Could be, but since we have a limite amount of input keys (~30), windowing
generates new keys but old ones are never touched again since the data per
key is in order, I assume it shouldn't be a big deal for it to handle 30
keys
I'll have a look at cache metrics and see if something pops out
Thanks
--
Alessandro Tagliapietra
On Sat, Dec 7, 2019 at 10:02 AM John Roesler <vvcep...@apache.org> wrote:
> Hmm, that’s a good question. Now that we’re talking about caching, I
> wonder if the cache was just too small. It’s not very big by default.
>
> On Sat, Dec 7, 2019, at 11:16, Alessandro Tagliapietra wrote:
> > Ok I'll check on that!
> >
> > Now I can see that with caching we went from 3-4MB/s to 400KB/s, that
> will
> > help with the bill.
> >
> > Last question, any reason why after a while the regular windowed stream
> > starts sending every update instead of caching?
> > Could it be because it doesn't have any more memory available? Any other
> > possible reason?
> >
> > Thank you so much for your help
> >
> > --
> > Alessandro Tagliapietra
> >
> >
> > On Sat, Dec 7, 2019 at 9:14 AM John Roesler <vvcep...@apache.org> wrote:
> >
> > > Ah, yes. Glad you figured it out!
> > >
> > > Caching does not reduce EOS guarantees at all. I highly recommend using
> > > it. You might even want to take a look at the caching metrics to make
> sure
> > > you have a good hit ratio.
> > >
> > > -John
> > >
> > > On Sat, Dec 7, 2019, at 10:51, Alessandro Tagliapietra wrote:
> > > > Never mind I've found out I can use `.withCachingEnabled` on the
> store
> > > > builder to achieve the same thing as the windowing example as
> > > > `Materialized.as` turns that on by default.
> > > >
> > > > Does caching in any way reduces the EOS guarantees?
> > > >
> > > > --
> > > > Alessandro Tagliapietra
> > > >
> > > >
> > > > On Sat, Dec 7, 2019 at 1:12 AM Alessandro Tagliapietra <
> > > > tagliapietra.alessan...@gmail.com> wrote:
> > > >
> > > > > Seems my journey with this isn't done just yet,
> > > > >
> > > > > This seems very complicated to me but I'll try to explain it as
> best I
> > > can.
> > > > > To better understand the streams network usage I've used prometheus
> > > with
> > > > > the JMX exporter to export kafka metrics.
> > > > > To check the amount of data we use I'm looking at the increments
> > > > > of kafka_producer_topic_metrics_byte_total and
> > > > > kafka_producer_producer_topic_metrics_record_send_total,
> > > > >
> > > > > Our current (before the change mentioned above) code looks like
> this:
> > > > >
> > > > > // This transformers just pairs a value with the previous one
> storing
> > > the
> > > > > temporary one in a store
> > > > > val pairsStream = metricStream
> > > > > .transformValues(ValueTransformerWithKeySupplier {
> PairTransformer()
> > > },
> > > > > "LastValueStore")
> > > > > .filter { _, value: MetricSequence? -> value != null }
> > > > >
> > > > > // Create a store to store suppressed windows until a new one is
> > > received
> > > > > val suppressStoreSupplier =
> > > > >
> > >
> Stores.keyValueStoreBuilder(Stores.persistentKeyValueStore("suppress-store"),
> > > > > ......
> > > > >
> > > > > // Window and aggregate data in 1 minute intervals
> > > > > val aggregatedStream = pairsStream
> > > > > .groupByKey()
> > > > > .windowedBy<TimeWindow>(TimeWindows.of(Duration.ofMinutes(1)))
> > > > > .aggregate(
> > > > > { MetricSequenceList(ArrayList()) },
> > > > > { key, value, aggregate ->
> > > > > aggregate.getRecords().add(value)
> > > > > aggregate
> > > > > },
> > > > > Materialized.`as`<String, MetricSequenceList,
> > > WindowStore<Bytes,
> > > > >
> > >
> ByteArray>>("aggregate-store").withKeySerde(Serdes.String()).withValueSerde(Settings.getValueSpecificavroSerde())
> > > > > )
> > > > > .toStream()
> > > > > .flatTransform(TransformerSupplier {
> > > > > // This transformer basically waits until a new window is
> > > received
> > > > > to emit the previous one
> > > > > }, "suppress-store")
> > > > > .map { sensorId: String, suppressedOutput: SuppressedOutput ->
> > > > > .... etc ....
