I looked on page 2 of the ArtemisMQ_Cluster_Oct172024.pptx in the archive which you attached to your original email, but I found no questions. However, I see that you've added them in your response.
I find the questions and the configuration confusing. First, automatic discovery (e.g. via UDP) or static connectors can be used to form a cluster. You cannot, as far as I'm aware, use both simultaneously. Therefore, please choose one or the other. It's not clear why you would even try to use both. Second, you say that messages are not forwarded, but you don't describe the details of the use-case. For example, you make no mention of where messages are sent, where consumers are created, etc. Last, generally speaking it's best to start simple and add complexity once the desired functionality has been validated. In this case you're testing message load-balancing which requires multiple primary servers. It doesn't require any backups. It would be useful to simplify your configuration to eliminate any complexity that isn't absolutely required to reproduce the problem. In this case, you can drop your backups and simply focus on the two clustered primary servers. Justin On Thu, Oct 24, 2024 at 9:42 AM tin.m....@lmco.com <tin.m....@lmco.com> wrote: > Hi, > > Thanks for the name correction. > > The questions are on page 2 of the ArtemisMQ_Cluster_Oct172024.pptx, which > describes the configuration and the questions. They are listed here: > > ------ > Issue 1: > - UDN node and VM node all use Dynamic discovery > - Cluster connections were established > - Messages either were not forwarded by UDN node, or were not received by > VM node > - Succeeded ONLY after restarting the UDN Primary Server > > QUESTION 1: How to configure so that UDN node server would forward > messages to VM node server upon startup when all are using Dynamic > discovery? > > ------ > Issue 2: > UDN node uses Dynamic discovery , VM uses Static Connectors: > Added address name="PositionReport“, as shown below in attempt to forward > only PositionReport to VM node – but all messages still got forwarded > <address name="PositionReport"> > <anycast/> > </address> > > QUESTION 2: How to configure so that UDN node server would only forward > certain message, such as PositionReport, to VM node server? > > > Regards, > Tin (Tien) Lai > > > > -----Original Message----- > From: Justin Bertram <jbert...@apache.org> > Sent: Thursday, October 24, 2024 8:30 AM > To: users@activemq.apache.org > Subject: EXTERNAL: Re: Artemis MQ 2.36.0 Load Balancing questions > > Where are the actual questions? > > Also, the broker is named "ActiveMQ Artemis," not "ArtemisMQ." > > > Justin > > On Wed, Oct 23, 2024 at 3:01 PM tin.m....@lmco.com <tin.m....@lmco.com> > wrote: > > > Hi, > > > > > > > > Attached is a zip file describing the configuration and the questions > > I have with Load Balancing. Let me know if I need to provide any > > additional information. > > > > > > > > Regards, > > > > Tin (Tien) Lai > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: users-unsubscr...@activemq.apache.org > > For additional commands, e-mail: users-h...@activemq.apache.org For > > further information, visit: https://activemq.apache.org/contact > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: users-unsubscr...@activemq.apache.org > For additional commands, e-mail: users-h...@activemq.apache.org > For further information, visit: https://activemq.apache.org/contact > >
