Here is a link to your router configuration with all the details of how to do the port forwarding: https://www.tp-link.com/us/user-guides/tl-wr841n_v14/chapter-4-configure-the-router-in-wireless-router-mode#ug-sub-title-7
--- FLAVIU RADULESCU | Lumminary | lumminary.com<https://lumminary.com/> PLEASE NOTE: This email and any file transmitted are confidential and/or legally privileged and intended only for the person(s) directly addressed. If you are not the intended recipient, any use, copying, transmission, distribution, or other forms of dissemination is strictly prohibited. If you have received this email in error, please notify the sender immediately and permanently delete the email and files, if any. From: Flaviu Radulescu <flaviu.radule...@lumminary.com.INVALID> Sent: 04 July 2019 23:05 To: users@httpd.apache.org Subject: Re: [users@httpd] Expose my server to internet You need to do port forwarding on your router from the public ip port 80 to the internal (server) ip port 80. Also, configure your router to always give the same ip (static ip) to your server. This way all the requests coming from outside on port 80 are forwarded to internal server ip on port 80, the server response are going to normally be routed to the source request, but you just need the outside traffic to be routed the the server ip. So, search on your router configuration for port forwarding. That’s all you need to do, nothing on the apache, just standard configuration. Apologies for brevity and/or typos. An iPhone was involved in writing this message. On 4 Jul 2019, at 21:52, Richard szajkowski <va3...@gmail.com<mailto:va3...@gmail.com>> wrote: Yes , has to be set to static make sure your IP is out side the DCHP pool , that way it won’t be given to any one else by mistake . That’s why I start my DHCP pool at .100 Richard Szajkowski On Jul 4, 2019, at 2:12 PM, Padmahas Bn <padma...@gmail.com<mailto:padma...@gmail.com>> wrote: Hello VA3RZS, Yes, my internal IP address is static. It's 192.168.0.106. But DHCP is set to "Automatic". Does that affect? Thank you. On Thu, Jul 4, 2019 at 11:27 PM VA3RZS <va3...@gmail.com<mailto:va3...@gmail.com>> wrote: It’s your inside address that needs to be static , yes the router will just be fine Your box will need to be on something like 192.168.1( or 0) .50 let’s say and in the router that ip and port should point to that ip and port I have all my static ip’s under 100 and dhcp is above 100 Hope this helps Richard Szajkowski On Jul 4, 2019, at 1:45 PM, Padmahas Bn <padma...@gmail.com<mailto:padma...@gmail.com>> wrote: Hello Bob, Richar and Mark, Thank you for your response. @Bob Cochran, Yeah, I can access port 80 form my local but not from internet. I'm trying to access my IP from mobile network (Not wifi, from data pack) Please find my comments below. I'm not sure what you mean by "successfully logged in" into your router. As I said, I've registered a free domain name on NoIP.com<http://NoIP.com>, I had to configure dynamic DNS in my router to synchronize my external/public IP (since it is dynamic in nature) with my registered domain name automatically. So i meant that configuration was successful. Your router will need to support NAT to translate your local IP address to the one on the Internet. I'm using TP-Link 300M Wireless N Router, Model No. TL-WR841N / TL-WR841ND. I hope this supports NAT. sudo tcpdump -i enp2s0 -vvvSXn port 80 I'm not sure which parameters I need to change here according to my system. I just ran the same command and got output as tcpdump: enp2s0: No such device exists (SIOCGIFHWADDR: No such device) @Richard szajkowski, It's my home network, and have dynamic IP address. But I've updated the IP address which I got from google search "what is my ip", while forwarding the port. @Mark J Bradakis, Thank you for the reference. I'll take a look. Thank you. On Thu, Jul 4, 2019 at 6:16 PM Mark J Bradakis <m...@bradakis.com<mailto:m...@bradakis.com>> wrote: Some of the tools here might assist in tracking down what is visible to the world and what is not. https://tools.dnsstuff.com/#<https://tools.dnsstuff.com/> mjb. --------------------------------------------------------------------- To unsubscribe, e-mail: users-unsubscr...@httpd.apache.org<mailto:users-unsubscr...@httpd.apache.org> For additional commands, e-mail: users-h...@httpd.apache.org<mailto:users-h...@httpd.apache.org>