> > > > >
> > > > >
> > > > > Basically:
> > > > > - all data goes through LastValueStore store that stores each
> message
> > > and
> > > > > emits a pair with the previous one
> > > > > - the aggregate-store is used to store the per-window list of
> > > messages in
> > > > > the aggregate method
> > > > > - the suppress store is used to store each received window which
> is
> > > > > emitted only after a newer one is received
> > > > >
> > > > > What I'm experiencing is that:
> > > > > - during normal execution, the streams app sends to the lastvalue
> > > store
> > > > > changelog topic 5k messages/min, the aggregate and suppress store
> > > changelog
> > > > > topics only about 100
> > > > > - at some point (after many hours of operation), the streams app
> > > starts
> > > > > sending to the aggregate and suppress store changelog topic the
> same
> > > amount
> > > > > of messages going through the lastvaluestore
> > > > > - if I restart the streams app it goes back to the initial
> behavior
> > > > >
> > > > > You can see the behavior in this graph https://imgur.com/dJcUNSf
> > > > > You can also see that after a restart everything goes back to
> normal
> > > > > levels.
> > > > > Regarding other metrics, process latency increases, poll latency
> > > > > decreases, poll rate decreases, commit rate stays the same while
> commit
> > > > > latency increases.
> > > > >
> > > > > Now, I've these questions:
> > > > > - why isn't the aggregate/suppress store changelog topic
> throughput
> > > the
> > > > > same as the LastValueStore? Shouldn't every time it aggregates
> send a
> > > > > record to the changelog?
> > > > > - is the windowing doing some internal caching like not sending
> every
> > > > > aggregation record until the window time is passed? (if so, where
> can I
> > > > > find that code since I would like to use that also for our new
> > > > > implementation)
> > > > >
> > > > > Thank you in advance
> > > > >
> > > > > --
> > > > > Alessandro Tagliapietra
> > > > >
> > > > >
> > > > > On Wed, Dec 4, 2019 at 7:57 AM John Roesler <vvcep...@apache.org>
> > > wrote:
> > > > >
> > > > >> Oh, good!
> > > > >>
> > > > >> On Tue, Dec 3, 2019, at 23:29, Alessandro Tagliapietra wrote:
> > > > >> > Testing on staging shows that a restart on exception is much
> faster
> > > and
> > > > >> the
> > > > >> > stream starts right away which I think means we're reading way
> less
> > > data
> > > > >> > than before!
> > > > >> >
> > > > >> > What I was referring to is that, in Streams, the keys for window
> > > > >> > > aggregation state is actually composed of both the window
> itself
> > > and
> > > > >> the
> > > > >> > > key. In the DSL, it looks like "Windowed<K>". That results in
> the
> > > > >> store
> > > > >> > > having a unique key per window for each K, which is why we
> need
> > > > >> retention
> > > > >> > > as well as compaction for our changelogs. But for you, if you
> just
> > > > >> make the
> > > > >> > > key "K", then compaction alone should do the trick.
> > > > >> >
> > > > >> > Yes we had compact,delete as cleanup policy but probably it
> still
> > > had a
> > > > >> too
> > > > >> > long retention value, also the rocksdb store is probably much
> > > faster now
> > > > >> > having only one key per key instead of one key per window per
> key.
> > > > >> >
> > > > >> > Thanks a lot for helping! I'm now going to setup a
> prometheus-jmx
> > > > >> > monitoring so we can keep better track of what's going on :)
> > > > >> >
> > > > >> > --
> > > > >> > Alessandro Tagliapietra
> > > > >> >
> > > > >> >
> > > > >> > On Tue, Dec 3, 2019 at 9:12 PM John Roesler <
> vvcep...@apache.org>
> > > > >> wrote:
> > > > >> >
> > > > >> > > Oh, yeah, I remember that conversation!
> > > > >> > >
> > > > >> > > Yes, then, I agree, if you're only storing state of the most
> > > recent
> > > > >> window
> > > > >> > > for each key, and the key you use for that state is actually
> the
> > > key
> > > > >> of the
> > > > >> > > records, then an aggressive compaction policy plus your custom
> > > > >> transformer
> > > > >> > > seems like a good way forward.
