB564B0180CB466
BB40319A0E06FBB940D334794E2F83CCF2F49C0E32BFE5
>
> 2010-03-01 19:54:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: received
message
> from SMSC: +45yyyyyyyy
>
> 2010-03-01 19:54:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: Numeric
sender
> (international) <+45xxxxxxxx>
>
> 2010-03-01 19:54:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: User data
length
> read as (160)
>
> 2010-03-01 19:54:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: Udh decoding
done
> len=154 udhi=1 udhlen=5 udh='_'
>
> 2010-03-01 19:54:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CNMA^M
>
> 2010-03-01 19:54:54 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:54:56 [11108] [6] DEBUG: AT2[/dev/ttyS0]: TP-Validity-
Period:
> 24.0 hours
>
> 2010-03-01 19:54:56 [11108] [6] DEBUG: AT2[/dev/ttyS0]: -->
AT+CMGS=54^M
>
> 2010-03-01 19:54:56 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- >
>
> 2010-03-01 19:54:56 [11108] [6] DEBUG: AT2[/dev/ttyS0]: send command
status:
> 1
>
> 2010-03-01 19:54:56 [11108] [6] DEBUG: AT2[/dev/ttyS0]: -->
>
0011000881161749290000A72FD4F01A647ECB41E4B41BB47EB7DB65373D2C77818875D
03AEC06CDCBA076595E06C11F2097CBE5728100
>
> 2010-03-01 19:54:56 [11108] [6] DEBUG: AT2[/dev/ttyS0]: --> ^Z
>
> 2010-03-01 19:54:59 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- >
>
> 2010-03-01 19:54:59 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CMGS:
123
>
> 2010-03-01 19:54:59 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
> 2010-03-01 19:54:59 [11108] [6] DEBUG: AT2[/dev/ttyS0]: send command
status:
> 0
>
> 2010-03-01 19:55:18 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CMT:
,148
>
> 2010-03-01 19:55:18 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <--
>
06915482810700440A915416174929000001301091451540940500034D020240F434BB5
D6693D3EE33A82C07BDDD7372F80C22BB40B0D90B3603ADD92E906CA6ABE55C8A293CCD
6697E720F803B40CD3E5697759AC2ECBCFF3F59B5D76BB40D634A8CD2097E7A035DB058
AD17430980B34B587E5207518047F80C865B7BB0C1297E7EB321984B6A7E720721D7466
C8592077590D2AB3D965F9DC05
>
> 2010-03-01 19:55:18 [11108] [6] DEBUG: AT2[/dev/ttyS0]: received
message
> from SMSC: +45yyyyyyyy
>
> 2010-03-01 19:55:18 [11108] [6] DEBUG: AT2[/dev/ttyS0]: Numeric
sender
> (international) <+45xxxxxxxx>
>
> 2010-03-01 19:55:18 [11108] [6] DEBUG: AT2[/dev/ttyS0]: User data
length
> read as (148)
>
> 2010-03-01 19:55:18 [11108] [6] DEBUG: AT2[/dev/ttyS0]: Udh decoding
done
> len=142 udhi=1 udhlen=5 udh='_'
>
> 2010-03-01 19:55:18 [11108] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CNMA^M
>
> 2010-03-01 19:55:18 [11108] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK
>
>
>
> Where xxxxxxxx is my own cellphone number and yyyyyyyy is the number
of the
> sim card in the Siemens MC35i modem
>
>
>
> My setup is using a GSM modem to send out the text messages and it
seems
> that SMPP is something else or am I wrong?
>
>
>
> Best regards
>
>
>
> Jakob
>
>
>
> From: Marcelo Olivas [mailto:[email protected]]
> Sent: 1. marts 2010 19:50
> To: Alejandro Guerrieri
> Cc: Jakob Thomsen; [email protected]
>
> Subject: Re: sms-combine-concatenated-mo problem/not working
>
>
>
> Yup, listen to Alejandro then look at the
/var/log/kannel/bearerbox.log
> let us know!
>
> Marcelo
>
> On Mar 1, 2010, at 1:40 PM, Alejandro Guerrieri wrote:
>
> You need to set the log-level to 0 and look on the smsc's log
afterwards.
>
>
>
> Regards,
>
>
>
> Alex
>
> On Mon, Mar 1, 2010 at 7:25 PM, Jakob Thomsen <[email protected]>
wrote:
>
> Hi Marcelo,
>
>
>
> Thanks for your quick reply. I am probably looking in the wrong
places but I
> haven't been able to find the PDU in either the bearerbox or smsbox
log.
> Where can I find it?
>
>
>
> Regards
>
>
>
> Jakob
>
>
>
>
>
> From: Marcelo Olivas [mailto:[email protected]]
> Sent: 1. marts 2010 19:04
> To: Jakob Thomsen
> Cc: [email protected]
> Subject: Re: sms-combine-concatenated-mo problem/not working
>
>
>
> Jakob, can you please provide the PDU for the MO that the SMSC is
sending?
> If I'm not mistaking you need the esm_class parameter being set.
