I updated it also, and I don't get any bearerbox panics. Of course I don't have 20 SMScs as you do :-)
No changes in the CVS, though, since the 10/1/2009 release.

BR,
Nikos
----- Original Message ----- From: "Nikos Balkanas" <[email protected]>
To: "Alvaro Cornejo" <[email protected]>; <[email protected]>
Sent: Tuesday, January 13, 2009 5:54 AM
Subject: Re: Bearbox panic with cvs-20090113


The latest CVS propably means 1.4.2 release. I guess some growing pains.

You haven't updated from CVS propably for a long time. This message exists for at least 3 months. It simply says that if you have any reroute rules between your SMSCs, DLRs won't obey them. The parameter that controls it is 'reroute-dlr' <Boolean> at group = smsc.

BR,
Nikos
----- Original Message ----- From: "Alvaro Cornejo" <[email protected]>
To: <[email protected]>
Sent: Tuesday, January 13, 2009 5:09 AM
Subject: Bearbox panic with cvs-20090113


Hi All

I just install latest CCVS and bearerbox panics. Here is the log.

BTW what does "DLR rerouting for smsc id <xxx> disabled" means?

For simplicity, In the config file attached I didn show all the
SMSC_AT entries since all are the same. So the log shows several
entries for AT smsc that are not shown on config files



