Am 18.11.2021 um 09:55 schrieb Tom Meierjürgen:
Am 18.11.2021 um 08:52 schrieb Maxim Solodovnik:
...(cut done stuff)
All i have to figure out now for my small 2 node cluster is why
the switch to another room on the other node still results in
seeing only my own stream but not the opponents (tested with 2
computers here in my lan and 2 others from another lan at same
time,after switch every computer has only its own streams
visible+hearable)...
Do you have TURN server?
Is it configured properly?
For sure i have one turnserver per node running ;-)
Heres my turnserver config stripped down to all lines without the
commented lines and personal information replaced by placeholders
which tells the kind of content, maybe i have forgoten something in there?
/etc/turnserver.conf :
######################Start#####################
listening-port=3478
listening-ip=$Docker-Bridge_Interface-IP$
listening-ip=$External-Node-IP$
listening-ip=$Internal-own-IPSEC/GRE-Tunnel-IP$
relay-ip=$Internal_own_IPSEC/GRE-Tunnel-IP$
min-port=49152
max-port=65535
fingerprint
use-auth-secret
static-auth-secret=$Same_secret_as_in_OM_Kurento-configurationpart_of_openmeetings.properties$
server-name=$Nameresolutionadress_of_the_node$
realm=$Domainame_as_Realm$
stale-nonce=0
log-file=/var/log/turnserver/turn.log
syslog
allowed-peer-ip=$Internal_other_nodes_IPSEC/GRE_Tunnel-IP$
allowed-peer-ip=$External_other_nodes_IP$
pidfile="/var/run/turnserver.pid"
###########################End################
when i put "lt-cred-mech" additionally in there as mentioned somewhere
in the mailinglist before, my coturn won´t start up and in the logs it
tells me to use either lt-cred-mech or use stat-auth but not both at
the same time...
Hope this helps locating the reasons for my Node-switching problem
with the streams...
Does anyone on the list have a hint for me if this config has something
in which may cause the Node-Switchingproblems?
kind regards,
Tom
