> instability of the broker cluster might have been caused by a snappy
> un-compression error. In our case, the consumer and producer happens to be
> the same application so restarting the client made the recovery of the
> ...
> The un-compression error is likely to be caused by incompatible snappy
> version used by the producer.

It is unclear to me why restarting clients would fix the compatibility
issue. Or do you mean you bounced in the right version of the snappy
jar?

Also, what version of the broker are you on?

> Also, it appears that when the metric FailedProduceRequestsPerSec (which
> captures the above error) raises to a certain level (around 20/s), it will
> start to have impact on the stability of the brokers, including significant
> increase of GC time.
> 
> How does Kafka handle such un-compression errors? Is it possible that the
> ByteBuffer from the compressed messages are not released quick enough when
> such errors happen at high rate?

This is surprising. The only thing I can think of is if everything
gets rejected there will be less IO by virtue of the fact that nothing
gets flushed to disk, but in terms of GC I don't quite see why it
would cause an increase with the errors alone since the broker
decompressed the message-set no matter what in order to assign
offsets. So the byte buffers need to be allocated anyway.

What is the requests per sec that you see without failed requests?

Finally, is this easily reproducible?

Joel


On Wed, Jan 21, 2015 at 11:03:40AM -0800, Allen Wang wrote:
> After a closer look to other metrics and broker logs, we found that the
> instability of the broker cluster might have been caused by a snappy
> un-compression error. In our case, the consumer and producer happens to be
> the same application so restarting the client made the recovery of the
> broker cluster. Here is the error we saw in the broker log:
> 
>   2015-01-19 00:07:24,891 ERROR kafka.utils.Logging$class:103
> [kafka-request-handler-0] [error] [KafkaApi-7] Error processing
> ProducerRequest with correlation id 393323 from client surorouter-mantis on
> partition [logblob-networkerror,0]
> 
> kafka.common.KafkaException: Error in validating messages while appending
> to log 'logblob-networkerror-0'
> 
> at kafka.log.Log.liftedTree1$1(Log.scala:254)
> 
> at kafka.log.Log.append(Log.scala:251)
> 
> at kafka.cluster.Partition.appendMessagesToLeader(Partition.scala:354)
> 
> at
> kafka.server.KafkaApis$$anonfun$appendToLocalLog$2.apply(KafkaApis.scala:376)
> 
> at
> kafka.server.KafkaApis$$anonfun$appendToLocalLog$2.apply(KafkaApis.scala:366)
> 
> at
> scala.collection.TraversableLike$$anonfun$map$1.apply(TraversableLike.scala:233)
> 
> at
> scala.collection.TraversableLike$$anonfun$map$1.apply(TraversableLike.scala:233)
> 
> at
> scala.collection.mutable.HashMap$$anonfun$foreach$1.apply(HashMap.scala:95)
> 
> at
> scala.collection.mutable.HashMap$$anonfun$foreach$1.apply(HashMap.scala:95)
> 
> at scala.collection.Iterator$class.foreach(Iterator.scala:772)
> 
> at scala.collection.mutable.HashTable$$anon$1.foreach(HashTable.scala:157)
> 
> at
> scala.collection.mutable.HashTable$class.foreachEntry(HashTable.scala:190)
> 
> at scala.collection.mutable.HashMap.foreachEntry(HashMap.scala:45)
> 
> at scala.collection.mutable.HashMap.foreach(HashMap.scala:95)
> 
> at scala.collection.TraversableLike$class.map(TraversableLike.scala:233)
> 
> at scala.collection.mutable.HashMap.map(HashMap.scala:45)
> 
> at kafka.server.KafkaApis.appendToLocalLog(KafkaApis.scala:366)
> 
> at kafka.server.KafkaApis.handleProducerRequest(KafkaApis.scala:292)
> 
> at kafka.server.KafkaApis.handle(KafkaApis.scala:185)
> 
> at kafka.server.KafkaRequestHandler.run(KafkaRequestHandler.scala:42)
> 
> at java.lang.Thread.run(Thread.java:745)
> 
> Caused by: java.io.IOException: failed to uncompress the chunk:
> FAILED_TO_UNCOMPRESS(5)
> 
> at
> org.xerial.snappy.SnappyInputStream.hasNextChunk(SnappyInputStream.java:362)
> 
> at org.xerial.snappy.SnappyInputStream.rawRead(SnappyInputStream.java:159)
> 
> at org.xerial.snappy.SnappyInputStream.read(SnappyInputStream.java:142)
> 
> at java.io.InputStream.read(InputStream.java:101)
> 
> at
> kafka.message.ByteBufferMessageSet$$anonfun$decompress$1.apply$mcI$sp(ByteBufferMessageSet.scala:68)
> 
> at
> kafka.message.ByteBufferMessageSet$$anonfun$decompress$1.apply(ByteBufferMessageSet.scala:68)
> 
> at
> kafka.message.ByteBufferMessageSet$$anonfun$decompress$1.apply(ByteBufferMessageSet.scala:68)
> 
> at scala.collection.immutable.Stream$.continually(Stream.scala:1104)
> 
> at
> scala.collection.immutable.Stream$$anonfun$continually$1.apply(Stream.scala:1104)
> 
> at
> scala.collection.immutable.Stream$$anonfun$continually$1.apply(Stream.scala:1104)
> 
> at scala.collection.immutable.Stream$Cons.tail(Stream.scala:1060)
> 
> at scala.collection.immutable.Stream$Cons.tail(Stream.scala:1052)
> 
> at
> scala.collection.immutable.Stream$$anonfun$takeWhile$1.apply(Stream.scala:782)
> 
> at