2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/bearerbox.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: Started access logfile
`/var/log/kannel/beareraccess.log'.
2009-01-12 20:52:08 [23586] [0] INFO: HTTP: Opening server at port 13000.
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller)
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 2
(gwlib/http.c:server_thread)
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 3
(gw/bb_http.c:httpadmin_run)
2009-01-12 20:52:08 [23586] [0] DEBUG: starting smsbox connection module
2009-01-12 20:52:08 [23586] [0] INFO: BOXC: 'smsbox-max-pending' not
set, using default (100).
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 4
(gw/bb_boxc.c:sms_to_smsboxes)
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 5
(gw/bb_boxc.c:smsboxc_run)
2009-01-12 20:52:08 [23586] [0] INFO: Set SMS resend frequency to 60 seconds.
2009-01-12 20:52:08 [23586] [0] INFO: SMS resend retry set to unlimited.
2009-01-12 20:52:08 [23586] [0] DEBUG: smsbox MO concatenated message
handling enabled
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id
<Tel_sc3783> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/Tel_sc3783.log' with level `0'.
2009-01-12 20:52:08 [23586] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
maps to pid 23586.
2009-01-12 20:52:08 [23586] [2] DEBUG: Thread 2
(gwlib/http.c:server_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [3] DEBUG: Thread 3
(gw/bb_http.c:httpadmin_run) maps to pid 23586.
2009-01-12 20:52:08 [23586] [4] DEBUG: Thread 4
(gw/bb_boxc.c:sms_to_smsboxes) maps to pid 23586.
2009-01-12 20:52:08 [23586] [5] DEBUG: Thread 5
(gw/bb_boxc.c:smsboxc_run) maps to pid 23586.
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 6
(gw/smsc/smsc_smpp.c:io_thread)
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id <Tel1> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/com1_Tel1.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[Tel1]: configuration doesn't
show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 7
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [7] DEBUG: Thread 7
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [7] INFO: Logging thread `7' to logfile
`/var/log/kannel/com1_Tel1.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id <Tel2> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/x1p1_Tel2.log' with level `0'.
2009-01-12 20:52:08 [23586] [6] DEBUG: Thread 6
(gw/smsc/smsc_smpp.c:io_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [6] INFO: Logging thread `6' to logfile
`/var/log/kannel/Tel_sc3783.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[Tel2]: configuration doesn't
show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 8
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id <Tel3> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/x1p2_Tel3.log' with level `0'.
2009-01-12 20:52:08 [23586] [8] DEBUG: Thread 8
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [8] INFO: Logging thread `8' to logfile
`/var/log/kannel/x1p1_Tel2.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[Tel3]: configuration doesn't
show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 9
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id <Tel4> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/x1p3_Tel4.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[Tel4]: configuration doesn't
show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 10
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [10] DEBUG: Thread 10
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [10] INFO: Logging thread `10' to logfile
`/var/log/kannel/x1p3_Tel4.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id <Tel5> disabled.
2009-01-12 20:52:08 [23586] [9] DEBUG: Thread 9
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [9] INFO: Logging thread `9' to logfile
`/var/log/kannel/x1p2_Tel3.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/x1p4_Tel5.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[Tel5]: configuration doesn't
show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 11
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id <Tel6> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/x1p5_Tel6.log' with level `0'.
2009-01-12 20:52:08 [23586] [11] DEBUG: Thread 11
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [11] INFO: Logging thread `11' to logfile
`/var/log/kannel/x1p4_Tel5.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[Tel6]: configuration doesn't
show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 12
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id
<momx1> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/x1p6_momx1.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[momx1]: configuration
doesn't show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 13
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [13] DEBUG: Thread 13
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [13] INFO: Logging thread `13' to logfile
`/var/log/kannel/x1p6_momx1.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id
<momx2> disabled.
2009-01-12 20:52:08 [23586] [12] DEBUG: Thread 12
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/x1p7_momx2.log' with level `0'.
2009-01-12 20:52:08 [23586] [12] INFO: Logging thread `12' to logfile
`/var/log/kannel/x1p5_Tel6.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[momx2]: configuration
doesn't show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 14
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id <Tel7> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/x2p1_Tel7.log' with level `0'.
2009-01-12 20:52:08 [23586] [14] DEBUG: Thread 14
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [14] INFO: Logging thread `14' to logfile
`/var/log/kannel/x1p7_momx2.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[Tel7]: configuration doesn't
show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 15
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id <Tel9> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/x2p3_Tel9.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[Tel9]: configuration doesn't
show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 16
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [16] DEBUG: Thread 16
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [16] INFO: Logging thread `16' to logfile
`/var/log/kannel/x2p3_Tel9.log' with level `0'.
2009-01-12 20:52:08 [23586] [15] DEBUG: Thread 15
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [15] INFO: Logging thread `15' to logfile
`/var/log/kannel/x2p1_Tel7.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id
<Tel10> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/x2p4_Tel10.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[Tel10]: configuration
doesn't show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 17
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id
<momx3> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/x2p5_momx3.log' with level `0'.
2009-01-12 20:52:08 [23586] [17] DEBUG: Thread 17
