...yes you are right when say to install the grub in /dev/sda... ..............
El lun, 16-03-2020 a las 18:34 +0100, Patrick Bégou escribió: > Hi Alvaro, > > > > it was my first attempt many days ago > but with proxmox I wasn't able to boot after installation. I > think > today that the problem could be related to grub on /dev/sda1 > instead of /dev/sda.... But in the documentation, searching > some > help, I found it was not intended for production. So I switch > to > OM4 > > > May be I could try to create a new VM > and start again with OM5 and grub on /dev/sda. > > > It is just a little bit difficult as I > have to work from home (because of the coronavirus alert) and > it > is less easy (very little network bandwith). My goal is to have > openmeetings to work with the research team while we are not > allowed to move from home in France (4 to 6 weeks). > > > > Patrick > > > > > > Le 16/03/2020 à 18:21, Alvaro a écrit : > > > > > > > I have installed the live iso OM 5.0.0-M3 Ubuntu 18.04 in > > VirtualBox, and works right, login, browsing OpenMeetings > > and recording video at "Conference room" and "Interview room" > > with cam and mic. > > So try another configuration or so... > > > > > > > > > > > > > > > > > > > > ...................................... > > > > > > > > > > > > > > > > > > > > > > > > > > El lun, 16-03-2020 a las 17:52 +0100, Patrick Bégou escribió: > > > > > Hi Maxim, > > > > > > > > > > > > could provide a link to some > > > tutorial to setup openmeeting in https with RTPMS (if i > > > understand it is the tunneling part) with self signed > > > certificates ? > > > I find documentation saying it > > > works "out-of-the-box" (https://openmeetings.apache.org > > > /HTTPS.html) > > > or some document for 1.9 version and I'm not sure that > > > 4.10 > > > use the same setup.... > > > > > > > > > > > > jee-config.xml file is quite > > > complex for me, I've tried to comment the first part > > > ("without > > > ssl") and uncomment the end (removing a comment in the > > > first > > > section as recursive comments are not allowed, line 35) > > > but I > > > stay in http (netstat -n shows port 80 listening,) > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > Patrick > > > > > > > > > > > > > > > > > > Le 16/03/2020 à 12:48, Maxim > > > Solodovnik a écrit : > > > > > > > > > > > > > > > > > Hello All, > > > > > > > > > > > > > > > > It's been looong time I've installed OM on CentOS > > > > last > > > > time > > > > I hope Alvaro can answer these question :) > > > > > > > > > > > > > > > > According to ports > > > > 1) for 5.0 you need to modify server.xml > > > > 2) for 4.0 you need to modify jee-config.xml > > > > > > > > > > > > > > > > According to devices > > > > You need > > > > 1) HTTPS > > > > 2*) Flash browser plugin for 4.0 > > > > > > > > > > > > > > > > > > > > On Mon, 16 Mar 2020 at > > > > 16:35, Stefan Kühl <ste...@quatrekuehl.eu> > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > Hey @all, > > > > > what kind of vitrualizing software do you > > > > > use? > > > > > As far as I know is it for OM4 necessary that > > > > > the cam > > > > > and headset were assigned to the vm and not > > > > > to the > > > > > host. > > > > > Greetz > > > > > Hoschie > > > > > > > > > > > > > > > > > > > > > > > > > Am 16.03.2020 10:46, schrieb Sansao Machiana: > > > > > > > > > > > > > > > > > i have same problem on my ubuntu > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Sansão > > > > > > Machiana > > > > > > > > > > > > > > > > > > FUNAE > > > > > > - Fundo de Energia > > > > > > Unidade > > > > > > de Tecnologias de > > > > > > Informação e > > > > > > Comunicação > > > > > > R. > > > > > > da Imprensa, nº 256 - 6º > > > > > > andar, porta > > > > > > 607 - 610 > > > > > > Tel. > > > > > > +258 21 304717/+258 21 > > > > > > 304720 > > > > > > E-mail: > > > > > > sansaomachi...@funae.co.mz > > > > > > Maputo > > > > > > - Moçambique > > > > > > > > > > > > > > > > > > > > > > > > Por > > > > > > favor pense no Meio > > > > > > Ambiente, antes de > > > > > > imprimir este e-mail > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > De: > > > > > > Patrick Bégou <Patrick.Begou@legi > > > > > > .grenoble-inp.fr> > > > > > > > > > > > > Enviado: 16 de março de 2020 > > > > > > 11:15 > > > > > > > > > > > > Para: Openmeetings user-list > > > > > > > > > > > > Assunto: Re: Deploying > > > > > > Openmeeting 5 on Centos7 > > > > > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > I fnaly install openmeetings- > > > > > > 4.0.10. The > > > > > > server seams to run fine on the > > > > > > CentOS7 VM. I > > > > > > create my first user and try to > > > > > > connect from > > > > > > outside. IThere is a firewall and > > > > > > only port 80 > > > > > > is open by the lab. So in > > > > > > /opt/red54010/conf/red5.propertie > > > > > > s i've set > > > > > > http.port=80 and now I can login > > > > > > from home in > > > > > > openmeeting. > > > > > > But when testing the camera and the > > > > > > microphone I only have "select > > > > > > your langage" > > > > > > option ??? see the screen dump > > > > > > attached. My > > > > > > laptop is CentOS7. Is there some > > > > > > additional > > > > > > software to deploy for the > > > > > > clients ? > > > > > > > > > > > > I'm a little bit lost.... > > > > > > > > > > > > Thanks for your help > > > > > > > > > > > > Patrick > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Le 15/03/2020 à 12:02, Patrick > > > > > > Bégou a > > > > > > écrit : > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. > > > > > > > I follow the > > > > > > > "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" > > > > > > > document. > > > > > > > > > > > > > > I'm stalled at te step opening the browser on > > > > > > > https://localhost:5443/openmeetings/ as the answer is > > > > > > > "HTTP404 not found" > > > > > > > > > > > > > > I do not know tomcat at all, I've just changed the > > > > > > > starting setup with > > > > > > > > > > > > > > export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true" > > > > > > > > > > > > > > to make tomcat listening on IPV4 adresses and "netstat > > > > > > > -a" show it is ok. > > > > > > > > > > > > > > Any help appreciated and advices to make openmeeting > > > > > > > listening on port > > > > > > > 80 or 443 to finalize the setup. > > > > > > > > > > > > > > Patrick > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > FUNAE, Fundo De Energia - Disclaimer > > > > > > and > > > > > > Confidentiality Note > > > > > > > > > > > > > > > > > > > > > > > > A informação contida neste correio > > > > > > electrónico é > > > > > > confidencial e privilegiada, > > > > > > destinando-se > > > > > > unicamente à pessoa ou entidade acima > > > > > > indicada. Se o > > > > > > leitor desta mensagem não for o seu > > > > > > destinatário, > > > > > > fica pela presente notificado de que > > > > > > qualquer > > > > > > divulgação, distribuição ou reprodução > > > > > > do respectivo > > > > > > conteúdo é expressa e estritamente > > > > > > proibida. > > > > > > > > > > > > > > > > > > > > > > > > The information contained in this e- > > > > > > mail is > > > > > > privileged and confidential and is > > > > > > intended only for > > > > > > the use of the individual or entity > > > > > > named above. If > > > > > > the reader of this message is not the > > > > > > intended > > > > > > recipient, you are hereby notified that > > > > > > any > > > > > > dissemination, distribution or copying > > > > > > of this > > > > > > communication is strictly prohibited. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > WBR > > > > > > > > Maxim aka solomax > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
