Pekny den.
uz istu chvilu sa potacam s jednym problemom
mam v serveri broadcom sietovky, ktore mi do istej doby fungovali ok. V
principe od verzie fbsd 8. a vymene switchu je ich spravanie dost zle.
Prvy a azkladny problem je v ich rychlosti. Nedokazu sa negociovat na
1Gb/s, stale len 100Mb/s. Negociacia je sprevadzana mnohymi problemami
vobec s nabehnutim adapteru.
je to stary server ibm x236
(http://www-07.ibm.com/systems/includes/content/x/pdf/xsd00360USEN.pdf)
V standardnej vybave servera su dve bge sietovky, ja som v snahe o
alternativne riesenie picol dalsi original ibm broadcom netextreme
adapter - bce
Switch na fruhom konci je Cisco Catalyst 2960G-TS-L a nechce sa mi
verit, ze chyba je v nom. Mam na nom aj ine ibm boxy s bge sietovkami a
tam sa to chyti na 1Gb/s v pohodicke.
Ak mate info, ktore by ma mohlo aspon nakopnut, kde hladat riesenie,
budem rad.
Dakujem
PeSe
Vypis ifconfig:
bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:14:5e:91:43:3a
media: Ethernet autoselect (none)
status: no carrier
bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:14:5e:91:43:3b
inet 172.27.27.10 netmask 0xffffff00 broadcast 172.27.27.255
media: Ethernet autoselect <flowcontrol> (none)
status: no carrier
bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
ether 00:10:18:42:72:14
inet 192.168.150.110 netmask 0xffffff80 broadcast 192.168.150.127
media: Ethernet autoselect <flowcontrol> (100baseTX
<full-duplex,flowcontrol,rxpause,txpause>)
status: active
--
---------
PeSe
---------
--
FreeBSD mailing list (users-l@freebsd.cz)
http://www.freebsd.cz/listserv/listinfo/users-l