> > > > >> > >
> > > > >> > > What I was referring to is that, in Streams, the keys for
> window
> > > > >> > > aggregation state is actually composed of both the window
> itself
> > > and
> > > > >> the
> > > > >> > > key. In the DSL, it looks like "Windowed<K>". That results in
> the
> > > > >> store
> > > > >> > > having a unique key per window for each K, which is why we
> need
> > > > >> retention
> > > > >> > > as well as compaction for our changelogs. But for you, if you
> just
> > > > >> make the
> > > > >> > > key "K", then compaction alone should do the trick.
> > > > >> > >
> > > > >> > > And yes, if you manage the topic yourself, then Streams won't
> > > adjust
> > > > >> the
> > > > >> > > retention time. I think it might validate that the retention
> > > isn't too
> > > > >> > > short, but I don't remember offhand.
> > > > >> > >
> > > > >> > > Cheers, and let me know how it goes!
> > > > >> > > -John
> > > > >> > >
> > > > >> > > On Tue, Dec 3, 2019, at 23:03, Alessandro Tagliapietra wrote:
> > > > >> > > > Hi John,
> > > > >> > > >
> > > > >> > > > afaik grace period uses stream time
> > > > >> > > >
> > > > >> > >
> > > > >>
> > >
> https://kafka.apache.org/21/javadoc/org/apache/kafka/streams/kstream/Windows.html
> > > > >> > > > which is
> > > > >> > > > per partition, unfortunately we process data that's not in
> sync
> > > > >> between
> > > > >> > > > keys so each key needs to be independent and a key can have
> much
> > > > >> older
> > > > >> > > > data
> > > > >> > > > than the other.
> > > > >> > > >
> > > > >> > > > Having a small grace period would probably close old windows
> > > sooner
> > > > >> than
> > > > >> > > > expected. That's also why in my use case a custom store that
> > > just
> > > > >> stores
> > > > >> > > > the last window data for each key might work better. I had
> the
> > > same
> > > > >> issue
> > > > >> > > > with suppression and it has been reported here
> > > > >> > > > https://issues.apache.org/jira/browse/KAFKA-8769
> > > > >> > > > Oh I just saw that you're the one that helped me on slack
> and
> > > > >> created the
> > > > >> > > > issue (thanks again for that).
> > > > >> > > >
> > > > >> > > > The behavior that you mention about streams setting
> changelog
> > > > >> retention
> > > > >> > > > time is something they do on creation of the topic when the
> > > broker
> > > > >> has
> > > > >> > > auto
> > > > >> > > > creation enabled? Because we're using confluent cloud and I
> had
> > > to
> > > > >> create
> > > > >> > > > it manually.
> > > > >> > > > Regarding the change in the recovery behavior, with compact
> > > cleanup
> > > > >> > > policy
> > > > >> > > > shouldn't the changelog only keep the last value? That would
> > > make
> > > > >> the
> > > > >> > > > recovery faster and "cheaper" as it would only need to read
> a
> > > single
> > > > >> > > value
> > > > >> > > > per key (if the cleanup just happened) right?
> > > > >> > > >
> > > > >> > > > --
> > > > >> > > > Alessandro Tagliapietra
> > > > >> > > >
> > > > >> > > >
> > > > >> > > > On Tue, Dec 3, 2019 at 8:51 PM John Roesler <
> > > vvcep...@apache.org>
> > > > >> wrote:
> > > > >> > > >
> > > > >> > > > > Hey Alessandro,
> > > > >> > > > >
> > > > >> > > > > That sounds also like it would work. I'm wondering if it
> would
> > > > >> actually
> > > > >> > > > > change what you observe w.r.t. recovery behavior, though.
> > > Streams
> > > > >> > > already
> > > > >> > > > > sets the retention time on the changelog to equal the
> > > retention
> > > > >> time
> > > > >> > > of the
> > > > >> > > > > windows, for windowed aggregations, so you shouldn't be
> > > loading a
> > > > >> lot
> > > > >> > > of
> > > > >> > > > > window data for old windows you no longer care about.
> > > > >> > > > >
> > > > >> > > > > Have you set the "grace period" on your window
> definition? By
> > > > >> default,
> > > > >> > > it
> > > > >> > > > > is set to 24 hours, but you can set it as low as you like.
