Hi :) Yes :) Good point. That might be a good stepping-stone towards the goal. Is there a machine you could use as a desktop/client machine and set-up either; 1. a dual-boot so that you can have a nice gui desktop to see how things work 2. a virtual machine (VirtualBox tends to be in the repos of most distros and is plenty good enough for experimenting with odd things) 3. a "LiveUsb" session (or Cd or Dvd) 4. just a different machine, such as a netbook or old machine rescued from a cupboard or basement or attic or skip or something.
Most nice gui distros have LibreOffice installed by default these days. Some of the extremely light ones, such as SliTaz, can add it fairly easily - even to a LIveCd session (as long as you don't bother to try to fully update the entire distro for this 'quick' test). Also many distros can run on 'really old' machines that other people kinda stop using but never quite seem to throw away completely. Regards from Tom :) On 13 March 2015 at 23:45, Tim Lloyd <[email protected]> wrote: > Hi, > > I notice you are using Arch linux. Is this why you are building rather > than just installing from the repos? > > Would it be easier to try a different distro (I use fedora but there are a > number of people using Ubuntu/Mint) and establish whether the same problems > occur? IE. take out the uncertainty of building? > > cheers > > > On 14/03/15 09:05, fdong wrote: > >> I built the package with debug enable. and I got more warning message when >> running the command. >> >> I built the package with debug enable; Here is the log I got (more than >> release build). I don't know whether it is helpful to find the issue. >> >> ./soffice --headless --convert-to pdf onebyte.txt >> warn:configmgr:17250:1:configmgr/source/xcuparser.cxx:300: unknown >> component >> "org.openoffice.Office.UI.DbReportWindowState" in >> "file:///ssd/b/home/fuchun/libreoffice/libreoffice_ >> source/instdir/program/../share/registry/res/registry_en-US.xcd" >> warn:configmgr:17250:1:configmgr/source/xcuparser.cxx:300: unknown >> component >> "org.openoffice.Office.UI.ReportCommands" in >> "file:///ssd/b/home/fuchun/libreoffice/libreoffice_ >> source/instdir/program/../share/registry/res/registry_en-US.xcd" >> warn:configmgr:17250:1:configmgr/source/xcuparser.cxx:912: ignoring >> modify >> of unknown set member node "StarOffice XML (Base) Report" in >> "file:///ssd/b/home/fuchun/libreoffice/libreoffice_ >> source/instdir/program/../share/registry/res/fcfg_langpack_en-US.xcd" >> warn:configmgr:17250:1:configmgr/source/xcuparser.cxx:912: ignoring >> modify >> of unknown set member node "StarOffice XML (Base) Report Chart" in >> "file:///ssd/b/home/fuchun/libreoffice/libreoffice_ >> source/instdir/program/../share/registry/res/fcfg_langpack_en-US.xcd" >> warn:desktop.deployment:17250:1:desktop/source/deployment/ >> manager/dp_manager.cxx:1421: >> Could not read file >> file:///ssd/b/home/fuchun/libreoffice/libreoffice_ >> source/instdir/program/../share/extensions/dict-gd/LICENSES-en.txt >> warn:configmgr:17364:1:configmgr/source/xcuparser.cxx:300: unknown >> component >> "org.openoffice.Office.UI.DbReportWindowState" in >> "file:///ssd/b/home/fuchun/libreoffice/libreoffice_ >> source/instdir/program/../share/registry/res/registry_en-US.xcd" >> warn:configmgr:17364:1:configmgr/source/xcuparser.cxx:300: unknown >> component >> "org.openoffice.Office.UI.ReportCommands" in >> "file:///ssd/b/home/fuchun/libreoffice/libreoffice_ >> source/instdir/program/../share/registry/res/registry_en-US.xcd" >> warn:configmgr:17364:1:configmgr/source/xcuparser.cxx:912: ignoring >> modify >> of unknown set member node "StarOffice XML (Base) Report" in >> "file:///ssd/b/home/fuchun/libreoffice/libreoffice_ >> source/instdir/program/../share/registry/res/fcfg_langpack_en-US.xcd" >> warn:configmgr:17364:1:configmgr/source/xcuparser.cxx:912: ignoring >> modify >> of unknown set member node "StarOffice XML (Base) Report Chart" in >> "file:///ssd/b/home/fuchun/libreoffice/libreoffice_ >> source/instdir/program/../share/registry/res/fcfg_langpack_en-US.xcd" >> convert >> /ssd/b/home/fuchun/libreoffice/libreoffice_source/instdir/program/ >> onebyte.txt >> -> >> /ssd/b/home/fuchun/libreoffice/libreoffice_source/instdir/program/ >> onebyte.pdf >> using writer_pdf_Export >> >> I create one byte size file and run the command. and in return got a pdf >> file with size 3.5K. But the display is a single []. >> >> >> >> -- >> View this message in context: http://nabble.documentfoundation.org/pdf- >> file-consists-of-F-after-convert-from-doc-on-self- >> built-libreoffice-4-4-0-3-tp4143069p4143184.html >> Sent from the Users mailing list archive at Nabble.com. >> >> > > -- > To unsubscribe e-mail to: [email protected] > Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to- > unsubscribe/ > Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette > List archive: http://listarchives.libreoffice.org/global/users/ > All messages sent to this list will be publicly archived and cannot be > deleted > > -- To unsubscribe e-mail to: [email protected] Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted