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [17] INFO: Logging thread `17' to logfile
`/var/log/kannel/x2p4_Tel10.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[momx3]: configuration
doesn't show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 18
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id
<momx4> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/x2p6_momx4.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: AT2[momx4]: configuration
doesn't show modemtype. will autodetect
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 19
(gw/smsc/smsc_at.c:at2_device_thread)
2009-01-12 20:52:08 [23586] [19] DEBUG: Thread 19
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [19] INFO: Logging thread `19' to logfile
`/var/log/kannel/x2p6_momx4.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id
<click> disabled.
2009-01-12 20:52:08 [23586] [18] DEBUG: Thread 18
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 23586.
2009-01-12 20:52:08 [23586] [18] INFO: Logging thread `18' to logfile
`/var/log/kannel/x2p5_momx3.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/click1.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: HTTP: Opening server at port 13014.
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 20
(gw/smsc/smsc_http.c:httpsmsc_receiver)
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 21
(gw/smsc/smsc_http.c:httpsmsc_send_cb)
2009-01-12 20:52:08 [23586] [0] INFO: HTTP[click]: Initiated and ready
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id
<nxtlmail1> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/ntel1.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] WARNING: Both 'allowed-smsc-id' and
'denied-smsc-id' set, deny-list automatically ignored
2009-01-12 20:52:08 [23586] [21] DEBUG: Thread 21
(gw/smsc/smsc_http.c:httpsmsc_send_cb) maps to pid 23586.
2009-01-12 20:52:08 [23586] [21] INFO: Logging thread `21' to logfile
`/var/log/kannel/click1.log' with level `0'.
2009-01-12 20:52:08 [23586] [20] DEBUG: Thread 20
(gw/smsc/smsc_http.c:httpsmsc_receiver) maps to pid 23586.
2009-01-12 20:52:08 [23586] [20] INFO: Logging thread `20' to logfile
`/var/log/kannel/click1.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: HTTP: Opening server at port 13016.
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 22
(gw/smsc/smsc_http.c:httpsmsc_receiver)
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 23
(gw/smsc/smsc_http.c:httpsmsc_send_cb)
2009-01-12 20:52:08 [23586] [0] INFO: HTTP[nxtlmail1]: Initiated and ready
2009-01-12 20:52:08 [23586] [0] INFO: DLR rerouting for smsc id
<nxtlmail2> disabled.
2009-01-12 20:52:08 [23586] [0] INFO: Added logfile
`/var/log/kannel/ntel2.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] WARNING: Both 'allowed-smsc-id' and
'denied-smsc-id' set, deny-list automatically ignored
2009-01-12 20:52:08 [23586] [23] DEBUG: Thread 23
(gw/smsc/smsc_http.c:httpsmsc_send_cb) maps to pid 23586.
2009-01-12 20:52:08 [23586] [23] INFO: Logging thread `23' to logfile
`/var/log/kannel/ntel1.log' with level `0'.
2009-01-12 20:52:08 [23586] [0] INFO: HTTP: Opening server at port 13017.
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 24
(gw/smsc/smsc_http.c:httpsmsc_receiver)
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 25
(gw/smsc/smsc_http.c:httpsmsc_send_cb)
2009-01-12 20:52:08 [23586] [0] INFO: HTTP[nxtlmail2]: Initiated and ready
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 26
(gw/bb_smscconn.c:sms_router)
2009-01-12 20:52:08 [23586] [0] DEBUG: starting wapbox connection module
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 27
(gw/bb_boxc.c:wdp_to_wapboxes)
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 28
(gw/bb_boxc.c:wapboxc_run)
2009-01-12 20:52:08 [23586] [0] DEBUG: starting WDP router
2009-01-12 20:52:08 [23586] [0] DEBUG: Started thread 29
(gw/bearerbox.c:wdp_router)
2009-01-12 20:52:08 [23586] [0] INFO: ----------------------------------------
2009-01-12 20:52:08 [23586] [0] INFO: Kannel bearerbox II version
cvs-20090113 starting
2009-01-12 20:52:08 [23586] [0] INFO: MAIN: Start-up done, entering mainloop
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[Tel1]: start called
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[Tel2]: start called
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[Tel3]: start called
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[Tel4]: start called
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[Tel5]: start called
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[Tel6]: start called
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[momx1]: start called
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[momx2]: start called
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[Tel7]: start called
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[Tel9]: start called
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[Tel10]: start called
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[momx3]: start called
2009-01-12 20:52:08 [23586] [0] DEBUG: AT2[momx4]: start called
2009-01-12 20:52:08 [23586] [22] DEBUG: Thread 22
(gw/smsc/smsc_http.c:httpsmsc_receiver) maps to pid 23586.
2009-01-12 20:52:08 [23586] [22] INFO: Logging thread `22' to logfile
`/var/log/kannel/ntel1.log' with level `0'.
2009-01-12 20:52:08 [23586] [24] DEBUG: Thread 24
(gw/smsc/smsc_http.c:httpsmsc_receiver) maps to pid 23586.
2009-01-12 20:52:08 [23586] [24] INFO: Logging thread `24' to logfile
`/var/log/kannel/ntel2.log' with level `0'.
2009-01-12 20:52:08 [23586] [25] DEBUG: Thread 25
(gw/smsc/smsc_http.c:httpsmsc_send_cb) maps to pid 23586.
2009-01-12 20:52:08 [23586] [25] INFO: Logging thread `25' to logfile
`/var/log/kannel/ntel2.log' with level `0'.
2009-01-12 20:52:08 [23586] [26] DEBUG: Thread 26
(gw/bb_smscconn.c:sms_router) maps to pid 23586.
2009-01-12 20:52:08 [23586] [27] DEBUG: Thread 27
(gw/bb_boxc.c:wdp_to_wapboxes) maps to pid 23586.
2009-01-12 20:52:08 [23586] [27] DEBUG: wdp_to_wapboxes: destroying lists
2009-01-12 20:52:08 [23586] [27] DEBUG: Thread 27
(gw/bb_boxc.c:wdp_to_wapboxes) terminates.
2009-01-12 20:52:08 [23586] [29] DEBUG: Thread 29
(gw/bearerbox.c:wdp_router) maps to pid 23586.
2009-01-12 20:52:08 [23586] [28] DEBUG: Thread 28
(gw/bb_boxc.c:wapboxc_run) maps to pid 23586.
2009-01-12 20:52:08 [23586] [6] PANIC: octstr_format format string syntax error.
2009-01-12 20:52:08 [23586] [6] PANIC:
/usr/local/sbin/bearerbox(gw_panic+0xc2) [0x80ce3a2]
2009-01-12 20:52:08 [23586] [6] PANIC:
/usr/local/sbin/bearerbox(octstr_format_valist_real+0x1a8) [0x80d2518]
2009-01-12 20:52:08 [23586] [6] PANIC:
/usr/local/sbin/bearerbox(octstr_format+0x1b) [0x80d2e5b]
2009-01-12 20:52:08 [23586] [6] PANIC: /usr/local/sbin/bearerbox [0x808844c] 2009-01-12 20:52:08 [23586] [6] PANIC: /usr/local/sbin/bearerbox [0x8089420] 2009-01-12 20:52:08 [23586] [6] PANIC: /usr/local/sbin/bearerbox [0x808ad59] 2009-01-12 20:52:08 [23586] [6] PANIC: /usr/local/sbin/bearerbox [0x80c4c31]
2009-01-12 20:52:08 [23586] [6] PANIC: /lib/libpthread.so.0 [0x4c83db]
2009-01-12 20:52:08 [23586] [6] PANIC: /lib/libc.so.6(clone+0x5e) [0x5a726e]
[r...@srvcom1 kannel]#


