Thanks Jet !!
I am not using default Apache. I have installed Apache 2.2.8 on RHEL5.1 in
/usr/MYAPP/Apa directory. With respect to this path I have modified the script(
script pasted below) but it is not working(so many commands directories
executable not found). I assume there is only one Apache installation required
that will have two different conf directory (/usr/MYAPP/Apa/conf
/usr/MYAPP/Apa/NewConf)exists. Each conf directroy will have its own
httpd.conf/ssl.conf so that I can configure IP based virtual server. Finally,
with these configs, different daemon can be started and stopped.
Note : I don't want these daemon to start at boot time. Is there anything wrong
in following script provided apache 2.2.8 is installed on RHEL5.1 in
/usr/MYAPP/Apa. I re-state my requirement
I would like to configure IP based virtual server in apache2.2.8 on RHEL5.1 so
that they can be started/stopped as a different daemon without affecting each
other.
runApache.sh
export ORIG_APACHE=Apa
export NEW_APACHE=Apa2
export BINDIR=/usr/sbin
export ETC=/usr/MYAPP
export APPLOG=/home
export VAR=/var
export OLD_CONF=$ETC/$ORIG_APACHE
export NEW_LOG=$APPLOG/$NEW_APACHE
export NEW_CONF=$ETC/$NEW_APACHE
export NEWBINNAME=httpd1
mkdir /home/Apa2
export BINNAME=httpd
l n-s $NEW_LOG $NEW_CONF/logs
ln -s $ETC/$ORIG_APACHE/modules $NEW_CONF/modules
ln -s $VAR/run $NEW_CONF/run
# link in a new executable
ln -s $BINDIR/$BINNAME $BINDIR/$NEWBINNAME
# copy in the configuration files
mkdir $NEW_CONF/conf
cp -Rp $OLD_CONF/conf/* $NEW_CONF/conf/
# make modifications to the configuration files
sed -e "s/$ORIG_APACHE\.pid/$NEW_APACHE\.worker\.pid/g" \
-e "s/\/$ORIG_APACHE/\/$NEW_APACHE/g" --in-place $NEW_CONF/conf/httpd.conf
# copy in the subordinate configuration files
mkdir $NEW_CONF/conf.d cp -Rp $OLD_CONF/conf.d/* $NEW_CONF/conf.d/
# add 2 lines into /etc/sysconfig/$NEW_APACHE
echo "HTTPD=/usr/sbin/$NEWBINNAME" >> $ETC/sysconfig/$NEW_APACHE
echo "OPTIONS=\"-d $ETC/$NEW_APACHE\"" >> $ETC/sysconfig/$NEW_APACHE
# Copy the rc start script
cp $ETC/init.d/$ORIG_APACHE $ETC/init.d/$NEW_APACHE
#Add the the automatic startup scripts and set to start on boot
chkconfig --add $NEW_APACHE chkconfig $NEW_APACHE on
\Vinay
-----Original Message-----
From: Wilda, Jet [mailto:[EMAIL PROTECTED]
Sent: Friday, May 02, 2008 11:40 PM
To: [email protected]
Subject: RE: [EMAIL PROTECTED] RE:How to start apache daemon in apache 2.2.8 on
RHEL 5.1
I'm not familiar with the Windows side, however it is effectively separate
daemon processes that can be stopped and started independently. Remember that
you need to over ride the /etc/init.d/functions killproc if you use symlinks
for the binaries (there are pros and cons to this). Here is the code we use in
our /etc/init.d/$NEW_APACHE scripts to make sure it doesn't kill all the Apache
instances running.
# A function to stop a program.
killproc() {
RC=0; delay=3
# Test syntax.
if [ "$#" -eq 0 ]; then
echo $"Usage: killproc [ -d delay] {program} [signal]"
return 1
fi
if [ "$1" = "-d" ]; then
delay=$2
shift 2
fi
notset=0
# check for second arg to be kill level
if [ -n "$2" ]; then
killlevel=$2
else
notset=1
killlevel="-9"
fi
# Save basename.
base=${1##*/}
# Find pid.
pid=
if [ -f $pidfile ]; then
local line p
read line < $pidfile
for p in $line ; do
[ -z "${p//[0-9]/}" -a -d "/proc/$p" ] && pid="$pid $p"
done
fi
# Kill it.
if [ -n "${pid:-}" ] ; then
[ "$BOOTUP" = "verbose" -a -z "$LSB" ] && echo -n "$base "
if [ "$notset" -eq "1" ] ; then
if checkpid $pid 2>&1; then
# TERM first, then KILL if not dead
kill -TERM $pid >/dev/null 2>&1
usleep 100000
if checkpid $pid && sleep 1 &&
checkpid $pid && sleep $delay &&
checkpid $pid ; then
kill -KILL $pid >/dev/null 2>&1
usleep 100000
fi
fi
checkpid $pid
RC=$?
NUM=`ps -ef | grep $prog | grep -v "grep" | grep -v
"service" | grep -v "init.d" | wc -l`
if [ $NUM -gt 0 ]; then
failure $" shutdown"
echo
ps -ef | grep $prog | grep -v "grep" | grep -v
"service" | grep -v "init.d"
echo
else
[ "$RC" -eq 0 ] && failure $"$base shutdown" ||
success $"$base shutdown"
fi
[ "$RC" -eq 0 ] && failure $"$base shutdown" || success
$"$base shutdown"
RC=$((! $RC))
# use specified level only
else
if checkpid $pid; then
kill $killlevel $pid >/dev/null 2>&1
RC=$?
