Hello,
I have a very old problem, happening on each ACS version multiple basic
environments, why the iptables rules are deployed wrong, why with eth1 when
there is no IP on eth1? Each time I must create the rule manually:
This is what I see in iptables, normally I should see eth0
-A INPUT -i eth1 -p tcp -m tcp --dport 3922 -m state --state NEW,ESTABLISHED
-j ACCEPT
root@r-2705-VM:/etc/iptables# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP group default qlen 1000
link/ether 1e:00:52:00:00:33 brd ff:ff:ff:ff:ff:ff
inet 158.69.xx.xxx/28 brd 158.69.xx.xxx scope global eth0
valid_lft forever preferred_lft forever
inet 167.114.xx.xxx/28 brd 167.114.xx.xxx scope global eth0
valid_lft forever preferred_lft forever
inet 149.56.xx.xxx/27 brd 149.56.xxx.xxx scope global eth0
valid_lft forever preferred_lft forever
inet 192.99.xxx.xxx/26 brd 192.99.xxx.xxx scope global eth0
valid_lft forever preferred_lft forever
inet 198.50.xxx.xxx/27 brd 198.50.xxx.xxx scope global eth0
valid_lft forever preferred_lft forever
inet 149.56.xxx.xxx/27 brd 149.56.xxx.xxxscope global eth0
valid_lft forever preferred_lft forever
inet 144.217.xxx.xxx/27 brd 144.217.xxx.xxx scope global eth0
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether 02:00:57:15:02:01 brd ff:ff:ff:ff:ff:ff
root@r-2705-VM:/etc/iptables#
Regards,
Cristian