#CORE BEARERBOX
group = core
admin-port = 13000
smsbox-port = 13001
wapbox-port = 13002
dlr-storage = mysql
# usar en vez del MYSQL-DLR
# dlr-storage = internal
admin-password =
status-password =
#box-allow-ip = "*.*.*.*"
box-allow-ip = "127.0.0.1;10.10.5.2"
box-deny-ip = "*.*.*.*"
log-file = "/var/log/kannel/bearerbox.log"
log-level = 0
access-log = "/var/log/kannel/beareraccess.log"


# SMSBOX SETUP
#
group = smsbox
bearerbox-host = 10.10.5.2
sendsms-chars = "0123456789 +"
sendsms-port = 13013
global-sender = SmsGlobal
log-file = "/var/log/kannel/smsbox.log"
log-level = 0
access-log = "/var/log/kannel/smsaccess.log"
http-request-retry = 10
http-queue-delay = 60
# mo-recode = yes
# LOG LEVEL 0 = DEBUG, 4 = INFO
#



group = smsc
smsc = smpp
smsc-id = te1
host =
port = 8808
transceiver-mode        = true
smsc-username           = c
smsc-password           = v
##throughput              = 10
msg-id-type             = 1
system-type             = smpp
dest-addr-ton           = 2
dest-addr-npi           = 1
source-addr-ton         = 2
source-addr-npi         = 1
##denied-smsc-id          = click
log-level               = 0
log-file                = "/var/log/kannel/telcel_sc3783.log"
allowed-smsc-id         = te1

group = smsc
smsc = at
smsc-id = tel2
log-level = 0
log-file = "/var/log/kannel/com1_tel2.log"
modemtype = auto
device = /dev/ttyS0
speed = 115200
allowed-smsc-id = tel2
sim-buffering = true
keepalive = 60
max-error-count = 8




Reply via email to