Hi, @Simon: There is a config (found in <https://cloudbase-init.readthedocs.io/en/latest/plugins.html#setting-password-main> https://cloudbase-init.readthedocs.io/en/latest/plugins.html#setting-password-main) called first_logon_behavior which you can set to 'no'. This will allow you to setup the password with no need to be reset after the first login. So this one was indeed a cloudbase-init "feature". I did test that and it works fine for me under MS Windows Server 2019.
What I get now is, that cloudbase-init allows me to set the password only once - so I can't reset it after the first launch of the instance. I did create an issue for this one but I believe that this was by design. Regards Liridon -----Original Message----- From: [email protected]<mailto:[email protected]> Reply-To: [email protected]<mailto:[email protected]> To: [email protected]<mailto:[email protected]> Subject: Re: Creating Windows Server 2019 templates with cloudbase init Date: Tue, 14 Jan 2020 13:43:04 +0000 Mailer: Roundcube Webmail/1.4-rc1 It's quite possible. I try to do the minimum where Windows is concerned, so I stopped at using the old CloudInstanceManager when I saw it's working. On 2020-01-14 13:28, <mailto:[email protected]> [email protected] wrote: Hi, I believe that having to set a new password after it has been reset is supposed to be a feature from Microsoft’s side. I’ve also noticed that login through RDP is disabled until a new password has been set. So far I haven’t been able to get it to work completely. (mainly due to time constraints) Regards Simon Völker Fraunhofer-Gesellschaft e.V. Schloss Birlinghoven 53754 Sankt Augustin Telefon: +49 2241 14-2311 E-mail: <mailto:[email protected]> [email protected] <mailto: <mailto:[email protected]> [email protected] > Am 14.01.2020 um 14:20 schrieb <mailto:[email protected]> [email protected] <mailto: <mailto:[email protected]> [email protected] >: Hi, This could be a bug (or undocumented feature, ahem) with cloudbase-init. Despite efforts I never got it to work reliably in the past, not sure about now. Have you tried using CloudInstanceManager.msi for setting the password? It still works for me. What I do is set up the template with a sysprep and unattend.xml where I also set a default password (perhaps this is what stops it from asking for new user pass), then on first boots CloudInstanceManager sets up the password without problems and resets work, too. SG zone btw. Lucian On 2020-01-14 12:53, Ismaili, Liridon (SWISS TXT) wrote: Hi Simon We are also building some new windows templates and would like to use cloudbase-init as you do. I get the same behavior as you did describe (after password reset it requires to setup a new password). How did you workaround this? I expect this to be a policy issue but would like to ask before I search to long as you had the same issue. Regards Liridon -----Original Message----- From: <mailto:[email protected]> [email protected] <mailto: <mailto:[email protected]> [email protected] ><mailto: <mailto:[email protected]> [email protected] > Reply-To: <mailto:[email protected]> [email protected] <mailto: <mailto:[email protected]> [email protected] ><mailto: <mailto:[email protected]> [email protected] > To: <mailto:[email protected]> [email protected] <mailto: <mailto:[email protected]> [email protected] ><mailto: <mailto:[email protected]> [email protected] > Subject: Re: Creating Windows Server 2019 templates with cloudbase init Date: Mon, 09 Sep 2019 07:54:02 +0000 Hi, we are using cloudplatform 4.11 which is based on cloudstack 4.10. Regards Simon Völker Fraunhofer-Gesellschaft e.V. Schloss Birlinghoven 53754 Sankt Augustin Telefon: +49 2241 14-2311 E-mail: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto:[email protected]> [email protected] > <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] Am 06.09.2019 um 15:34 schrieb Andrija Panic < <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] : That sounds like something that was happening on ACS 4.8. Which version are you running? Andrija On Fri, 6 Sep 2019 at 14:50, < <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] wrote: Hi, I’ve checked that and found something peculiar: The password is retrieved from the VPR if I do a password reset, reboot and reboot again. However, upon first login with the password generated by the reset, Windows requires a new password to be set. The password shows up in the passwords file on the vpr, but isn’t replaced by password=saved, it simply disappears when retrieved. Regards Simon Völker Fraunhofer-Gesellschaft e.V. Schloss Birlinghoven 53754 Sankt Augustin Telefon: +49 2241 14-2311 E-mail: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] Am 06.09.2019 um 11:23 schrieb Andrija Panic < <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] : Hi Simon, I assume that the cloudbased-init runs BEFORE the user has to set pass via Windows, thus overwriting the pass that ACS has previously set? Does rebooting the VM actually sets the new pass (from ACS), that was generated previously? You can actually check inside the VR /var/cache/cloud/password-<IP-ADDRESS-HERE> file - this file will contain the actual pass if it has NOT been fetched by the VM - or if it says "password=saved" - this means it was already fetched by the VM. Andrija On Fri, 6 Sep 2019 at 10:47, < <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] wrote: Hi, I am currently doing a new batch of our templates. So far we’ve been using Cloudbase-init for our Microsoft Server 2016 templates. Now with the 2019 version, instead of setting the password that cloudstack provides, the user has to set a password on first startup. Does someone have experience with Cloudbase-init and Windows Server 2019 or has faced the same issue? Regards Simon Völker Fraunhofer-Gesellschaft e.V. Schloss Birlinghoven 53754 Sankt Augustin Telefon: +49 2241 14-2311 E-mail: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] <mailto: <mailto: <mailto:[email protected]> [email protected] > <mailto:[email protected]> [email protected] -- Andrija Panić -- Andrija Panić
