It works on terminal emulator. I tried following commands using PuTTY: ATQ0V1E0 (Response: Ok) AT+GMM (Response: Nokia E51)
I am using Windows Vista. Thanks, On Wed, Jul 22, 2009 at 6:49 PM, Stipe Tolj<[email protected]> wrote: > Waqar Ahmad schrieb: >> I am trying to configure Kannel on Windows Vista using Cygwin. >> Installation is successful and services are running. >> I am using Nokia E51 as GSM modem connected via USB cable. This device >> shows up in Windows Vista Device Manager as connected on COM18. How >> should I specify settings in the kannel.config so that I can use E51 >> as GSM Modem? I tried “device = COM18″ and also “device = /dev/COM18″ >> but they don’t work. Can somebody share working config files for >> Windows? >> >> I get following error: >> >> INFO: AT2[/dev/com18]: opening device >> 2009-07-21 15:36:32 [8128] [6] ERROR: AT2[/dev/com18]: open failed! ERRNO=2 >> 2009-07-21 15:36:32 [8128] [6] ERROR: System error 2: No such file or >> directory >> 2009-07-21 15:36:32 [8128] [6] ERROR: AT2[/dev/com18]: >> at2_device_thread: open_at2_device failed. >> 2009-07-21 15:36:32 [8128] [6] ERROR: System error 2: No such file or >> directory >> 2009-07-21 15:36:32 [8128] [6] ERROR: AT2[/dev/com18]: Couldn't >> connect (retrying in 10 seconds). > > can you confirm (using the Windows included terminal emulation tool) that you > really can connect to COM port 18 and can issue some AT commands with > responses? > > Seems to me that Cygwin isn't able to make the device available under the > /dev/com<N> syntax here. > > No further clues from my side. > > Stipe > > > -- > ------------------------------------------------------------------- > Kölner Landstrasse 419 > 40589 Düsseldorf, NRW, Germany > > tolj.org system architecture Kannel Software Foundation (KSF) > http://www.tolj.org/ http://www.kannel.org/ > > mailto:st_{at}_tolj.org mailto:stolj_{at}_kannel.org > ------------------------------------------------------------------- >
