Hello Dag,
Thanks for your help,
Here the informations :
###### IP A RESULT #######
root@ASPRKVM06 network-scripts]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
MGMT state UP qlen 1000
link/ether 00:1b:78:2b:3a:de brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master
TRUNK state UP qlen 1000
link/ether 00:1b:78:2b:3a:df brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master MGMT portid
002481adfe90 state UP qlen 1000
link/ether 00:1b:78:2b:3a:de brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master TRUNK
portid 002481adfe94 state UP qlen 1000
link/ether 00:1b:78:2b:3a:df brd ff:ff:ff:ff:ff:ff
12: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state
DOWN qlen 1000
link/ether 52:54:00:41:c3:2f brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
13: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0
state DOWN qlen 1000
link/ether 52:54:00:41:c3:2f brd ff:ff:ff:ff:ff:ff
20: cloud0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UNKNOWN qlen 1000
link/ether 56:1e:58:2b:a4:95 brd ff:ff:ff:ff:ff:ff
inet 169.254.0.1/16 scope global cloud0
valid_lft forever preferred_lft forever
inet6 fe80::541e:58ff:fe2b:a495/64 scope link
valid_lft forever preferred_lft forever
39: TRUNK: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master
cloudbr1 state UP qlen 1000
link/ether 00:1b:78:2b:3a:df brd ff:ff:ff:ff:ff:ff
inet6 fe80::21b:78ff:fe2b:3adf/64 scope link
valid_lft forever preferred_lft forever
40: TRUNK103@TRUNK: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master cloudbr1.103 state UP qlen 1000
link/ether 00:1b:78:2b:3a:df brd ff:ff:ff:ff:ff:ff
41: cloudbr1.103: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP qlen 1000
link/ether 00:1b:78:2b:3a:df brd ff:ff:ff:ff:ff:ff
inet 172.16.3.216/24 brd 172.16.3.255 scope global cloudbr1.103
valid_lft forever preferred_lft forever
inet6 fe80::21b:78ff:fe2b:3adf/64 scope link
valid_lft forever preferred_lft forever
42: cloudbr1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
qlen 1000
link/ether 00:1b:78:2b:3a:df brd ff:ff:ff:ff:ff:ff
inet6 fe80::21b:78ff:fe2b:3adf/64 scope link
valid_lft forever preferred_lft forever
45: cloudbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
qlen 1000
link/ether 00:1b:78:2b:3a:de brd ff:ff:ff:ff:ff:ff
inet 172.16.22.216/24 brd 172.16.22.255 scope global cloudbr0
valid_lft forever preferred_lft forever
inet6 fe80::21b:78ff:fe2b:3ade/64 scope link
valid_lft forever preferred_lft forever
46: MGMT: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master
cloudbr0 state UP qlen 1000
link/ether 00:1b:78:2b:3a:de brd ff:ff:ff:ff:ff:ff
inet6 fe80::21b:78ff:fe2b:3ade/64 scope link
valid_lft forever preferred_lft forever
########## IFCFG-ETH0 ############
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
NAME=eth0
UUID=e5963b4d-e144-4ed0-a296-b16bd4cc2639
DEVICE=eth0
ONBOOT=yes
########### IFCFG-ETH2 ############
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
NAME=eth2
UUID=b980b62e-b344-4b47-8d25-7add6a28491a
DEVICE=eth2
ONBOOT=yes
########### IFCFG-team-MGMT ############
DEVICE=MGMT
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
NAME=team-MGMT
UUID=4a09cf80-ab72-47e5-adb1-422c6fc86f9f
ONBOOT=yes
DEVICETYPE=Team
BRIDGE=cloudbr0
######## IFCFG-cloudbr0 ###########
DEVICE=cloudbr0
STP=no
BRIDGING_OPTS=priority=32768
TYPE=Bridge
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
NAME=cloudbr0
UUID=90063d32-2e8c-4eac-8917-4b5c3d6d2fd7
ONBOOT=yes
IPADDR=172.16.22.216
NETMASK=255.255.255.0
GATEWAY=172.16.22.254
DNS1=8.8.8.8
######## BRCTL SHOW #######
bridge name bridge id STP enabled interfaces
cloud0 8000.000000000000 no
cloudbr0 8000.001b782b3ade no MGMT
cloudbr1 8000.001b782b3adf no TRUNK
cloudbr1.103 8000.001b782b3adf no TRUNK103
virbr0 8000.52540041c32f yes virbr0-nic
For information, i used nmcli command to configure the networking.
nmcli connection add type team ifname MGMT
nmcli con add type ethernet con-name MGMT-port1 ifname eth0 master MGMT
nmcli con add type ethernet con-name MGMT-port2 ifname eth2 master MGMT
nmcli conn add type bridge con-name cloudbr0 ifname cloudbr0
all device are up and connected
Best regards,
N.B
________________________________
De : Dag Sonstebo <[email protected]>
Envoyé : mardi 6 février 2018 10:26
À : [email protected]
Objet : Re: host KVM unable to find cloudbr0
Hi Nicolas,
OK I’m with you. Sounds like you have an underlying network issue on your KVM
host.
