Hello Christos,

The topic was discussed https://markmail.org/message/khy2pjp65wwpmy42
Please read the above discussion and ask additional questions (if any) here
:)

On Thu, 8 Aug 2019 at 01:35, Christos T. Rodosthenous <
[email protected]> wrote:

> Hello Maxim and Rene,
>
> Thank you for responding and helping. So I followed the steps in this
> tutorial https://doc-kurento.readthedocs.io/en/6.10.0/user/faq.html and
> setup coturn and connected it with kurento. I tested using
> https://webrtc.github.io/samples/src/content/peerconnection/trickle-ice/
> and it works. Unfortunately, in openmeetings I still have the same
> problems. Openmeetings is accessible through 5443 (5080 just redirects). Do
> I need to add any configuration to openmeetings as well? If you have any
> other ideas or pointers, let me know.
>
> Best,
> CR
>
> From: "Scholz, Rene" <[email protected]>
> Reply to: "[email protected]" <[email protected]>
> Date: Wednesday, 7 August 2019 at 9:05 PM
> To: "[email protected]" <[email protected]>
> Subject: Re: Openmeetings 5.0.0-M2 and NAT
>
> Hello Christos,
>
> i Had the same problems a few weeks ago.
> This week I am in a holiday-trip. If your problems next week not solve I
> can try to help you.
>
> Best regards,
>
> René
>
>
>
>
>
>
> Am Mittwoch, den 07.08.2019 um 18:52 schrieb Maxim Solodovnik:
> You need to install TURN server (I'm using `coturn` ATM)
>
> BTW I would close port 5080
>
> On Wed, 7 Aug 2019 at 17:34, Christos T. Rodosthenous <mailto:
> [email protected]> wrote:
> Hello,
>
> I have installed Openmeetings 5.0.0-M2. The installation works very well
> (both video and audio) when used though the local organization network.
> When an external user joins from a public network, the video and audio are
> not working (user joins the room). Firewall ports are allowed through
> 5443,5080 and 8888 and since everything else in working perfectly from the
> local network my guess is that the webRTC is not working with NAT so well.
>
> Anyone else tried that or have any hints on what to do? I am missing some
> port exceptions?
>
> CR
>
>
>
> --
> WBR
> Maxim aka solomax
>
>

-- 
WBR
Maxim aka solomax

Reply via email to