Re: Modem configuration help !

[Leonard]

Hi,   FC5 should use CDC-ACM for the modem, check /var/log/messages and see if it is picking up the modem and which driver its loading.   Also, it should set the device as ttyACM0 ( or 1, 2, 3)   (check you logs file!) If so, then use this in your kannel config (/dev/ttyACM0) ----- Original Message ----- From: Vaibhav Solanki To: users@kannel.org Sent: Monday, August 21, 2006 11:24 AM Subject: Modem configuration help ! Hello,   My environment is:   FC5 with Kannle 1.4.0 and GSM Modem as Falcom Samba 55(USB). I am able to detect Modem on the OS. Getting output in dmesg and /proc/bus/usb/devices.   But when i configure the same in Kannel am getting "Opening failed. Terminating" error as follows:   2006-08-21 14:21:26 [2438] [0] INFO: Added logfile `/tmp/kannel.log' with level `1'. 2006-08-21 14:21:26 [2438] [0] INFO: Started access logfile `/tmp/access.log'. 2006-08-21 14:21:26 [2438] [0] INFO: HTTP: Opening server at port 13000. 2006-08-21 14:21:26 [2438] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2006-08-21 14:21:26 [2438] [0] INFO: DLR rerouting for smsc id <FAKE> disabled. 2006-08-21 14:21:26 [2438] [0] INFO: DLR rerouting for smsc id <(null)> disabled. 2006-08-21 14:21:26 [2438] [0] INFO: AT2[/dev/ttyUSB0]: configuration shows modemtype <falcom> 2006-08-21 14:21:26 [2438] [0] INFO: AT2[/dev/ttyUSB0]: read modem definition for <Falcom> 2006-08-21 14:21:26 [2438] [0] INFO: ---------------------------------------- 2006-08-21 14:21:26 [2438] [0] INFO: Kannel bearerbox II version 1.4.0 starting 2006-08-21 14:21:26 [2438] [0] INFO: Loading store file `/tmp/kannel.store' 2006-08-21 14:21:26 [2438] [0] INFO: Store-file size 0, starting to unpack 2006-08-21 14:21:26 [2438] [0] INFO: Retrieved 0 messages, non-acknowledged messages: 0 2006-08-21 14:21:26 [2438] [0] INFO: MAIN: Start-up done, entering mainloop 2006-08-21 14:21:26 [2438] [8] INFO: AT2[/dev/ttyUSB0]: opening device 2006-08-21 14:21:26 [2438] [10] INFO: Client connected from <127.0.0.1> 2006-08-21 14:21:26 [2438] [8] INFO: AT2[/dev/ttyUSB0]: init device 2006-08-21 14:21:26 [2438] [8] INFO: AT2[/dev/ttyUSB0]: speed set to 9600 2006-08-21 14:21:30 [2438] [8] ERROR: AT2[/dev/ttyUSB0]: Opening failed. Terminating 2006-08-21 14:21:30 [2438] [8] INFO: AT2[/dev/ttyUSB0]: closing device 2006-08-21 14:21:30 [2438] [8] INFO: AT2[/dev/ttyUSB0]: opening device 2006-08-21 14:21:30 [2438] [8] INFO: AT2[/dev/ttyUSB0]: init device 2006-08-21 14:21:30 [2438] [8] INFO: AT2[/dev/ttyUSB0]: speed set to 9600 2006-08-21 14:21:34 [2438] [8] ERROR: AT2[/dev/ttyUSB0]: Opening failed. Terminating 2006-08-21 14:21:34 [2438] [8] INFO: AT2[/dev/ttyUSB0]: closing device 2006-08-21 14:21:34 [2438] [8] INFO: AT2[/dev/ttyUSB0]: opening device 2006-08-21 14:21:34 [2438] [8] INFO: AT2[/dev/ttyUSB0]: init device 2006-08-21 14:21:34 [2438] [8] INFO: AT2[/dev/ttyUSB0]: speed set to 9600   My settings are: #SMSC modem gsm group = smsc smsc = at host = localhost port = 13013 modemtype = falcom device = /dev/ttyUSB0 speed = 9600   group = modems id = falcom name = "Falcom" detect-string = "Falcom" no-smsc = true     Please help me with the same. Thanks Vaibhav