Can you post up an ifconfig / ip a from your KVM host?
Can you also post up the contents of the ifcfg-eth0 + ifcfg-eth1 as well as as
ifcfg-<team or bond0> and ifcfg-cloudbr0?
Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
On 05/02/2018, 20:06, "Nicolas Bouige" <[email protected]> wrote:
Hello Dag and Andrija,
Thanks for your answer,
@Andrija, we are using advanced zone and yes, we have specified the
traffics label and the agent on the host has retrieved the informations.
@Dag, its the documentation i followed, just, instead of bond i used team
NIC.
Best regards,
N.B
________________________________
De : Dag Sonstebo <[email protected]>
Envoyé : lundi 5 février 2018 20:01:17
À : [email protected]
Objet : Re: host KVM unable to find cloudbr0
Hi Nicolas,
Take a look at the following blog article – it’s a couple of years old but
should still be valid:
http://www.shapeblue.com/networking-kvm-for-cloudstack/
Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
On 05/02/2018, 18:51, "Andrija Panic" <[email protected]> wrote:
Hi Nicolas,
what does your zone networking look like ?
For every network you setup in the Zone (are you using advanced zones,
vlan
isolation method ???) you need to specify "KVM traffic label" - this
actually tells ACS what parent interface to look for...
Cheers
[email protected]
www.shapeblue.com<http://www.shapeblue.com>
53 Chandos Place, Covent Garden, London WC2N 4HSUK
@shapeblue
[email protected]
www.shapeblue.com<http://www.shapeblue.com>
[http://www.shapeblue.com/wp-content/uploads/2017/06/logo.png]<http://www.shapeblue.com/>
Shapeblue - The CloudStack Company<http://www.shapeblue.com/>
www.shapeblue.com
Rapid deployment framework for Apache CloudStack IaaS Clouds. CSForge is a
framework developed by ShapeBlue to deliver the rapid deployment of a
standardised ...
53 Chandos Place, Covent Garden, London WC2N 4HSUK
@shapeblue
On 5 February 2018 at 18:12, Nicolas Bouige <[email protected]> wrote:
> To complete my previous mail:
>
>
> we are running KVM on CentOS7
>
>
> Here the exact error message from the cloudstack GUI :
>
> incorrect Network setup on agentReinitialize agent after network
names are
> setupdetails : Can not find network: cloudbr0
>
> ________________________________
> De : Nicolas Bouige <[email protected]>
> Envoyé : lundi 5 février 2018 18:02:19
> À : [email protected]
> Objet : host KVM unable to find cloudbr0
>
> Hello all,
>
>
> As a lot of people, we are trying to switch our hypervisor and so our
> cloudstack platform from Xenserver to KVM.
>
>
> And we dont have a lot of experience with the duo cloudstack/KVM, we
are
> facing some issues and one of them is about the network.
>
> In the official documentation we have to create two bridges called
> cloudbr0 and cloudbr1.
>
> That's what we did.
>
>
> eth0/eth1 --> teamed NIC (mgmt) --> cloudbr0
>
> eth2/eth3 --> teamed NIC (trunk) --> cloudbr1
>
>
> we add a vlan on teamed NIC (trunk) with the id of the storage
network.
>
> --> teamed NIC (trunk) --> trunk103 (vlan 103) --> cloudbr1.103
>
>
> The configuration sound good, we can ping each host/storage and web.
>
> cloudbr0 is configured with an IP address and cloudbr1.103 as well.
>
>
> During zone configuration we have added cloudbr0 for admin traffic
and
> cloudbr1 for storage/guest/public.
>
>
> We are able to add the host and the agent get all the informations
needed :
>
> guest.network.device=cloudbr1
>
> workers=5
> private.network.device=cloudbr0
> port=8250
> resource=com.cloud.hypervisor.kvm.resource.LibvirtComputingResource
> pod=2
> zone=2
> hypervisor.type=kvm
> guid=6ce7dedb-0b21-31ed-b7f8-4141613c0946
> public.network.device=cloudbr1
> cluster=3
> local.storage.uuid=dbd798f9-b7ca-4022-943d-9dd2cd8b2bfa
> domr.scripts.dir=scripts/network/domr/kvm
> LibvirtComputingResource.id=0
> host=XXX.XXX.XXX.XXX
>
>
> network cloud0 has been created automatically.
>
> For information, we have followed this ticket as well but nothing
changed.
>
> https://issues.apache.org/jira/browse/CLOUDSTACK-8838
[KVM] agent setup failed when physical interface name is
...<https://issues.apache.org/jira/browse/CLOUDSTACK-8838>
issues.apache.org
[KVM] agent setup failed when physical interface name is in ensX format
(CentOS7) My environment: CloudStack 4.5.2
(http://packages.shapeblue.com/cloudstack/upstream ...
>
>
> i guess i misunderstood something during the network configuration
but i'm
> running out of idea.
>
>
> Any help will be appreciated ;)
>
>
> Have a great day,
>
> Best regards,
>
>
> N.B
>
>
>
--
Andrija Panić