[ "$RC" -eq 0 ] && success $"$base $killlevel"
|| failure $"$base $killlevel"
fi
fi
else
failure $"$base shutdown"
RC=1
fi
# Remove pid file if any.
if [ "$notset" = "1" ]; then
rm -f $pidfile
fi
return $RC
}
________________________________________
From: Vinay Purohit [mailto:[EMAIL PROTECTED]
Sent: Friday, May 02, 2008 1:58 PM
To: [email protected]; [email protected]
Subject: RE: [EMAIL PROTECTED] RE:How to start apache daemon in apache 2.2.8 on
RHEL 5.1
Thanks Jet !! Is it effectively different apache virtual running as a different
daemon which can be started and stoped without affecting others ? Is it same as
running IP based virtual server (apache3.3.8 service/daemon) on windows ?
\Vinay
________________________________________
From: Wilda, Jet [mailto:[EMAIL PROTECTED]
Sent: Fri 5/2/2008 11:15 PM
To: [email protected]
Subject: RE: [EMAIL PROTECTED] RE:How to start apache daemon in apache 2.2.8 on
RHEL 5.1 Hi,
We run multiple Apache httpd instances on Red hat all with different
server roots and here is how we do it (I hope this is what your asking,-).
Below are the steps we do to create a new server root and binary (or symlink of
a new binary to the old). $ORIG_APACHE=httpd and $NEW_APACHE=whatever_you_want
and $BINDIR=/usr/sbin.
OLD_CONF=$ETC/$ORIG_APACHE
NEW_LOG=$APPLOG/$NEW_APACHE
NEW_CONF=$ETC/$NEW_APACHE
# create the new directory for the configuration files mkdir $ETC/$NEW_APACHE
# create a logging directory
mkdir $NEW_LOG
# OK, now build out the configuration directory ln -s $NEW_LOG $NEW_CONF/logs
ln -s /usr/lib/$ORIG_APACHE/modules $NEW_CONF/modules ln -s $VAR/run
$NEW_CONF/run
# link in a new executable
ln -s $BINDIR/$BINNAME $BINDIR/$NEWBINNAME
# copy in the configuration files
mkdir $NEW_CONF/conf
cp -Rp $OLD_CONF/conf/* $NEW_CONF/conf/
# make modifications to the configuration files sed -e
"s/$ORIG_APACHE\.pid/$NEW_APACHE\.worker\.pid/g" \
-e "s/\/$ORIG_APACHE/\/$NEW_APACHE/g" --in-place $NEW_CONF/conf/httpd.conf
# copy in the subordinate configuration files mkdir $NEW_CONF/conf.d cp -Rp
$OLD_CONF/conf.d/* $NEW_CONF/conf.d/
# add 2 lines into /etc/sysconfig/$NEW_APACHE echo
"HTTPD=/usr/sbin/$NEWBINNAME" >> $ETC/sysconfig/$NEW_APACHE echo "OPTIONS=\"-d
$ETC/$NEW_APACHE\"" >> $ETC/sysconfig/$NEW_APACHE
# Copy the rc start script
cp $ETC/init.d/$ORIG_APACHE $ETC/init.d/$NEW_APACHE
#Add the the automatic startup scripts and set to start on boot chkconfig --add
$NEW_APACHE chkconfig $NEW_APACHE on
Then just edit the $ETC/$NEW_APACHE/conf/httpd.conf and/or the
$ETC/$NEW_APACHE/conf.d/ssl.conf and as root 'service $NEW_APACHE start'. NOTE
this assumes that you are using the default structure that Red Hat lays it's
Apache httpd down as.
One thing to NOTE is that we had to over-ride the killproc function in
'/etc/init.d/functions' because of the way it tries to find the pid of what is
running. Since we symlink the binarys it would kill all the running apache
instances.
Hope that helps :-)
~Jet
-----Original Message-----
From: Eric Covener [mailto:[EMAIL PROTECTED]
Sent: Friday, May 02, 2008 11:26 AM
To: [email protected]
Subject: Re: [EMAIL PROTECTED] RE:How to start apache daemon in apache 2.2.8 on
RHEL 5.1
On Fri, May 2, 2008 at 10:12 AM, Vinay Purohit <[EMAIL PROTECTED]> wrote:
> Thanks Eric :-)
>
> Can you please provide little more detail on this. Precisely, I want
to
> run multiple httpd based on the httpd.conf supplied as start
parameter.
Create a set of init scripts based on the one supplied by redhat, and modify
the invocation of apachectl or httpd within the script to pass different -f
parameters.
--
Eric Covener
[EMAIL PROTECTED]
---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: [EMAIL PROTECTED]
" from the digest: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
----------
Learn more about Chase Paymentech Solutions,LLC payment processing services at
www.chasepaymentech.com.
THIS MESSAGE IS CONFIDENTIAL. This e-mail message and any attachments are
proprietary and confidential information intended only for the use of the
recipient(s) named above. If you are not the intended recipient, you may not
print, distribute, or copy this message or any attachments. If you have
received this communication in error, please notify the sender by return e-mail
and delete this message and any attachments from your computer.
---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: [EMAIL PROTECTED]
" from the digest: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
----------
Learn more about Chase Paymentech Solutions,LLC payment processing services at
www.chasepaymentech.com.
THIS MESSAGE IS CONFIDENTIAL. This e-mail message and any attachments are
proprietary and confidential information intended only for the use of the
recipient(s) named above. If you are not the intended recipient, you may not
print, distribute, or copy this message or any attachments. If you have
received this communication in error, please notify the sender by return e-mail
and delete this message and any attachments from your computer.
---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: [EMAIL PROTECTED]
" from the digest: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: [EMAIL PROTECTED]
" from the digest: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
