My Os is debian. Thanks, it's OK !!!! :-) 2009/4/25 Nikos Balkanas <nbalka...@gmail.com>
> Yeap! Check your permissions for /dev/ttyS0. It should be -rwx for kannel > user. In some systems like Ubuntu, you need to be in group dial to use the > modem. What is your OS? > > BR, > Nikos > > ----- Original Message ----- > *From:* BeCauet <beca...@gmail.com> > *To:* users@kannel.org > *Sent:* Saturday, April 25, 2009 3:52 PM > *Subject:* Re: wavecom compatibilities ? > > Hello, > my error is : > > 2009-04-25 14:49:05 [7887] [6] INFO: AT2[/dev/ttyS0]: opening device > 2009-04-25 14:49:05 [7887] [6] ERROR: AT2[/dev/ttyS0]: open failed! > ERRNO=13 > 2009-04-25 14:49:05 [7887] [6] ERROR: System error 13: Permission denied > 2009-04-25 14:49:05 [7887] [6] ERROR: AT2[/dev/ttyS0]: at2_device_thread: > open_at2_device failed. Terminating > > > > ???? > > 2009/4/25 BeCauet <beca...@gmail.com> > >> Hello! >> Thanks for your configuration. >> >> I just connect my fastrack to Kannel. >> Kannel can not connect to the modem!!! >> >> My sim card does not have a PIN code (disabled) and if I try to call the >> phone number, the tonality works. (LED blinks) >> >> I even connected the modem to my Windows XP laptop, and I had to send AT >> commands to the modem via hyperterminal! Great! >> >> I do not understand! :-(( >> >> My config: >> >> cauet:/etc/kannel# dmesg | grep tty >> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >> 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >> cauet:/etc/kannel# >> >> >> this is what Kannel said: >> >> SMSC connections: >> Β Β Β Β *unknown*Β Β Β Β AT2[/dev/ttyS0] (connecting, rcvd 0, sent 0, >> failed 0, queued 0 msgs) >> >> or : >> >> SMSC connections: >> Β Β Β Β *unknown*Β Β Β Β AT2[/dev/ttyS1] (connecting, rcvd 0, sent 0, >> failed 0, queued 0 msgs) >> >> >> Please help :-) >> >> 2009/4/21 nikos nikolaou <de2...@gmail.com> >> >> >>> >>> On Tue, Apr 21, 2009 at 7:49 PM, BeCauet <beca...@gmail.com> wrote: >>> >>>> Hello, >>>> You use this configuration to fastrack 1206B? >>>> >>>> >>>> group = smsc >>>> smsc = at >>>> modemtype = wavecom >>>> device = /dev/ttyS1 >>>> >>>> >>>> Thanks! >>>> >>>> 2009/4/14 BeCauet <beca...@gmail.com> >>>> >>>> Ok thank you. >>>>> I have buy 2x FASTRACK M1206B :-) >>>>> >>>>> 2009/4/8 nikos nikolaou <de2...@gmail.com> >>>>> >>>>> >>>>>> >>>>>> On Wed, Apr 8, 2009 at 4:51 PM, BeCauet <beca...@gmail.com> wrote: >>>>>> >>>>>>> hello, >>>>>>> can you tell me which model is compatible with Kannel? >>>>>>> >>>>>>> Wavecom WM02DA-G900 >>>>>>> Wavecom WMOD2 - M1203A >>>>>>> Wavecom FASTRACK M1206B >>>>>>> >>>>>>> thank you >>>>>> >>>>>> >>>>>> I use Wavecom FASTRACK M1206B with kannel and works fine. >>>>>> >>>>>> -- >>>>>> Β Β Β Β Β Β /*Nikos Nikolaou*/ >>>>>> /*Upcoming Computers Engineer*/ >>>>>> >>>>> Thats my configuration file: >>> Β >>> #Core Configuration! >>> group = core >>> admin-port = 13000 >>> smsbox-port = 13001 >>> admin-password = xxxxx >>> log-file = "/tmp/log/kannel.log" >>> log-level = 0 >>> box-deny-ip = "*.*.*.*" >>> box-allow-ip = "127.0.0.1" >>> >>> #sms configuration >>> group = smsc >>> smsc = at >>> modemtype = auto >>> device=/dev/ttyS0 >>> my-number = xxxxxxxxx >>> speed = 9600 >>> connect-allow-ip = 127.0.0.1 >>> log-level = 0 >>> >>> #sms configuration out >>> group = smsbox >>> bearerbox-host = 127.0.0.1 >>> sendsms-port = 13013 >>> global-sender = xxxxx >>> mo-recode = true >>> log-level = 0 >>> >>> #sendsms configuration >>> group = sendsms-user >>> username = xxxxxx >>> password = xxxxxxxx >>> concatenation= true >>> max-messages = 10 >>> >>> #smsservice configuration >>> group = sms-service >>> keyword = >>> catch-all = yes >>> omit-empty = true >>> max-messages = 1 >>> post-url = " >>> http://localhost:8000/sendsms.php?phone=%p&text1=%k&text2=%s&text3=%s"; >>> >>> include = "/usr/local/kannel/modems.conf" >>> Β >>> I put auto in modemtype to force kannel look for the manufacturers name.I >>> suggest u put auto too. >>> My device name kannel was attached on my computer is the Serial Com port >>> and because i have only 1 com port its name is ttyS0 if u put ttyS1 that >>> means you connected it on the 2nd serial com port. :) >>> If u have only 1 com port then write: ttyS0. >>> I set the speed to 9600. >>> Before i set it to 9600 i had it set to auto so that kannel try all >>> speeds and find the working one and then set it up automatically.Although >>> that was working i realized that was taking too long for my opinion to find >>> the best speed so i saw on my log file that it set the speed to 9600 and >>> then i set it up in my configuration file so it wont have to find the best >>> speed and buy me some more time. :) >>> In sms-box you wont need the mo-recode feature because i wanted kannel to >>> accept greek sms and i have to put it there and try to send the sms to my >>> php script unchanged. >>> Although if u set it up it wont make a difference. >>> The omit-empty feature tells kannel that if an empty message was sent >>> from the localhost to the sms-box to send it don't send it and just discard >>> it! >>> You must include the last line:Β Β include = >>> "/usr/local/kannel/modems.conf" >>> Β so that kannel finds your modem. >>> In the username and password features you put whatever you want. >>> In the global-sender and in the my-number features you put ur sim card >>> number. >>> Study my configuration file and if you have any questions read the >>> documentation for the specific feature and if u still have questions i'm >>> here to explain it to you... >>> >>> The rest is on ur screen screen. :) Try it, study it and i hope you will >>> set it up and running in no time.. >>> >>> Regards >>> >>> >>> -- >>> Β Β Β Β Β Β /*Nikos Nikolaou*/ >>> /*Upcoming Computers Engineer*/ >>> >> >> >
