Yup, I'm getting the same thing w/my JNDI producer. However, my consumer has
no problem. Perhaps a JIRA is in order ;)
Joe
Tom Purcell wrote:
>
> Joe
>
> Thanks for the follow up. I'm almost where I need to be. I made one
> change. I upgraded from AMQ 5.0 to AMQ 5.1. The SecurityException went
> away and AMQ came up clean. But I'm still have a problem and I think it
> has more to do with my client code than AMQ itself. That is I'm not sure
> how to connect.
>
> When I use dynamic queues my code is straightforward:
> requestQueue = queueSession.createQueue("Wile.Jms.Queue.Query.Asset");
> queueSender = queueSession.createSender(requestQueue);
>
> Now that I'm predefining the queues the user that is trying to send to the
> queue does not have admin access and therefore cannot create a queue. In
> fact I don't want that user to create one. I want that user to use the one
> that was created at start up via the AMQ xml configuration
> (<destinations>). The problem is with the above code AMQ throws an
> exception:
> java.lang.SecurityException: User queryuser is not authorized to create:
> queue://Wile.Jms.Queue.Query.Asset
>
> I see why I cannot use createQueue so I'm trying to figure out how to
> "findQueue" and it appears the only way is via JNDI. So I tried this:
> Queue queue = (Queue)jndiContext.lookup("Wile.Jms.Queue.Query.Asset") ;
> queueSender = queueSession.createSender(queue);
>
> And I get:
> java.lang.SecurityException: User queryuser is not authorized to create:
> queue://Wile.Jms.Queue.Query.Asset
>
> So I'm not sure how to connect to a predefined queue. Can you point me at
> an example?
>
> Thanks
> Tom
>
>
> ttmdev wrote:
>>
>> FWIW, I have dropped your configuration into my setup (AMQ 5.1, JDK
>> 1.5.0_06-b05, Windoze XP Pro)
>> and have not encountered your problem. I have used both
>> jaasAuthenticationPlugin and simpleAuthenticationPlugin.
>>
>> Joe
>>
>>
>>
>> Tom Purcell wrote:
>>>
>>> Hello
>>> I'm trying to get the ActiveMQ authorizationPlugin to work. I'm
>>> using the basic jaasAuthenticationPlugin configuration="activemq-domain"
>>> properties logon. My activemq.xml, login.conf, users.properties and
>>> groups.properties are all in my <AMQ_HOME>/conf directory. My
>>> activmq.xml is only slightly different for the example on the site. I
>>> have removed jetty, camel and the commandAgent. I'm running AMQ 5.0.0 on
>>> JDK 1.5.0_14-b03. I delete <AMQ_HOME>/data/localhost between each run to
>>> make sure I come up clean. Everything works... up to a point.
>>>
>>> If I run without any defined destinations (queues or topics)
>>> everything works. Users with authority can access the dynamically
>>> created queues. Bad users and bad passwords fail.
>>>
>>> The problem is I need to run with defined destinations. When I add
>>> the following to my activemq.xml:
>>> <destinations>
>>> <queue physicalName="wileJmsQueryQueue"/>
>>> </destinations>
>>>
>>> I get the following in the log:
>>> 14:11:50,731 | DEBUG | ActiveMQ Journal Checkpoint Worker |
>>> AMQPersistenceAdapter | tore.amq.AMQPersistenceAdapter 322 |
>>> Checkpoint started.
>>> 14:11:50,733 | DEBUG | ActiveMQ Journal Checkpoint Worker |
>>> AMQPersistenceAdapter | tore.amq.AMQPersistenceAdapter 354 |
>>> Checkpoint done.
>>> 14:11:50,921 | DEBUG | main | AbstractRegion |
>>> q.broker.region.AbstractRegion 112 | Adding destination:
>>> queue://wileJmsQueryQueue
>>> 14:11:50,923 | INFO | main | KahaStore |
>>> e.activemq.kaha.impl.KahaStore 448 | Kaha Store using data directory
>>> /data/apache-activemq-5.0.0/data/localhost/kr-store/data
>>> 14:11:50,986 | DEBUG | Checkpoint: queue://wileJmsQueryQueue |
>>> AMQMessageStore | vemq.store.amq.AMQMessageStore 328 | Doing
>>> batch update... adding: 0 removing: 0
>>> 14:11:50,987 | DEBUG | Checkpoint: queue://wileJmsQueryQueue |
>>> AMQMessageStore | vemq.store.amq.AMQMessageStore 366 | Batch
>>> update done.