> > > E.g.,
> > > > >> if you
> > > > >> > > > > want to commit to having in-order data only, then you can
> set
> > > the
> > > > >> grace
> > > > >> > > > > period to zero. This _should_ let the broker clean up the
> > > > >> changelog
> > > > >> > > records
> > > > >> > > > > as soon as the window ends.
> > > > >> > > > >
> > > > >> > > > > Of course, the log cleaner doesn't run all the time, so
> > > there's
> > > > >> some
> > > > >> > > extra
> > > > >> > > > > delay in which "expired" data would still be visible in
> the
> > > > >> changelog,
> > > > >> > > but
> > > > >> > > > > it would actually be just the same as if you manage the
> store
> > > > >> yourself.
> > > > >> > > > >
> > > > >> > > > > Hope this helps!
> > > > >> > > > > -John
> > > > >> > > > >
> > > > >> > > > > On Tue, Dec 3, 2019, at 22:22, Alessandro Tagliapietra
> wrote:
> > > > >> > > > > > Thanks John for the explanation,
> > > > >> > > > > >
> > > > >> > > > > > I thought that with EOS enabled (which we have) it
> would in
> > > the
> > > > >> worst
> > > > >> > > > > case
> > > > >> > > > > > find a valid checkpoint and start the restore from there
> > > until
> > > > >> it
> > > > >> > > reached
> > > > >> > > > > > the last committed status, not completely from scratch.
> What
> > > > >> you say
> > > > >> > > > > > definitely makes sense now.
> > > > >> > > > > > Since we don't really need old time windows and we
> ensure
> > > data
> > > > >> is
> > > > >> > > ordered
> > > > >> > > > > > when processed I think I"ll just write a custom
> transformer
> > > to
> > > > >> keep
> > > > >> > > only
> > > > >> > > > > > the last window, store intermediate aggregation results
> in
> > > the
> > > > >> store
> > > > >> > > and
> > > > >> > > > > > emit a new value only when we receive data belonging to
> a
> > > new
> > > > >> window.
> > > > >> > > > > > That with a compact only changelog topic should keep the
> > > rebuild
> > > > >> > > data to
> > > > >> > > > > > the minimum as it would have only the last value for
> each
> > > key.
> > > > >> > > > > >
> > > > >> > > > > > Hope that makes sense
> > > > >> > > > > >
> > > > >> > > > > > Thanks again
> > > > >> > > > > >
> > > > >> > > > > > --
> > > > >> > > > > > Alessandro Tagliapietra
> > > > >> > > > > >
> > > > >> > > > > >
> > > > >> > > > > > On Tue, Dec 3, 2019 at 3:04 PM John Roesler <
> > > > >> vvcep...@apache.org>
> > > > >> > > wrote:
> > > > >> > > > > >
> > > > >> > > > > > > Hi Alessandro,
> > > > >> > > > > > >
> > > > >> > > > > > > To take a stab at your question, maybe it first
> doesn't
> > > find
> > > > >> it,
> > > > >> > > but
> > > > >> > > > > then
> > > > >> > > > > > > restores some data, writes the checkpoint, and then
> later
> > > on,
> > > > >> it
> > > > >> > > has to
> > > > >> > > > > > > re-initialize the task for some reason, and that's
> why it
> > > does
> > > > >> > > find a
> > > > >> > > > > > > checkpoint then?
> > > > >> > > > > > >
> > > > >> > > > > > > More to the heart of the issue, if you have EOS
> enabled,
> > > > >> Streams
> > > > >> > > _only_
> > > > >> > > > > > > records the checkpoint when the store is in a
> > > known-consistent
> > > > >> > > state.
> > > > >> > > > > For
> > > > >> > > > > > > example, if you have a graceful shutdown, Streams will
> > > flush
> > > > >> all
> > > > >> > > the
> > > > >> > > > > > > stores, commit all the transactions, and then write
> the
> > > > >> checkpoint
> > > > >> > > > > file.
> > > > >> > > > > > > Then, on re-start, it will pick up from that
> checkpoint.
> > > > >> > > > > > >
> > > > >> > > > > > > But as soon as it starts processing records, it
> removes
> > > the
> > > > >> > > checkpoint
> > > > >> > > > > > > file, so if it crashes while it was processing, there
> is
> > > no
> > > > >> > > checkpoint
> > > > >> > > > > file
> > > > >> > > > > > > there, and it will have to restore from the beginning
> of
> > > the
> > > > >> > > changelog.
