you mean, xenbr0, xebr1, xenapi0 xenapi1?
On Tue, May 6, 2014 at 9:39 AM, Andrija Panic <[email protected]>wrote: > Label should be exactly the name of your bridges - you don't use eth0, you > join eth0 to new bridge... > Labels define in what bridge to plug virtual NIC of your VM... > Cheers > > > > On 6 May 2014 14:32, Владислав Старков <[email protected]> > wrote: > > > Say, I use eth0 for management & secondary storage traffic. No VLANs > > there. Eth0 directly connected to access-port on L2 switch. (Access > > port means no VLAN ethernet frames is being emitted from this port). > > > > Should I use "eth0" as a label for both Management traffic and Storage > > traffic when I configure Physical interfaces in CloudStack WEB UI? > > > > (general question is what is "label" here?) > > > > > > On Tue, May 6, 2014 at 4:16 PM, Владислав Старков > > <[email protected]> wrote: > > > Hi everyone, > > > > > > I have successfully installed CloudStack management server and NFS > > > server for primary and secondary storage. > > > > > > I'm in doubt about how to configure Zone1. > > > > > > Let's separate my first long letter with multiple small questions. > > > > > > Question: > > > > > > If I have 2 NICs on my host, is it possible to use first NIC for > > > management & secondary storage traffic, and second NIC for both public > > > (VLAN 10) and guest traffic (VLAN 20)? > > > > > > Thanks. > > > > > > > > > On Wed, Apr 23, 2014 at 5:13 AM, Amin Samir <[email protected]> > > wrote: > > >> Hello, > > >> > > >> I am not sure if 14.04 LTS is supported check out the installation > > link, I propose to use it with LTS 12.04 very easy link is enclosed. > > >> > > >> > > > http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/latest/installation.html > > >> > > >> > > > http://www.greenhills.co.uk/2013/08/30/cloudstack-single-server-on-ubuntu-with-kvm.html > > >> > > >> > > >> Kind Regards > > >> Amin > > >> > > >> -----Original Message----- > > >> From: Владислав Старков [mailto:[email protected]] > > >> Sent: Wednesday, 23 April 2014 1:26 AM > > >> To: [email protected] > > >> Subject: CloudStack 4.3 proper Advanced Network setup > > >> > > >> Hi there, > > >> > > >> I just installed CloudStack 4.3 on a single host ("all-in-one"). > > >> > > >> My host's setup: > > >> – Ubuntu 14.04 LTS 64bit > > >> – 6 1GbE NICs (3 in use and 3 not in use) – Primary storage on NFSv4 – > > Secondary storage on NFSv4 – KVM hypervisor only – Management server > > installed directly on this host (not on VM) > > >> > > >> My physical network setup: > > >> – 1 L2 switch with 3 different VLANs > > >> – VLAN 2 for NAS (Primary storage on NFSv4) – VLAN 10 for guests > public > > traffic (there lives public IP addresses) – VLAN 100 for management > traffic > > – VLAN 200 for guests traffic (there lives private IP addresses, so > guests > > from different clusters can interact with each other) > > >> > > >> cat /etc/network/interfaces: > > >> # This file describes the network interfaces available on your > system > > >> # and how to activate them. For more information, see interfaces(5). > > >> > > >> # The loopback network interface > > >> auto lo > > >> iface lo inet loopback > > >> > > >> # The primary network interface > > >> # CloudStack Primary storage traffic > > >> auto eth0 > > >> iface eth0 inet static > > >> address 10.10.10.11 > > >> netmask 255.255.255.0 > > >> network 10.10.10.0 > > >> broadcast 10.10.10.255 > > >> # dns-* options are implemented by the resolvconf package, if > > installed > > >> dns-nameservers 8.8.8.8 8.8.4.4 > > >> dns-search cloud.example.com > > >> > > >> # CloudStack Management traffic > > >> auto eth1 > > >> iface eth1 inet static > > >> address 10.10.12.2 > > >> netmask 255.255.255.0 > > >> network 10.10.12.0 > > >> broadcast 10.10.12.255 > > >> gateway 10.10.12.1 > > >> > > >> auto eth2 > > >> iface eth2 inet manual > > >> > > >> # CloudStack Public traffic > > >> auto cloudbr0 > > >> iface cloudbr0 inet manual > > >> bridge_ports eth2.10 > > >> bridge_fd 5 > > >> bridge_stp off > > >> bridge_maxwait 1 > > >> > > >> # CloudStack Guest traffic > > >> auto cloudbr1 > > >> iface cloudbr1 inet manual > > >> bridge_ports eth2.200 > > >> bridge_fd 5 > > >> bridge_stp off > > >> bridge_maxwait 1 > > >> > > >> auto eth3 > > >> iface eth3 inet manual > > >> up ifconfig $IFACE 0.0.0.0 up > > >> down ifconfig $IFACE down > > >> > > >> auto eth4 > > >> iface eth4 inet manual > > >> up ifconfig $IFACE 0.0.0.0 up > > >> down ifconfig $IFACE down > > >> > > >> auto eth5 > > >> iface eth5 inet manual > > >> up ifconfig $IFACE 0.0.0.0 up > > >> down ifconfig $IFACE down > > >> > > >> The approximate network setup schema is depicted here: > > >> http://cl.ly/image/3z2D0w370H1M/o > > >> > > >> While setting up the first zone in administrator's UI I've faced with > > difficulties in setting up my advanced network correctly. (For ex. > > >> I've got this error "Creating primary storage Something went wrong; > > please correct the following: zone wide storage pool is not supported for > > hypervisor type undefined", and so on) > > >> > > >> As I'm newbie to CloudStack and virtualization I'm not clear enough > for > > me how CloudStack network should be setup in case I use multiple NICs and > > multiple VLANs on L2 physical switch. > > >> > > >> Could someone point me how should be setup my network for Zone1 with > > respect to network schema as I showed above? > > >> > > >> For education purposes, lets say we will use these networks: > > >> – 77.12.34.0/24 (for Public) > > >> – 10.10.10.0/24 (for zone's NAS – primary & secondary storage) – > > 10.1.1.0/24 (for Guests VMs) – 10.10.12.0/24 (for management, if it > > required to be different subnet) > > >> > > >> As an answer to my question it would be awesome to get two things: > > >> > > >> 1) Content of /etc/network/interfaces (bridges and VLANs config in > > particular) > > >> > > >> 2) What should be entered on Step 3 – Setup Network (and substeps) in > > CloudStack Administrator's UI? > > >> > > >> Thanks in advance for helping! > > >> > > >> > > >> -- > > >> Vlad > > >> > > >> > > > > > > -- > > Andrija Panić > -------------------------------------- > http://admintweets.com > -------------------------------------- > -- Rafael Weingärtner