>>> 14:11:50,993 | DEBUG | main | AMQMessageStore |
>>> vemq.store.amq.AMQMessageStore 266 | flush starting ...
>>> 14:11:51,014 | DEBUG | main | AbstractRegion |
>>> q.broker.region.AbstractRegion 112 | Adding destination:
>>> topic://ActiveMQ.Advisory.Queue
>>> 14:11:51,025 | INFO | main | BrokerService |
>>> .activemq.broker.BrokerService 413 | Using Persistence Adapter:
>>> AMQPersistenceAdapter(/data/apache-activemq-5.0.0/data/localhost)
>>> 14:11:51,029 | DEBUG | main | AMQMessageStore |
>>> vemq.store.amq.AMQMessageStore 266 | flush starting ...
>>> 14:11:51,030 | ERROR | main | BrokerService |
>>> .activemq.broker.BrokerService 439 | Failed to start ActiveMQ JMS
>>> Message Broker. Reason: java.lang.SecurityException: User is not
>>> authenticated.
>>> java.lang.SecurityException: User is not authenticated.
>>> at
>>> org.apache.activemq.security.AuthorizationBroker.addDestination(AuthorizationBroker.java:52)
>>> at
>>> org.apache.activemq.broker.MutableBrokerFilter.addDestination(MutableBrokerFilter.java:151)
>>> at
>>> org.apache.activemq.broker.region.AbstractRegion.start(AbstractRegion.java:93)
>>> at
>>> org.apache.activemq.broker.region.RegionBroker.start(RegionBroker.java:182)
>>> at
>>> org.apache.activemq.broker.jmx.ManagedRegionBroker.start(ManagedRegionBroker.java:103)
>>> at
>>> org.apache.activemq.broker.TransactionBroker.start(TransactionBroker.java:112)
>>> at
>>> org.apache.activemq.broker.BrokerFilter.start(BrokerFilter.java:153)
>>> at
>>> org.apache.activemq.broker.BrokerFilter.start(BrokerFilter.java:153)
>>> at
>>> org.apache.activemq.broker.BrokerFilter.start(BrokerFilter.java:153)
>>> at
>>> org.apache.activemq.broker.BrokerFilter.start(BrokerFilter.java:153)
>>> at
>>> org.apache.activemq.broker.MutableBrokerFilter.start(MutableBrokerFilter.java:163)
>>> at
>>> org.apache.activemq.broker.BrokerService.start(BrokerService.java:422)
>>> at
>>> org.apache.activemq.xbean.XBeanBrokerService.afterPropertiesSet(XBeanBrokerService.java:46)
>>> at
>>> org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1201)
>>> at
>>> org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1171)
>>> at
>>> org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:425)
>>> at
>>> org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:251)
>>> at
>>> org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:156)
>>> at
>>> org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:248)
>>> at
>>> org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:160)
>>> at
>>> org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:287)
>>> at
>>> org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:352)
>>> at
>>> org.apache.xbean.spring.context.ResourceXmlApplicationContext.<init>(ResourceXmlApplicationContext.java:64)
>>> at
>>> org.apache.xbean.spring.context.ResourceXmlApplicationContext.<init>(ResourceXmlApplicationContext.java:52)
>>> at
>>> org.apache.activemq.xbean.XBeanBrokerFactory.createApplicationContext(XBeanBrokerFactory.java:91)
>>> at
>>> org.apache.activemq.xbean.XBeanBrokerFactory.createBroker(XBeanBrokerFactory.java:51)
>>> at
>>> org.apache.activemq.broker.BrokerFactory.createBroker(BrokerFactory.java:71)
>>> at
>>> org.apache.activemq.broker.BrokerFactory.createBroker(BrokerFactory.java:54)
>>> at
>>> org.apache.activemq.console.command.StartCommand.startBroker(StartCommand.java:112)
>>> at
>>> org.apache.activemq.console.command.StartCommand.runTask(StartCommand.java:74)
>>> at
>>> org.apache.activemq.console.command.AbstractCommand.execute(AbstractCommand.java:51)
>>> at
>>> org.apache.activemq.console.command.ShellCommand.runTask(ShellCommand.java:104)
>>> at
>>> org.apache.activemq.console.command.AbstractCommand.execute(AbstractCommand.java:51)
>>> at
>>> org.apache.activemq.console.command.ShellCommand.main(ShellCommand.java:76)
>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>>> at
>>> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>>> at
>>> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>>> at java.lang.reflect.Method.invoke(Method.java:585)
>>> at org.apache.activemq.console.Main.runTaskClass(Main.java:222)
>>> at org.apache.activemq.console.Main.main(Main.java:106)
>>> 14:11:51,033 | INFO | main | faultListableBeanFactory |
>>> t.DefaultSingletonBeanRegistry 285 | Destroying singletons in
>>> [EMAIL PROTECTED]:
>>> defining beans
>>> [org.springframework.beans.factory.config.PropertyPlaceholderConfigurer,org.apache.activemq.xbean.XBeanBrokerService];
>>> root of factory hierarchy
>>> 14:11:51,048 | INFO | ActiveMQ ShutdownHook | BrokerService
>>> | .activemq.broker.BrokerService 448 | ActiveMQ Message Broker
>>> (localhost, null) is shutting down
>>>
>>> Note that the broker shuts down.
