That's fine. What you see in logs (addr_ton) is different from what you have 
configured (source-addr-ton). You should worry about source-addr-ton only in 
submit_sm pdus, not bind_receiver.

BR,
Nikos
  ----- Original Message ----- 
  From: Sandesh Waman // Viva 
  To: Kannel Users 
  Sent: Friday, February 05, 2010 2:10 PM
  Subject: Not getting gateway specified.



  Dear All,

  I am using kannel and I am uanble to get gateway specified as display name 
when i send sms.

  Is there any parameter to set so that I will get it.

  Also i have set some parameter as per the provide but not getting this 
parameter in PDU logs.

  SMSC group

  group = smsc
  smsc = smpp
  smsc-id = abc
  host=xx.xx.xx.xx
  smsc-username=abc
  smsc-password=*****
  port = 1234
  receive-port= 0
  connect-allow-ip = *.*.*.*
  system-type=""
  address-range=""
  alt-dcs= 0
  source-addr-ton=9
  source-addr-npi=5 
  dest-addr-ton=1
  dest-addr-npi=1
  msg-id-type=0x00
  allowed-smsc-id=abc
  #transceiver-mode=1
  throughput=10


  Following logs not getting specified Parameter value of add_ton add_npi

  SMPP[swift_ezee]: Sending PDU:
  2010-02-05 17:36:36 [1247] [7] DEBUG: SMPP PDU 0xa16e8c8 dump:
  2010-02-05 17:36:36 [1247] [7] DEBUG:   type_name: bind_receiver
  2010-02-05 17:36:36 [1247] [7] DEBUG:   command_id: 1 = 0x00000001
  2010-02-05 17:36:36 [1247] [7] DEBUG:   command_status: 0 = 0x00000000
  2010-02-05 17:36:36 [1247] [7] DEBUG:   sequence_number: 1 = 0x00000001
  2010-02-05 17:36:36 [1247] [7] DEBUG:   system_id: "xxx"
  2010-02-05 17:36:36 [1247] [7] DEBUG:   password: "xxx"
  2010-02-05 17:36:36 [1247] [7] DEBUG:   system_type: ""
  2010-02-05 17:36:36 [1247] [7] DEBUG:   interface_version: 52 = 0x00000034
  2010-02-05 17:36:36 [1247] [7] DEBUG:   addr_ton: 0 = 0x00000000
  2010-02-05 17:36:36 [1247] [7] DEBUG:   addr_npi: 0 = 0x00000000
  2010-02-05 17:36:36 [1247] [7] DEBUG:   address_range: ""
  2010-02-05 17:36:36 [1247] [7] DEBUG: SMPP PDU dump ends.
  2010-02-05 17:36:36 [1247] [6] DEBUG: SMPP[swift_ezee]: Sending PDU:
  2010-02-05 17:36:36 [1247] [6] DEBUG: SMPP PDU 0xa17ede0 dump:
  2010-02-05 17:36:36 [1247] [6] DEBUG:   type_name: bind_transmitter
  2010-02-05 17:36:36 [1247] [6] DEBUG:   command_id: 2 = 0x00000002
  2010-02-05 17:36:36 [1247] [6] DEBUG:   command_status: 0 = 0x00000000
  2010-02-05 17:36:36 [1247] [6] DEBUG:   sequence_number: 1 = 0x00000001
  2010-02-05 17:36:36 [1247] [6] DEBUG:   system_id: "xxx"
  2010-02-05 17:36:36 [1247] [6] DEBUG:   password: "xxx"
  2010-02-05 17:36:36 [1247] [6] DEBUG:   system_type: ""
  2010-02-05 17:36:36 [1247] [6] DEBUG:   interface_version: 52 = 0x00000034
  2010-02-05 17:36:36 [1247] [6] DEBUG:   addr_ton: 0 = 0x00000000
  2010-02-05 17:36:36 [1247] [6] DEBUG:   addr_npi: 0 = 0x00000000
  2010-02-05 17:36:36 [1247] [6] DEBUG:   address_range: ""
  2010-02-05 17:36:36 [1247] [6] DEBUG: SMPP PDU dump ends.
  2010-02-05 17:36:36 [1247] [6] DEBUG: SMPP[xxx]: Got PDU:
  2010-02-05 17:36:36 [1247] [6] DEBUG: SMPP PDU 0xa17ede0 dump:
  2010-02-05 17:36:36 [1247] [6] DEBUG:   type_name: bind_transmitter_resp
  2010-02-05 17:36:36 [1247] [6] DEBUG:   command_id: 2147483650 = 0x80000002
  -- 
  Regards,

  Sandesh

Reply via email to