Hi,
Probably, you should try source TON/NPI to 5, 0 because TON 5 is for alphanumeric and might have configured the same at operator end. Thanks, >> Divyesh A. ________________________________ From: Δημήτρης Ευμορφόπουλος [mailto:[EMAIL PROTECTED] Sent: Saturday, November 18, 2006 12:10 PM To: [email protected] Subject: Changing source-tos and npi does nothing Dear all, I have a small problem connecting a kannel box to a halys SMSC. M y provider receives the source address of the messages I send with a + sign in front. Those messages have a 4 digit short number address say 1040 and they are not international numbers so they cannot have a + sign. I have tried everything from TOS 0 and 1 to even npi 0 to 6 ... the fact is that no matter what I put I the tos and npi values it is simply ignored. Can anyone help? Here is the SMSC config group = smsc smsc = smpp smsc-id = MyIDString host = OPERATOR-IP-ADDRESS port = 2775 throughput = 2 keepalive = 60 connection-timeout = 0 allowed-smsc-id = MyIDString transceiver-mode = true smsc-username = "TheSystemID" smsc-password = "ThePassword" system-type = "ESME" source-addr-ton = 0 source-addr-npi = 1 dest-addr-ton = 1 dest-addr-npi = 1 Destination addresses must be in international format so TOS and NPI must be set to 1 and 1 respectively ... Source address must be in "don't care" or "national" format so the last thing I tried was TOS 0 and npi 1 ... My operator suggested TOS 0 and npi 6 and yet no change ... Help
