Hi List,
I am getting the following in my log (below) when starting apache. I am
not clear why since i have ssl certs defined in
/etc/apache2/sites-enabled/default-ssl.conf
Verified default-ssl.conf is enabled and so is the ssl mod.
What am I doing wrong?
--- snip ---
[Sat Jun 20 23:55:47.151064 2015] [ssl:emerg] [pid 26495] AH02240:
Server should be SSL-aware but has no certificate configured [Hint:
SSLCertificateFile] ((null):0)
[Sat Jun 20 23:55:47.151132 2015] [ssl:emerg] [pid 26495] AH02312: Fatal
error initialising mod_ssl, exiting.
--- snip ---
/etc/apache2/sites-available $ a2ensite default-ssl.conf
Site default-ssl already enabled
/etc/apache2/sites-available $ sudo a2enmod ssl
Considering dependency setenvif for ssl:
Module setenvif already enabled
Considering dependency mime for ssl:
Module mime already enabled
Considering dependency socache_shmcb for ssl:
Module socache_shmcb already enabled
Module ssl already enabled
/etc/apache2/sites-available $ ls -l
/etc/apache2/sites-enabled/default-ssl.conf
lrwxrwxrwx 1 root 35 Jun 20 23:33
/etc/apache2/sites-enabled/default-ssl.conf ->
../sites-available/default-ssl.conf
Cert files are there
/etc/apache2/sites-available $ wc -l /etc/apache2/ssl/apache.crt
24 /etc/apache2/ssl/apache.crt
/etc/apache2/sites-available $ wc -l /etc/apache2/ssl/apache.key
28 /etc/apache2/ssl/apache.key
-- /etc/apache2/sites-enabled/default-ssl.conf ---
cat /etc/apache2/sites-enabled/default-ssl.conf
<IfModule mod_ssl.c>
<VirtualHost _default_:443>
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
# Available loglevels: trace8, ..., trace1, debug, info,
notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# For most configuration files from conf-available/, which are
# enabled or disabled at a global level, it is possible to
# include a line for only one particular virtual host. For
example the
# following line enables the CGI configuration for this host
only
# after it has been globally disabled with "a2disconf".
#Include conf-available/serve-cgi-bin.conf
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# A self-signed (snakeoil) certificate can be created by
installing
# the ssl-cert package. See
# /usr/share/doc/apache2/README.Debian.gz for more info.
# If both key and certificate are stored in the same file,
only the
# SSLCertificateFile directive is needed.
# SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem
# SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key
SSLCertificateFile /etc/apache2/ssl/apache.crt
SSLCertificateKeyFile /etc/apache2/ssl/apache.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the
provided
# Makefile to update the hash symlinks after
changes.
#SSLCACertificatePath /etc/ssl/certs/
#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the
provided
# Makefile to update the hash symlinks after
changes.
#SSLCARevocationPath /etc/apache2/ssl.crl/
#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation.
This means that
# the standard Auth/DBMAuth methods can be used for
access control. The
# user name is the `one line' version of the client's
X.509 certificate.
# Note that no password is obtained from the user. Every entry in the
user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables:
SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded
certificates of the
# server (always existing) and the client (only existing
when client
# authentication is used). This can be used to import
the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment
variables.
# Per default this exportation is switched off for
performance reasons,
# because the extraction step is an expensive operation
and is usually
# useless for serving static content. So one usually
enables the
# exportation for CGI and SSI requests only.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation
handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory /usr/lib/cgi-bin>
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant
shutdown
# approach is that mod_ssl sends the close notify alert but doesn't
wait for
# the close notify alert from client. When you need a
different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is
closed, i.e. no
# SSL close notify alert is send or allowed to received.
This violates
# the SSL/TLS standard but is needed for some brain-dead
browsers. Use
# this when you receive I/O errors because of the
standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection
is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for
the close notify
# alert of the client. This is 100% SSL/TLS standard
compliant, but in
# practice often causes hanging connections with
brain-dead browsers. Use
# this only for browsers where you know that their SSL
implementation
# works correctly.
# Notice: Most problems of broken clients are also related to
the HTTP
# keep-alive facility, so you usually additionally want to
disable
# keep-alive for those clients, too. Use variable "nokeepalive" for
this.
# Similarly, one has to force some clients to use HTTP/1.0 to
workaround
# their broken HTTP/1.1 implementation. Use variables
"downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-6]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# MSIE 7 and newer should be able to use keepalive
BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
</VirtualHost>
</IfModule>
-- snip ---
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscr...@httpd.apache.org
For additional commands, e-mail: users-h...@httpd.apache.org
