I think you need to add additional configuration to vm. Refer to https://www.shapeblue.com/cloudstack-feature-first-look-enable-sending-of-arbitrary-configuration-data-to-vms/
-Wei On Sunday, 12 February 2023, JeanPaul van der Mijle < [email protected]> wrote: > Hi all, > > Does anyone have a good guide on adding a PCI-E card (A Mellanox Connect-X > 5 VF interface) to cloudstack? > I had this all running before in stock Qemu, and all settings are still > present for the card and VF's, I just need to know how the management sees > that I have additional cards that I have available to assign to VMs. > > I tried adding: > pci.devices=100GE,81:00.2|100GE,81:00.3|100GE,81:00.4| > 100GE,81:00.5|100GE,81:00.6|100GE,81:00.7|100GE,81:01.0| > 100GE,81:01.1|100GE,c1:00.2|100GE,c1:00.3|100GE,c1:00.4| > 100GE,c1:00.5|100GE,c1:00.6|100GE,c1:00.7|100GE,c1:01.0|100GE,c1:01.1 > > However, after restarting the agent, I noticed that it added escape > characters: > pci.devices=100GE,81\:00.2|100GE,81\:00.3|100GE,81\:00.4| > 100GE,81\:00.5|100GE,81\:00.6|100GE,81\:00.7|100GE,81\:01.0| > 100GE,81\:01.1|100GE,c1\:00.2|100GE,c1\:00.3|100GE,c1\:00.4| > 100GE,c1\:00.5|100GE,c1\:00.6|100GE,c1\:00.7|100GE,c1\:01.0|100GE,c1\:01.1 > > Not sure if this is fine, but so far it was the only thing I could find > back on google, but this is 10 years ago. I suspect this is no longer > sufficient. > After restarting the agent, I do not see any changes unfortunately. > > Thanks! > > JeanPaul > >
