Hello, I'm using same steps as listed in Rene's post - and everything is working Maybe you have TURN ports closed?
On Wed, 25 Mar 2020 at 23:01, Daniel Baker <i...@collisiondetection.biz> wrote: > Yeah maybe we can build a VM for download that has TURN > installed already. A VM with TURN and one without. > > Thanks, > > > Dan > > On 25/03/2020 14:55, Benteftifa, Hafed wrote: > > Hello, > > > > It seems I am having the same problems as others regarding audio and > video. > > > > Here is the setup (Ubuntu 18) after following Alvaro's instructions: > > > > Setup 1: VM on vpsserver worked correctly. While users had the https > not safe message when using the IP address for the room, we were able to go > through the conference with audio and video. This is a backup solutions for > us. > > > > Setup 2: VM on our internal network. Access is through a VPN from the > outside. While users had the https not safe message when using the IP > address for the room, we were able to go through the conference with audio > and video. Unfortunately, a lot of jitters and random freeze and booting > out of some users occured. I believe this is due to the internal cloud > server we used. We will not be using this solution (too difficult for some > users to setup their vpn). > > > > Setup 3: We have a VM instance on Microsoft azure. While users had the > https not safe message when using the IP address for the room, everybody > was able to access the room and see his/her own camera and see the > microphone working. However, the rest of us were not able to hear audio and > video from the others. After spending hours on the mailing list, it boils > down to us not using a TURN server. > > > > I found this link on the mailing list (see post by René Sholtz): > https://markmail.org/message/3dgy62lj3m74mogy#query:+page:1+mid:3dgy62lj3m74mogy+state:results > > > > These are the instructions for configuring a TURN server (coturn). Since > we are using an IP address, did anyone have success in making those > configuration steps. Maybe Alvaro has written a setup manual for this part? > > > > Thanks > > > -- WBR Maxim aka solomax