> > > > >> > > > > > >
> > > > >> > > > > > > This design is there on purpose, because otherwise we
> > > cannot
> > > > >> > > actually
> > > > >> > > > > > > guarantee correctness... For example, if you are
> > > maintaining a
> > > > >> > > count
> > > > >> > > > > > > operation, and we process an input record i,
> increment the
> > > > >> count
> > > > >> > > and
> > > > >> > > > > write
> > > > >> > > > > > > it to the state store, and to the changelog topic.
> But we
> > > > >> crash
> > > > >> > > before
> > > > >> > > > > we
> > > > >> > > > > > > commit that transaction. Then, the write to the
> changelog
> > > > >> would be
> > > > >> > > > > aborted,
> > > > >> > > > > > > and we would re-process record i . However, we've
> already
> > > > >> updated
> > > > >> > > the
> > > > >> > > > > local
> > > > >> > > > > > > state store, so when we increment it again, it
> results in
> > > > >> > > > > double-counting
> > > > >> > > > > > > i. The key point here is that there's no way to do an
> > > atomic
> > > > >> > > operation
> > > > >> > > > > > > across two different systems (local state store and
> the
> > > > >> changelog
> > > > >> > > > > topic).
> > > > >> > > > > > > Since we can't guarantee that we roll back the
> incremented
> > > > >> count
> > > > >> > > when
> > > > >> > > > > the
> > > > >> > > > > > > changelog transaction is aborted, we can't keep the
> local
> > > > >> store
> > > > >> > > > > consistent
> > > > >> > > > > > > with the changelog.
> > > > >> > > > > > >
> > > > >> > > > > > > After a crash, the only way to ensure the local store
> is
> > > > >> consistent
> > > > >> > > > > with
> > > > >> > > > > > > the changelog is to discard the entire thing and
> rebuild
> > > it.
> > > > >> This
> > > > >> > > is
> > > > >> > > > > why we
> > > > >> > > > > > > have an invariant that the checkpoint file only exists
> > > when we
> > > > >> > > _know_
> > > > >> > > > > that
> > > > >> > > > > > > the local store is consistent with the changelog, and
> > > this is
> > > > >> why
> > > > >> > > > > you're
> > > > >> > > > > > > seeing so much bandwidth when re-starting from an
> unclean
> > > > >> shutdown.
> > > > >> > > > > > >
> > > > >> > > > > > > Note that it's definitely possible to do better than
> this,
> > > > >> and we
> > > > >> > > would
> > > > >> > > > > > > very much like to improve it in the future.
> > > > >> > > > > > >
> > > > >> > > > > > > Thanks,
> > > > >> > > > > > > -John
> > > > >> > > > > > >
> > > > >> > > > > > > On Tue, Dec 3, 2019, at 16:16, Alessandro Tagliapietra
> > > wrote:
> > > > >> > > > > > > > Hi John,
> > > > >> > > > > > > >
> > > > >> > > > > > > > thanks a lot for helping, regarding your message:
> > > > >> > > > > > > > - no we only have 1 instance of the stream
> application,
> > > > >> and it
> > > > >> > > > > always
> > > > >> > > > > > > > re-uses the same state folder
> > > > >> > > > > > > > - yes we're seeing most issues when restarting not
> > > > >> gracefully
> > > > >> > > due
> > > > >> > > > > > > exception
> > > > >> > > > > > > >
> > > > >> > > > > > > > I've enabled trace logging and filtering by a single
> > > state
> > > > >> store
> > > > >> > > the
> > > > >> > > > > > > > StoreChangelogReader messages are:
> > > > >> > > > > > > >
> > > > >> > > > > > > > Added restorer for changelog
> > > > >> > > > > sensors-stream-aggregate-store-changelog-0
> > > > >> > > > > > > > Added restorer for changelog
> > > > >> > > > > sensors-stream-aggregate-store-changelog-1
> > > > >> > > > > > > > Added restorer for changelog
> > > > >> > > > > sensors-stream-aggregate-store-changelog-2
> > > > >> > > > > > > > Did not find checkpoint from changelog
> > > > >> > > > > > > > sensors-stream-aggregate-store-changelog-2 for store
> > > > >> > > aggregate-store,
> > > > >> > > > > > > > rewinding to beginning.
