I can only suggest to check system logs :) On Mon, 10 Jun 2019 at 23:47, Stefan Kühl <ste...@quatrekuehl.eu> wrote:
> Ok, checked it in the demo -> works well! > > checked again kms status -> inactive (that was weird) > > Need to activate again via /etc/init.d/kurento-media-server start > > Done. > > That is really weird, because I've updatet the server, did a restart and > launch all dependencies. > I'm going to have a look at the next upate. Maybe some behaviour > concerning the sequence of service starts? > > Greetz > > Stefan > > > > Am 10.06.2019 18:35, schrieb Maxim Solodovnik: > > My best guess: > > In case KMS is not available you can see your own camera stream (loopback) > Own audio is not being played, but you can see mic level > > On Mon, 10 Jun 2019 at 23:34, Stefan Kühl <ste...@quatrekuehl.eu> wrote: > >> Will try it in a few minutes. But why do I have audio in the first room? >> >> >> >> >> >> Am 10.06.2019 18:12, schrieb Maxim Solodovnik: >> >> According to the attached video, KMS is inaccessible (regardless to the >> room) >> The only difference I've noticed: second room is audio-only >> >> Can you reproduce this issue on our demo-next? >> >> On Mon, 10 Jun 2019 at 23:10, Stefan Kühl <ste...@quatrekuehl.eu> wrote: >> >>> Hey Maxim, >>> >>> yes of course. And as I say: It worked well in rthe first room. But if I >>> change the room, the micro is not accessable and cloud not be activated. >>> >>> Greetz >>> >>> Stefan >>> >>> >>> >>> Am 10.06.2019 18:06, schrieb Maxim Solodovnik: >>> >>> Hello Stefan, >>> >>> version 5.0.0 will not work without media server >>> In your case error message is clear: "Multimedia server is inaccessible" >>> Have you installed Kurento? >>> >>> >>> On Sat, 8 Jun 2019 at 16:10, Stefan Kühl <ste...@quatrekuehl.eu> wrote: >>> >>>> Hi @all! >>>> >>>> I've tried to change room after microphone was active and works well. >>>> If I went to another room, microphone won't work anymore but when I came >>>> back to the first room everything works fine. >>>> Using >>>> Version 5.0.0-M1 >>>> Revision c88fce9 >>>> Builddate 2019-03-29T14:46:44Z >>>> >>>> Also -> all the red shining warning messages are driving me crazy. Any >>>> ideas? Did I miss something. >>>> To clear things up I attached a short video to verify my steps. >>>> >>>> Greetz >>>> >>>> Stefan >>>> >>> >>> >>> -- >>> WBR >>> Maxim aka solomax >>> >>> >> >> -- >> WBR >> Maxim aka solomax >> >> > > -- > WBR > Maxim aka solomax > > -- WBR Maxim aka solomax