> scala.collection.immutable.Stream$$anonfun$takeWhile$1.apply(Stream.scala:782)
> 
> at scala.collection.immutable.Stream$Cons.tail(Stream.scala:1060)
> 
> at scala.collection.immutable.Stream$Cons.tail(Stream.scala:1052)
> 
> at scala.collection.immutable.Stream.foreach(Stream.scala:527)
> 
> The un-compression error is likely to be caused by incompatible snappy
> version used by the producer.
> 
> Also, it appears that when the metric FailedProduceRequestsPerSec (which
> captures the above error) raises to a certain level (around 20/s), it will
> start to have impact on the stability of the brokers, including significant
> increase of GC time.
> 
> How does Kafka handle such un-compression errors? Is it possible that the
> ByteBuffer from the compressed messages are not released quick enough when
> such errors happen at high rate?
> 
> 
> 
> 
> On Thu, Jan 15, 2015 at 5:51 PM, Joel Koshy <jjkosh...@gmail.com> wrote:
> 
> > Not sure what could be going on..
> >
> > What version of the client and the broker are you on?
> >
> > Can you verify from the state change logs the time it took for
> > leadership to move to the preferred leader?
> >
> > Were there long GCs in your brokers?  Can you also look for zookeeper
> > session expirations in your broker logs?
> >
> > It is odd that restarting your consumers appears to have resolved your
> > issues. What config overrides did you use for your consumers? E.g.,
> > did you override the max wait time?
> >
> > How many consumers/producers are we talking about here?
> >
> > Thanks,
> >
> > Joel
> >
> > On Thu, Jan 15, 2015 at 11:55:35AM -0800, Allen Wang wrote:
> > > We are using the scala producer. From producer side, we have seen a lot
> > of
> > > error messages in producer during the time of incoming message drop:
> > >
> > > Produce request with correlation id 31616255 failed due to
> > > [trace_annotation,10]: kafka.common.NotLeaderForPartitionException
> > >
> > > And a few (far less than the NotLeaderForPartitionException) of those:
> > >
> > > 2015-01-15 17:57:54,412 WARN KafkaSink-kafka_0_8_logtrace_asg-Sender-2
> > > DefaultEventHandler - Failed to send producer request with correlation id
> > > 31554484 to broker 20 with
> > > data for partitions [trace_annotation,9]
> > > java.net.SocketTimeoutException
> > >
> > > What's interesting is that the broker cluster recovered from the message
> > > drop only after we restarted consumers. Also during that time, we have
> > > observed is that the garbage collection time for the brokers increased 5
> > > times. The AllBrokersFetchRequestRateAndTimeMs_9X metric from the
> > consumer
> > > side also increased from a few hundred ms to several seconds.
> > >
> > > What we don't know is whether the garbage collection time increase is the
> > > cause or the effect of the problem. It seems that after the rebalance,
> > some
> > > resources in the brokers was tied up and it was only released after
> > restart
> > > of consumers.
> > >
> > >
> > > On Thu, Jan 15, 2015 at 8:15 AM, Joel Koshy <jjkosh...@gmail.com> wrote:
> > >
> > > > > Is leadership rebalance a safe operation?
> > > >
> > > > Yes - we use it routinely. For any partition, there should only be a
> > > > brief (order of seconds) period of rejected messages as leaders move.
> > > > When that happens the client should refresh metadata and discover the
> > > > new leader. Are you using the Java producer? Do you see any errors in
> > > > the producer logs?
> > > >
> > > > On Wed, Jan 14, 2015 at 06:36:27PM -0800, Allen Wang wrote:
> > > > > Hello,
> > > > >
> > > > > We did a manual leadership rebalance (using
> > > > > PreferredReplicaLeaderElectionCommand) under heavy load and found
> > that
> > > > > there is a significant drop of incoming messages to the broker
> > cluster
> > > > for
> > > > > more than an hour. Looking at broker log, we found a lot of errors
> > like
> > > > > this:
> > > > >
> > > > > 2015-01-15 00:00:03,330 ERROR kafka.utils.Logging$class:103
> > > > > [kafka-processor-7101-0] [error] Closing socket for /10.213.156.41
> > > > > because of error
> > > > > java.io.IOException: Connection reset by peer
> > > > >       at sun.nio.ch.FileDispatcherImpl.read0(Native Method)
> > > > >       at sun.nio.ch.SocketDispatcher.read(SocketDispatcher.java:39)
> > > > >       at sun.nio.ch.IOUtil.readIntoNativeBuffer(IOUtil.java:223)
> > > > >       at sun.nio.ch.IOUtil.read(IOUtil.java:197)
> > > > >       at
> > sun.nio.ch.SocketChannelImpl.read(SocketChannelImpl.java:379)
> > > > >       at kafka.utils.Utils$.read(Utils.scala:375)
> > > > >       at
> > > >
> > kafka.network.BoundedByteBufferReceive.readFrom(BoundedByteBufferReceive.scala:54)
> > > > >       at kafka.network.Processor.read(SocketServer.scala:347)
> > > > >       at kafka.network.Processor.run(SocketServer.scala:245)
> > > > >       at java.lang.Thread.run(Thread.java:745)
> > > > >
> > > > >
> > > > > Is leadership rebalance a safe operation?
> > > > >
> > > > > Thanks.
> > > >
> > > >
> >

Reply via email to