For
> example, the following PDU doesn't have the esm_class set and
therefore,
> Kannel doesn't know if it should concatenate the message:
>
>
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: SMPP PDU 0xade203a0 dump:
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: type_name: deliver_sm
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: command_id: 5 = 0x00000005
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: command_status: 0 =
0x00000000
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: sequence_number: 12109 =
0x00002f4d
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: service_type: NULL
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: source_addr_ton: 2 =
0x00000002
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: source_addr_npi: 1 =
0x00000001
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: source_addr: "4444199558"
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: dest_addr_ton: 4 =
0x00000004
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: dest_addr_npi: 9 =
0x00000009
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: destination_addr: "55220"
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: esm_class: 0 = 0x00000000
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: protocol_id: 0 = 0x00000000
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: priority_flag: 0 =
0x00000000
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: schedule_delivery_time: NULL
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: validity_period: NULL
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: registered_delivery: 0 =
0x00000000
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: replace_if_present_flag: 0 =
> 0x00000000
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: data_coding: 0 = 0x00000000
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: sm_default_msg_id: 0 =
0x00000000
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: sm_length: 38 = 0x00000026
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: short_message:
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: Octet string at 0xade13e48:
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: len: 38
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: size: 39
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: immutable: 0
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: data: 4d 65 72 61 20 65
69 6b 61
> 20 65 6c 69 73 61 20 Mera eika elisa
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: data: 67 6f 6e 7a 61 6c
65 7a 20
> 62 61 72 61 6a 61 73 gonzalez barajas
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: data: 20 63 6f 6d 70 75
> compu
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: Octet string dump ends.
>
> 2010-02-26 13:46:48 [9936] [13] DEBUG: SMPP PDU dump ends.
>
>
>
> Regards,
>
> Marcelo
>
> On Mar 1, 2010, at 12:49 PM, Jakob Thomsen wrote:
>
>
>
> Hi all,
>
>
>
> Now I have starred at my Kannel configuration file for hours and I
still
> can't figure out, why text messages longer than 160 characters are
not
> concatenated by kannel and then sent to my web application. It sends
of the
> text message in bits of 160 characters.
>
> I guess it is a misconfiguration, so I hope someone out there can
spot the
> problem.
>
> My configuration file looks like this
>
>
>
> group = core
>
> admin-port = 13000
>
> smsbox-port = 13005
>
> admin-password = bar
>
> log-file = "/var/log/kannel/bearerbox.log"
>
> log-level = 0
>
> box-deny-ip = "*.*.*.*"
>
> box-allow-ip = "127.0.0.1"
>
> access-log = "/var/log/kannel/access.log"
>
> sms-combine-concatenated-mo = true
>
> sms-combine-concatenated-mo-timeout = "1800"
>
> dlr-storage = internal
>
> sms-resend-retry = 10
>
> sms-resend-freq = 2
>
>
>
> group = smsc
>
> smsc = at
>
> modemtype = siemensmc35i
>
> device = /dev/ttyS0
>
> speed = 19200
>
> pin = 2412
>
>
>
> group = modems
>
> id = siemensmc35i
>
> name = siemensmc35i
>
> detect-string = "Siemens MC35i"
>
> init-string = "AT+CNMI=3,2,0,1,1"
>
> enable-hwhs="AT\Q3"
>
>
>
> group = smsbox
>
> bearerbox-host = 127.0.0.1
>
> global-sender = 0
>
> mo-recode = true
>
> sendsms-port = 13013
>
> sendsms-chars = "0123456789 +-"
>
> log-file = "/var/log/kannel/smsbox.log"
>
> access-log = "/var/log/kannel/smsboxAccess.log"
>
>
>
> group = sendsms-user
>
> username = tester
>
> password = foobar
>
> concatenation = true
>
> max-messages= 10
>
>
>
> group = sms-service
>
> name = receiveMessages
>
> keyword = default
>
> max-messages = 0
>
> concatenation = true
>
> get-url = http://localhost:8080/receiveSMS?sender=%p&text=%a
>
>
>
> The output from status is:
>
> Kannel bearerbox version `1.4.3'.
>
> Build `Mar 1 2010 16:43:22', compiler `4.3.2'.
>
> System Linux, release 2.6.27-16-generic, version #1 SMP Tue Dec 1
17:56:54
> UTC 2 009, machine
i686.
>
> Hostname largo, IP 127.0.1.1.
>
> Libxml version 2.6.32.
>
> Using native malloc.
>
>
>
> Status: running, uptime 0d 0h 7m 46s
>
> WDP: received 0 (0 queued), sent 0 (0 queued)
>
> SMS: received 2 (0 queued), sent 0 (0 queued), store size -1
>
> SMS: inbound (0.03,0.01,0.00) msg/sec, outbound (0.00,0.00,0.00)
msg/sec
>
> DLR: 0 queued, using internal storage
>
> Box connections:
>
> smsbox:(none), IP 127.0.0.1 (0 queued), (on-line 0d 0h 7m 32s)
>
> SMSC connections:
>
> unknown AT2[/dev/ttyS0] (online 464s, rcvd 2, sent 0, failed
0,
> queued 0 msgs)
>
>
>
> Best regards
>
>
>
> Jakob G. Thomsen
>
>
>
>
>
>
