Hello! Julian Weiß <jul...@ch-weiss.de> schrieb am 26.04.20 um 20:22:27 Uhr:
> Hey there thanks for your reply. Tried it but no results Audio and video is > still missing. > The turnserver is working but only under sudo rights --- is that OK? netstat -pantu |grep turn What kind of firewall are you using and how does your network-structure look like? > And I found the log.. > WARNING: cannot find certificate file: turn_server_cert.pem (1) > 0: WARNING: cannot start TLS and DTLS listeners because certificate file is > not set properly > 0: WARNING: cannot find private key file: turn_server_pkey.pem (1) > 0: WARNING: cannot start TLS and DTLS listeners because private key file is > not set properly > Might it be possible, that this is the reason I can't get any audio or video. No, as far as I understand openmeetings uses a selfsigned certificate if you didn't configure it to use yours. Is openmeetings reachable with https? > I've tried letsencrypt but there themes to be a broken package so that I > can't create a ssl certificate any other ideas how to create certs? > Thanks a lot for all your great help you all doing such a great job > > Am 26.04.20, 21:25 schrieb "ratatouille" <ratatoui...@bitclusive.de>: > > Hello! > > Partha Datta <datta.pa...@gmail.com> schrieb am 24.04.20 um 00:34:14 Uhr: > > > I have installed OpenMeetings 5.0.0-M3. It is working in LAN both audio > & > > video. > > I have Openmeeting server behind a Linux firewall with NAT and opened > up > > 5443 & 8888 ports. I can not see or hear the meeting participants nor he > > can see me or hear. > > Is this firewall running on the same host like openmeetings? Is this > firewalld? > What does iptables -nL say on the firewall host? > > > The setup test, I can see my own voice and video. > > Here is my nat table > > rule family="ipv4" destination address="112.73.210.134" forward-port > > port="5443" protocol="tcp" to-port="5443" to-addr="192.168.110.16" > > rule family="ipv4" destination address="112.73.210.134" forward-port > > port="8888" protocol="tcp" to-port="8888" to-addr="192.168.110.16" > > > > public > > target: default > > icmp-block-inversion: no > > interfaces: > > sources: > > services: mdns dhcpv6-client > > ports: 53/udp 5080/tcp 1935/tcp 5443/tcp > > protocols: > > masquerade: no > > forward-ports: > > source-ports: > > icmp-blocks: > > rich rules: > > Andreas
