Hi Benjamin, Take a look at a blog article I did a couple of years ago - it will give you a fair bit of background on how to configure KVM: https://www.shapeblue.com/networking-kvm-for-cloudstack/
A few pieces of advice: - Unless you have some very specific networking requirements don't use a separate VLAN for storage - just run with the default which will run secondary storage traffic over the management network. - Guest VLANs 2000-2699 - no problem - just make sure your top of rack switches can handle that amount of VLANs - most of them will do. Also keep in mind you need to run this on trunks - CloudStack manage the VLAN tagging for you. - Public VLANs: unless you plan to run a large amount of public networks you don't need such a big range - most organisations start with 1 public VLAN - iSCSI primary storage traffic is not managed by CloudStack - so all you need to do is make sure the KVM hosts can speak to your storage. Regards, Dag Sonstebo Cloud Architect ShapeBlue S: +44 20 3603 0540 | [email protected] | http://www.shapeblue.com <http://www.shapeblue.com/> | Twitter:@ShapeBlue <https://twitter.com/#!/shapeblue> On 27/04/2018, 10:17, "Benjamin Naber" <[email protected]> wrote: Hi together, currently we have a cloudstack 4.10 environment with Xenserver and the following network configuration: Physical (Bond) Interfaces: 1 management -> untagged vlan for management / tagged vlan 133 for secondary storage. 2 guest -> tagged vlans 2000-2699 3 public -> tagged vlans 200-250 4 ISCSI -> untagged I am now on eval for using KVM in this environment. I am also new to KVM. My question is how do i have to setup the cloud bridges for using this network layout on KVM. And How do i have to name the cloudbridges in KVM ? Kind regards Ben [email protected] www.shapeblue.com 53 Chandos Place, Covent Garden, London WC2N 4HSUK @shapeblue
