1. Yes, the wapbox-port should be the same on every machine. 2. The wapboxes connect to the bearerbox. Not the other way around. So only the wapboxes need to know the ip of the bearerbox. The bearerbox will accept connections from the wapboxes.
Having said that, if you are using box-deny-ip = ... and/or box-allow-ip = .... Then this is the place to put the ip's of the wapboxes. The above configuration directives go in kannel.conf (group = core) on the bearerbox host. Rene Kluwen Chimit -----Original Message----- From: OLOTU Olayinka [mailto:[EMAIL PROTECTED] Sent: donderdag 23 maart 2006 22:22 To: Rene Kluwen Cc: [email protected] Subject: RE: Kannel with 4 wapboxes - advice needed OK...so the wapbox port must be the same on every box? also am not yet clear on how to install on separate machines. i assume the bearerbox of the main kannel would have an entry for the IP of each wapbox that is on a separate machine.... thanks... --- Rene Kluwen <[EMAIL PROTECTED]> wrote: > The wapbox port is inherited from the group = core section. > > So on every box, you should have a kannel.conf like: > > group = core > wapbox-port = XXXX > ...etc. > > group = wapbox > bearerbox-host = ip-of-bearerbox-host > > Rene Kluwen > Chimit > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of OLOTU Olayinka > Sent: donderdag 23 maart 2006 15:35 > To: [email protected] > Subject: Kannel with 4 wapboxes - advice needed > > > Goodday, > > i have a nice WAP Gateway v1.4.0, no ssl support, running on a server > running RedHat > Linux AS. > > i want to use more than one wap box, preferably on different mackines; and > there i > have hit a snag. read though i have, i am yet to fully understand how to do > it. tis is > because there seems to be no variable in the wapbox section that references > the port of > the bearerbox it should use - and the wapbox port is the only parameter that > is defined > in the bearerbox section! > > i also dont know how to install only a wapbox on a system. i guess i have to > install > all and only start the wapbox? > > Please can you assist on this - or refer me to any online reference? i have > read the > kannel user guide.. > > my final aim is to have a bearerbox on a machine, and four different > wapboxes - teo on > the same machine as the bearer box and two on other machines. ten i want to > benchmark > its traffic performance.. i work in a mobile network that gets about 5 > million WAP hits > daily... should be interesting... > > thanks > > Bayo > > > > > > ___________________________________________________________ > Win a BlackBerry device from O2 with Yahoo!. Enter now. > http://www.yahoo.co.uk/blackberry > > > > ___________________________________________________________ NEW Yahoo! Cars - sell your car and browse thousands of new and used cars online! http://uk.cars.yahoo.com/