>>>
>>> I've tried looking through some AMQ code and the xsd to see if I'm
>>> missing something in the configuration and I'm at a loss. My
>>> activemq.xml (with destinations) is below. Any thoughts will be
>>> appreciated.
>>>
>>> Thanks
>>> Tom
>>>
>>> <beans
>>> xmlns="http://www.springframework.org/schema/beans";
>>> xmlns:amq="http://activemq.org/config/1.0";
>>> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
>>> xsi:schemaLocation="http://www.springframework.org/schema/beans
>>> http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
>>> http://activemq.org/config/1.0
>>> http://activemq.apache.org/schema/activemq-core-5.0.0.xsd
>>> http://activemq.apache.org/camel/schema/spring
>>> http://activemq.apache.org/camel/schema/spring/camel-spring.xsd";>
>>>
>>> <!-- Allows us to use system properties as variables in this
>>> configuration file -->
>>> <bean
>>> class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer"/>
>>>
>>> <broker xmlns="http://activemq.org/config/1.0";
>>> brokerName="localhost" dataDirectory="${activemq.base}/data">
>>> <destinations>
>>> <queue physicalName="wileJmsQueryQueue"/>
>>> </destinations>
>>> <!-- The transport connectors ActiveMQ will listen to -->
>>> <transportConnectors>
>>> <transportConnector name="openwire"
>>> uri="tcp://localhost:61616" discoveryUri="multicast://default"/>
>>> <transportConnector name="ssl" uri="ssl://localhost:61617"/>
>>> <transportConnector name="stomp"
>>> uri="stomp://localhost:61613"/>
>>> <transportConnector name="xmpp"
>>> uri="xmpp://localhost:61222"/>
>>> </transportConnectors>
>>>
>>> <!-- The store and forward broker networks ActiveMQ will listen
>>> to -->
>>> <networkConnectors>
>>> <networkConnector name="default-nc"
>>> uri="multicast://default"/>
>>> </networkConnectors>
>>>
>>> <plugins>
>>> <!-- use JAAS to authenticate using the login.config file
>>> on the classpath to configure JAAS -->
>>> <jaasAuthenticationPlugin configuration="activemq-domain"/>
>>> <!-- lets configure a destination based authorization
>>> mechanism -->
>>> <authorizationPlugin>
>>> <map>
>>> <authorizationMap>
>>> <authorizationEntries>
>>> <authorizationEntry queue=">" read="all"
>>> write="all" admin="all"/>
>>> <authorizationEntry
>>> topic="ActiveMQ.Advisory.>" read="all" write="all" admin="all"/>
>>> </authorizationEntries>
>>> <tempDestinationAuthorizationEntry>
>>> <tempDestinationAuthorizationEntry
>>> read="all" write="all" admin="all"/>
>>> </tempDestinationAuthorizationEntry>
>>> </authorizationMap>
>>> </map>
>>> </authorizationPlugin>
>>> </plugins>
>>> </broker>
>>> </beans>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>
>
--
View this message in context:
http://www.nabble.com/Secutiry-and-Predefined-Destinations-tp17370190s2354p17442329.html
Sent from the ActiveMQ - User mailing list archive at Nabble.com.
