Yes, the problem does not exist when printing from a pdf file. The
problem exists only when printing directly to a printer from LO Writer.

On Tue, 2014-07-15 at 07:00 +1200, Steve Edmonds wrote:
> Hi.
> I had this in opensuse 12.2. In File>print or printer settings under 
> device you can choose to output in PDF or postscript.
> PDF was the default and caused me problems, changing to postscript fixed it.
> steve
> On 2014-07-15 06:54, Harvey Nimmo wrote:
> > Thanks for your reply, Tom. My OS is OpenSuse 13.1 (Linux).
> >
> > Yes, there was a mismatch between one of my printers and its default
> > setting in the OS. Oddly, this may account for the 'font' error where
> > some characters in the pdf file were printed wrongly. I corrected the
> > default format for that printer and the 'print to file' error seems to
> > have been corrected (explain that one!).
> >
> > But...the basic problem persists: that printing the page(s) directly
> > from LO Writer (whether I print the 2-page document (with its page break
> > switch) or just the landscape page alone with the printer set to
> > landscape from the start) always renders the landscape page in portrait
> > (on both printers).
> >
> > Can't find the knob to turn...many pages and much ink later ;-(
> >
> >   
> >
> > On Mon, 2014-07-14 at 18:47 +0100, Tom Davies wrote:
> >> Hi :)
> >> Most printers seem to be hard-coded to leave a 4-5mm "white-space"
> >> border at the edge of pages so if you encroach into that then you'll
> >> lose some of what you are printing.  The Pdf route probably attempts
> >> to shrink the whole image a little to account for that.
> >>
> >>
> >> If LO is set to A4 but the Operating System is set to "US Letter" that
> >> might explain some of the other issues.  Err, or the other way
> >> around.
> >>
> >>
> >> Are you using Xp or Win8 or Ubuntu or Mac or which OS?  Knowing that
> >> might help others here to set-up the right configs in that and in LO.
> >> Do other documents (or the same ones) have problems in other programs?
> >> LO does seem to have something odd about it's printing configs but
> >> hopefully people here can help!
> >>
> >>
> >> Good luck and regards from
> >> Tom :)
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> On 14 July 2014 16:43, Harvey Nimmo <[email protected]> wrote:
> >>          
> >>          I apologise from the start if the subject of this thread has
> >>          already been
> >>          thrashed to death in this forum. I guess I pay detailed
> >>          attention to
> >>          what is going on only when it affects me directly!
> >>          
> >>          LO Version: 4.1.6.2 on OpenSuse 13.1
> >>          
> >>          I want to print a two-page A4 document, the first page being
> >>          portrait
> >>          the second landscape. The pages are separated by a page break
> >>          so that LO
> >>          Writer displays them properly. On printing these two pages I
> >>          face two
> >>          problems
> >>          1) the second (landscape) page is printed in portrait with the
> >>          text on
> >>          the right being cut off
> >>          
> >>          
> >>          In fact, the problem is even more primitive: it seems that LO
> >>          refuses to
> >>          print any page formatted in landscape.
> >>          
> >>          2) the page margins (default 2x2x2x2 cm) are not respected. At
> >>          least the
> >>          top margin is ignored (= 0 cm) on the printed page. The left
> >>          margin
> >>          seems OK, if a bit tight (=1.9 cm)
> >>          
> >>          
> >>          Two different printers (one Brother, one HP) both give me a
> >>          similar result,
> >>          confirm that the problem seems to lie with LO.
> >>          
> >>          If I print the document to a pdf file, the result looks
> >>          perfect on the
> >>          screen, and indeed, with respect to the two problems above,
> >>          even the
> >>          
> >>          printed result looks OK. However, since the characters printed
> >>          out on paper
> >>          are not all identical to those in the pdf file, depending on
> >>          the choice
> >>          
> >>          of font, I have decided to abandon the 'print to file
> >>          alternative' for
> >>          the time being, to concentrate on the direct printing variant.
> >>          
> >>          
> >>          Can anyone tell me what is going on in LO Writer and what the
> >>          solution
> >>          could be?
> >>          
> >>          Cheers
> >>          
> >>          Harvey
> >>          
> >>          
> >>          
> >>          
> >>          --
> >>          To unsubscribe e-mail to: users
> >>          [email protected]
> >>          Problems?
> >>          
> >> http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/
> >>          Posting guidelines + more:
> >>          http://wiki.documentfoundation.org/Netiquette
> >>          List archive:
> >>          http://listarchives.libreoffice.org/global/users/
> >>          All messages sent to this list will be publicly archived and
> >>          cannot be deleted
> >>          
> >>
> >>
> >
> >
> 



-- 
To unsubscribe e-mail to: [email protected]
Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/
Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette
List archive: http://listarchives.libreoffice.org/global/users/
All messages sent to this list will be publicly archived and cannot be deleted

Reply via email to