> > > > >> > > > > > > > Did not find checkpoint from changelog
> > > > >> > > > > > > > sensors-stream-aggregate-store-changelog-1 for store
> > > > >> > > aggregate-store,
> > > > >> > > > > > > > rewinding to beginning.
> > > > >> > > > > > > > Did not find checkpoint from changelog
> > > > >> > > > > > > > sensors-stream-aggregate-store-changelog-0 for store
> > > > >> > > aggregate-store,
> > > > >> > > > > > > > rewinding to beginning.
> > > > >> > > > > > > > No checkpoint found for task 0_2 state store
> > > aggregate-store
> > > > >> > > > > changelog
> > > > >> > > > > > > > sensors-stream-aggregate-store-changelog-2 with EOS
> > > turned
> > > > >> on.
> > > > >> > > > > > > > Reinitializing the task and restore its state from
> the
> > > > >> beginning.
> > > > >> > > > > > > > No checkpoint found for task 0_1 state store
> > > aggregate-store
> > > > >> > > > > changelog
> > > > >> > > > > > > > sensors-stream-aggregate-store-changelog-1 with EOS
> > > turned
> > > > >> on.
> > > > >> > > > > > > > Reinitializing the task and restore its state from
> the
> > > > >> beginning.
> > > > >> > > > > > > > No checkpoint found for task 0_0 state store
> > > aggregate-store
> > > > >> > > > > changelog
> > > > >> > > > > > > > sensors-stream-aggregate-store-changelog-0 with EOS
> > > turned
> > > > >> on.
> > > > >> > > > > > > > Reinitializing the task and restore its state from
> the
> > > > >> beginning.
> > > > >> > > > > > > > Found checkpoint 709937 from changelog
> > > > >> > > > > > > > sensors-stream-aggregate-store-changelog-2 for store
> > > > >> > > aggregate-store.
> > > > >> > > > > > > > Restoring partition
> > > > >> sensors-stream-aggregate-store-changelog-2
> > > > >> > > from
> > > > >> > > > > > > offset
> > > > >> > > > > > > > 709937 to endOffset 742799
> > > > >> > > > > > > > Found checkpoint 3024234 from changelog
> > > > >> > > > > > > > sensors-stream-aggregate-store-changelog-1 for store
> > > > >> > > aggregate-store.
> > > > >> > > > > > > > Restoring partition
> > > > >> sensors-stream-aggregate-store-changelog-1
> > > > >> > > from
> > > > >> > > > > > > offset
> > > > >> > > > > > > > 3024234 to endOffset 3131513
> > > > >> > > > > > > > Found checkpoint 14514072 from changelog
> > > > >> > > > > > > > sensors-stream-aggregate-store-changelog-0 for store
> > > > >> > > aggregate-store.
> > > > >> > > > > > > > Restoring partition
> > > > >> sensors-stream-aggregate-store-changelog-0
> > > > >> > > from
> > > > >> > > > > > > offset
> > > > >> > > > > > > > 14514072 to endOffset 17116574
> > > > >> > > > > > > > Restored from
> > > sensors-stream-aggregate-store-changelog-2 to
> > > > >> > > > > > > aggregate-store
> > > > >> > > > > > > > with 966 records, ending offset is 711432, next
> starting
> > > > >> > > position is
> > > > >> > > > > > > 711434
> > > > >> > > > > > > > Restored from
> > > sensors-stream-aggregate-store-changelog-2 to
> > > > >> > > > > > > aggregate-store
> > > > >> > > > > > > > with 914 records, ending offset is 712711, next
> starting
> > > > >> > > position is
> > > > >> > > > > > > 712713
> > > > >> > > > > > > > Restored from
> > > sensors-stream-aggregate-store-changelog-1 to
> > > > >> > > > > > > aggregate-store
> > > > >> > > > > > > > with 18 records, ending offset is 3024261, next
> starting
> > > > >> > > position is
> > > > >> > > > > > > 3024262
> > > > >> > > > > > > >
> > > > >> > > > > > > >
> > > > >> > > > > > > > why it first says it didn't find the checkpoint and
> > > then it
> > > > >> does
> > > > >> > > > > find it?
> > > > >> > > > > > > > It seems it loaded about 2.7M records (sum of
> offset
> > > > >> difference
> > > > >> > > in
> > > > >> > > > > the
> > > > >> > > > > > > > "restorting partition ...." messages) right?
> > > > >> > > > > > > > Maybe should I try to reduce the checkpoint
> interval?
> > > > >> > > > > > > >
> > > > >> > > > > > > > Regards
> > > > >> > > > > > > >
> > > > >> > > > > > > > --
> > > > >> > > > > > > > Alessandro Tagliapietra
> > > > >> > > > > > > >
> > > > >> > > > > > > >
> > > > >> > > > > > > > On Mon, Dec 2, 2019 at 9:18 AM John Roesler <
> > > > >> vvcep...@apache.org
> > > > >> > > >
> > > > >> > > > > wrote:
> > > > >> > > > > > > >
> > > > >> > > > > > > > > Hi Alessandro,
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > I'm sorry to hear that.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > The restore process only takes one factor into
> > > account:
> > > > >> the
> > > > >> > > current
> > > > >> > > > > > > offset
> > > > >> > > > > > > > > position of the changelog topic is stored in a
> local
> > > file
> > > > >> > > > > alongside the
> > > > >> > > > > > > > > state stores. On startup, the app checks if the
> > > recorded
> > > > >> > > position
> > > > >> > > > > lags
> > > > >> > > > > > > the
> > > > >> > > > > > > > > latest offset in the changelog. If so, then it
> reads
> > > the
> > > > >> > > missing
> > > > >> > > > > > > changelog
> > > > >> > > > > > > > > records before starting processing.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > Thus, it would not restore any old window data.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > There might be a few different things going on to
> > > explain
> > > > >> your
> > > > >> > > > > > > observation:
> > > > >> > > > > > > > > * if there is more than one instance in your
> Streams
> > > > >> cluster,
> > > > >> > > > > maybe the
> > > > >> > > > > > > > > task is "flopping" between instances, so each
> instance
> > > > >> still
> > > > >> > > has to
> > > > >> > > > > > > recover
> > > > >> > > > > > > > > state, since it wasn't the last one actively
> > > processing
> > > > >> it.
> > > > >> > > > > > > > > * if the application isn't stopped gracefully, it
> > > might
> > > > >> not
> > > > >> > > get a
> > > > >> > > > > > > chance
> > > > >> > > > > > > > > to record its offset in that local file, so on
> > > restart it
> > > > >> has
> > > > >> > > to
> > > > >> > > > > > > restore
> > > > >> > > > > > > > > some or all of the state store from changelog.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > Or it could be something else; that's just what
> comes
> > > to
> > > > >> mind.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > If you want to get to the bottom of it, you can
> take a
> > > > >> look at
> > > > >> > > the
> > > > >> > > > > > > logs,
> > > > >> > > > > > > > > paying close attention to which tasks are
> assigned to
> > > > >> which
> > > > >> > > > > instances
> > > > >> > > > > > > after
> > > > >> > > > > > > > > each restart. You can also look into the logs from
> > > > >> > > > > > > > >
> > > > >> > >
> > > `org.apache.kafka.streams.processor.internals.StoreChangelogReader`
> > > > >> > > > > > > (might
> > > > >> > > > > > > > > want to set it to DEBUG or TRACE level to really
> see
> > > > >> what's
> > > > >> > > > > happening).
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > I hope this helps!
> > > > >> > > > > > > > > -John
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > On Sun, Dec 1, 2019, at 21:25, Alessandro
> Tagliapietra
> > > > >> wrote:
> > > > >> > > > > > > > > > Hello everyone,
> > > > >> > > > > > > > > >
> > > > >> > > > > > > > > > we're having a problem with bandwidth usage on
> > > streams
> > > > >> > > > > application
> > > > >> > > > > > > > > startup,
> > > > >> > > > > > > > > > our current setup does this:
> > > > >> > > > > > > > > >
> > > > >> > > > > > > > > > ...
