I don´t know your modem, but in the cases I know, port 23 is for
managing the modem configs and such.
For using AT interface they usually use a different port. with the
same Telnet protocol... something like Telnet host:2100
Regards
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Tue, Feb 16, 2010 at 1:06 PM, info.ubichip <[email protected]> wrote:
> Hello,
>
> Does someone got similar issue ?
>
> Regards
>
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On Behalf
> Of info.ubichip
> Sent: lundi 15 février 2010 13:49
> To: [email protected]
> Subject: Using Portech modem
>
> Hello All,
>
> I would like to use a portech GSM gateway MV-370 on a kannel 1.4.3 version,
> I'm able to send basic sms by hand using telnet as the following example :
>
> Telnet 192.168.1.121
>
> username:voip
> password:****
> User level = admin
>
> Command : logout,module,module1,module2
>>module
> Getting module 1..
> Got!! Press 'ctrl-x' to release module 1.
>
> at+cmgf=1
> OK
> At+cmgs="1122334455"
>>test
> +CMGS:30
>
>
> So I make a configuration in kannel as follow :
> group = smsc
> smsc = at
> smsc-id = portech
> allowed-smsc-id = portech
> log-level = 0
> log-file = "/var/log/kannel/portech.log"
> device = telnet
> host = 192.168.1.121
> port = 23
> login-prompt = "username:"
> password-prompt = "password:"
> smsc-username = "voip"
> smsc-password = "1234"
> modemtype = portech
> validityperiod = 172
> keepalive = 10
> my-number = 0012345678
> sim-buffering = true
>
>
> I got the following error, it is like the telnet session is not initialized
> correctly :
>
> 2010-02-15 13:43:50 [32013] [8] INFO: AT2[portech]: trying to use speed
> <115200> from modem definition
> 2010-02-15 13:43:50 [32013] [8] INFO: AT2[portech]: opening device
> 2010-02-15 13:43:50 [32013] [8] DEBUG: Connecting to <192.168.1.121>
> 2010-02-15 13:43:50 [32013] [8] DEBUG: AT2[portech]: device opened. Telnet
> mode = 1
> 2010-02-15 13:43:50 [32013] [8] DEBUG: AT2[portech]: --> ^M
> 2010-02-15 13:43:52 [32013] [8] DEBUG: AT2[portech]: --> AT^M
> 2010-02-15 13:43:57 [32013] [8] DEBUG: AT2[portech]: <-- username: AT
> 2010-02-15 13:44:03 [32013] [8] DEBUG: AT2[portech]: --> AT^M
> 2010-02-15 13:44:08 [32013] [8] DEBUG: AT2[portech]: <-- password: **
> 2010-02-15 13:44:08 [32013] [8] DEBUG: AT2[portech]: <-- bad username or
> password!!!
> 2010-02-15 13:44:08 [32013] [8] DEBUG: AT2[portech]: <-- exit...
> 2010-02-15 13:44:12 [32013] [8] DEBUG: AT2[portech]: --> AT^M
> 2010-02-15 13:44:21 [32013] [8] INFO: AT2[portech]: Closing device
> 2010-02-15 13:44:21 [32013] [8] INFO: AT2[portech]: speed in modem
> definition don't work, will autodetect
>
>
> Does someone got similar issue with this type of modem ?
>
> My second question is : as you could see after the telnet connection, I have
> to specify the command 'module' to get full access to the AT command of the
> modem, does there is a way to put it in the init-string in the modem
> definition ? If yes how to send a carriage return in the init-string
> parameter (I have already some AT+CNMI....' command to process.
>
>
> Thanks in advance for your help
>
>
>
>
>
>
>
