Do you have any error messages in the log files that you can share?
Ron
On 07/08/2013 3:37 PM, Sarath Chandra wrote:
Hi All,
Thanks for your inputs. I have tried with the suggested changes but could
not get it working. I started from scratch again to see if it helps. But I
seem to be going wrong in some place.
Can some one kinldy go though the below setup and tell me if its right. I
am stuck since a week trying to get this running :(
I have the following setup:
Cloudstack Management Server
Port 20 of Switch (Trunk all + with necessary Vlans)
Hypervisor (Ubuntu + KVM)
Port 22 of Switch (Trunk all + with necessary Vlans)
I am thinking of having the following networks/sub-networks:
mgmt/public/private/storage - 172.16.10.0/24 network
Mangement
Server - 172.16.10.1, Hypervisor – 172.16.10.10
Public
172.16.10.20 - 172.16.10.30
Private (System VMs e.t.c)
172.16.10.31 - 172.16.10.200
Guest
10.1.1.0/24
*Server Side Configuration*
CloudStack Server:
eth0
Corporate lab ip (lets say 1.1.1.1)
eth1.3100
Subinterface of Eth1 with Vlan 3100, IP: 172.16.10.1
*Global settings*
system.vm.use.local.storage = true
*Zone Creation Wizard for Advanced Network
*
Name : Zone-1**
DNS1 : 8.8.8.8
Internal DNS1 : 8.8.8.8
Hypervisor : KVM
Guest CIDR = 10.1.1.0/24
Local Storage enabled = true
*Network Setup*
Physical Network 1 : Isolation Method Vlan
mgmt -- ???????? gave cloudbr0 (on the hypervisor, I have eth1.3100
assigned with IP 172.16.10.10 for mgmt traffic, cant add a bridge to it)
public -- cloudbr0
guest -- cloudbr1
*Public IP range
*
GW : 172.16.10.1/24 (ip of the CS server)
Vlan : 3200 (Public traffic Vlan)
IP range : 172.16.10.20 - 172.16.10.30
*POD*
GW : 172.16.10.1/24 (ip of the CS server)
IP Range (Private n/w) : 172.16.10.31 - 172.16.10.200
*Guest*
- Skipped Vlan range for guest traffic
*Cluster*
Name : Cluster-1
Hypervisor : KVM
*Host*
Name : Corporate Lab IP for Host (lets say 2.2.2.2)
username & password
*Primary Storage* : Gets skipped as I have selected local storage to true.
*Secondary Storage*
Provider : NFS
Name : SecondaryStorage-1
NFS Server : CS Server Corporate ip (1.1.1.1)
path : /mnt/secondary
*Hypervisor (Ubuntu 13.04 + KVM)*
eth0
Corporate Lab ip (2.2.2.2)
eth1.3100
172.16.10.10 GW: 172.16.10.1
eth1.3200
Added to bridge Cloudbr0
eth1.3300
Added to bridge Cloudbr1
Agent is setup properly and is able to communicate with the server.
*Is this configuration correct or am I missing something??*
I have seeded the SystemVM with the proper 4.2 templates as per Prasanna's
suggestion today. My Setup due to some reason is not able to start the
console proxy & SSVMs.
Thanks in advance for your suggestions.
regards,
Sarath
--
Ron Wheeler
President
Artifact Software Inc
email: [email protected]
skype: ronaldmwheeler
phone: 866-970-2435, ext 102