> > > > >> > > > > > > > > > .groupByKey()
> > > > >> > > > > > > > > >
> > > > >> > > .windowedBy<TimeWindow>(TimeWindows.of(Duration.ofMinutes(1)))
> > > > >> > > > > > > > > > .aggregate(
> > > > >> > > > > > > > > > { MetricSequenceList(ArrayList()) },
> > > > >> > > > > > > > > > { key, value, aggregate ->
> > > > >> > > > > > > > > > aggregate.getRecords().add(value)
> > > > >> > > > > > > > > > aggregate
> > > > >> > > > > > > > > > },
> > > > >> > > > > > > > > > Materialized.`as`<String,
> > > MetricSequenceList,
> > > > >> > > > > > > WindowStore<Bytes,
> > > > >> > > > > > > > > >
> > > > >> > > > > > > > >
> > > > >> > > > > > >
> > > > >> > > > >
> > > > >> > >
> > > > >>
> > >
> ByteArray>>("aggregate-store").withKeySerde(Serdes.String()).withValueSerde(Settings.getValueSpecificavroSerde())
> > > > >> > > > > > > > > > )
> > > > >> > > > > > > > > > .toStream()
> > > > >> > > > > > > > > > .flatTransform(TransformerSupplier {
> > > > >> > > > > > > > > > ...
> > > > >> > > > > > > > > >
> > > > >> > > > > > > > > > basically in each window we append the new
> values
> > > and
> > > > >> then do
> > > > >> > > > > some
> > > > >> > > > > > > other
> > > > >> > > > > > > > > > logic with the array of windowed values.
> > > > >> > > > > > > > > > The aggregate-store changelog topic
> configuration
> > > uses
> > > > >> > > > > > > compact,delete as
> > > > >> > > > > > > > > > cleanup policy and has 12 hours of retention.
> > > > >> > > > > > > > > >
> > > > >> > > > > > > > > > What we've seen is that on application startup
> it
> > > takes
> > > > >> a
> > > > >> > > couple
> > > > >> > > > > > > minutes
> > > > >> > > > > > > > > to
> > > > >> > > > > > > > > > rebuild the state store, even if the state store
> > > > >> directory is
> > > > >> > > > > > > persisted
> > > > >> > > > > > > > > > across restarts. That along with an exception
> that
> > > > >> caused the
> > > > >> > > > > docker
> > > > >> > > > > > > > > > container to be restarted a couple hundreds
> times
> > > > >> caused a
> > > > >> > > big
> > > > >> > > > > > > confluent
> > > > >> > > > > > > > > > cloud bill compared to what we usually spend
> (1/4
> > > of a
> > > > >> full
> > > > >> > > > > month in
> > > > >> > > > > > > 1
> > > > >> > > > > > > > > day).
> > > > >> > > > > > > > > >
> > > > >> > > > > > > > > > What I think is happening is that the topic is
> > > keeping
> > > > >> all
> > > > >> > > the
> > > > >> > > > > > > previous
> > > > >> > > > > > > > > > windows even with the compacting policy because
> each
> > > > >> key is
> > > > >> > > the
> > > > >> > > > > > > original
> > > > >> > > > > > > > > > key + the timestamp not just the key. Since we
> don't
> > > > >> care
> > > > >> > > about
> > > > >> > > > > > > previous
> > > > >> > > > > > > > > > windows as the flatTransform after the
> toStream()
> > > makes
> > > > >> sure
> > > > >> > > > > that we
> > > > >> > > > > > > > > don't
> > > > >> > > > > > > > > > process old windows (a custom suppressor
> basically)
> > > is
> > > > >> there
> > > > >> > > a
> > > > >> > > > > way to
> > > > >> > > > > > > > > only
> > > > >> > > > > > > > > > keep the last window so that the store
> rebuilding
> > > goes
> > > > >> > > faster and
> > > > >> > > > > > > without
> > > > >> > > > > > > > > > rebuilding old windows too? Or should I create a
> > > custom
> > > > >> > > window
> > > > >> > > > > using
> > > > >> > > > > > > the
> > > > >> > > > > > > > > > original key as key so that the compaction keeps
> > > only
> > > > >> the
> > > > >> > > last
> > > > >> > > > > window
> > > > >> > > > > > > > > data?
> > > > >> > > > > > > > > >
> > > > >> > > > > > > > > > Thank you
> > > > >> > > > > > > > > >
> > > > >> > > > > > > > > > --
> > > > >> > > > > > > > > > Alessandro Tagliapietra
> > > > >> > > > > > > > > >
> > > > >> > > > > > > > >
> > > > >> > > > > > > >
> > > > >> > > > > > >
> > > > >> > > > > >
> > > > >> > > > >
> > > > >> > > >
> > > > >> > >
> > > > >> >
> > > > >>
> > > > >
> > > >
> > >
> >
>
