or maybe: red5-core.xml uncomment <!-- RTMPS --> On Thu, Nov 16, 2017 at 10:42 PM, Chamberland, Martin < martin.chamberl...@fadq.qc.ca> wrote:
> nano /opt/redXX/conf/jee-container.xml > > > > UNCOMMENT / COMMENT > > > > <!-- Tomcat without SSL enabled --> > > <!-- Tomcat with SSL enabled --> > > > > > > *De :* Tom Luo [mailto:mario...@gmail.com] > *Envoyé :* 16 novembre 2017 10:36 > *À :* user@openmeetings.apache.org > *Objet :* Re: https port > > > > Does anyone know why? > > > > > > On Thu, Nov 16, 2017 at 12:36 AM, Tom Luo <mario...@gmail.com> wrote: > > Hi, > > > > I set RTMPS to listen at 8443 in red5.properties. However, when I use > "sudo netstat -plnt" to check all ports, nothing is listening at port 8443. > > Does anyone know why? > > > > Thanks, > > > > Tom > > > > > > > > On Sat, Nov 11, 2017 at 8:43 PM, Maxim Solodovnik <solomax...@gmail.com> > wrote: > > http://openmeetings.apache.org/RTMPSAndHTTPS.html#Native_RTMPS > > > > After configuring OM server and successful run (without any errors) > > You need to set correct properties in Admin->Config > > > > In case of native RTMPS your HTTPS and RTMPS port should be > > 1) different > > 2) accessible > > > > > > According to dev console > > As I wrote before > > Detailed config with all data, host port modes, urls > > is available at the time of first connect > > There is the message "appInit()" followed by the object with all settings > > > > On Sat, Nov 11, 2017 at 12:12 PM, Tom Luo <mario...@gmail.com> wrote: > > Hi, Maxim, > > > > I am also confused. Do you mean my system is trying native RTMPS or > tunneling RTMPS? > > I want to use native RTMPS. If you can tell me how to setup native RTMPS > for OM4.0, it will be great. > > Right now, I feel the instructions are not clear. > > > > Best, > > > > Tom > > > > > > > > On Fri, Nov 10, 2017 at 11:52 PM, Tom Luo <mario...@gmail.com> wrote: > > Actually, I have never seen these options in chrome dev console. > > Do I have to turn on the debug mode of OM4,0? > > > > On Thu, Nov 9, 2017 at 9:31 PM, Maxim Solodovnik <solomax...@gmail.com> > wrote: > > It seems Flash trying to talk RTMPTS with RTMPS service > > Could you share these options > > 1. fallback: "rtmpt://localhost:5080/openmeetings/11" > > 2. mode: "broadcast" > > 3. native:"false" > > 4. rtmpPort: "1935" > > 5. rtmpsPort:"8443" > > 6. secure:"false" > > 7. > > Available in DEV console during appInit() call > > > > > > On Fri, Nov 10, 2017 at 12:23 AM, Tom Luo <mario...@gmail.com> wrote: > > Hi, Maxim, > > > > I turned on the debug mode and I did see error messages in the Chrome > debug console. > > But I don't know how to fix the problems. Do you know how? Please see the > messages below. > > > > ["onselect WxH :: 120x90"] > > VM497:1 ["resize:: 120x90"] > > VM498:1 ["Camera selected:: 0"] > > VM499:1 ["Entering getCam ..."] > > VM500:1 ["IS NO INTERVIEW "] > > VM501:1 ["... getCam DONE [object Camera]"] > > VM502:1 (2) ["Camera selected:: [object Camera]", false] > > VM504:1 ["Entering getCam ..."] > > VM505:1 ["IS NO INTERVIEW "] > > VM506:1 ["... getCam DONE [object Camera]"] > > VM507:1 ["_attachCamera():: muted ? false"] > > VM508:1 ["_attachCamera()::done"] > > :8443/open/1:1 POST https://www.ideastoproduct.net:8443/open/1 > net::ERR_EMPTY_RESPONSE > > VM512:1 ["ConnectionStatus: NetConnection.Connect.Failed"] > > VM517:1 (2) ["setRightsCallback", Array(1)] > > VM518:1 (3) ["_updateExclusive", Array(1), Array(3)] > > VM705:1 (2) ["appInit()", {…}] > > VM706:1 ["resize:: 300x200"] > > VM707:1 (2) ["NetConnection is not connected", "rtmps:// > www.ideastoproduct.net:8443/openmeetings/2"] > > :8443/open/1:1 POST https://www.ideastoproduct.net:8443/open/1 > net::ERR_EMPTY_RESPONSE > > VM798:1 ["ConnectionStatus: NetConnection.Connect.Failed"] > > > > On Thu, Nov 9, 2017 at 10:30 AM, Maxim Solodovnik <solomax...@gmail.com> > wrote: > > You can try to turn-on client debugging and check browser console ... > > > > On Thu, Nov 9, 2017 at 10:29 PM, Maxim Solodovnik <solomax...@gmail.com> > wrote: > > Massages from openmeetings.log are just DEBUG messages, nothing to worry > about > > Have you saved the Camera/Mic settings in Settings dialog? > > > > I don't know what can be wrong since everything works on demo ... > > > > On Thu, Nov 9, 2017 at 9:06 PM, Tom Luo <mario...@gmail.com> wrote: > > Adobe Flash in Firefox somethings will crash in the step. > > > > On Thu, Nov 9, 2017 at 8:35 AM, Tom Luo <mario...@gmail.com> wrote: > > In the choose device window, it will ask for camera permission. > > > > On Thu, Nov 9, 2017 at 8:33 AM, Tom Luo <mario...@gmail.com> wrote: > > In the demo website, after I enter a public room, the browser will ask for > the camera permission, however, in my website, the browser does not ask. > > This means the browser does not want to use camera. I don't know why. > > > > On Thu, Nov 9, 2017 at 8:24 AM, Tom Luo <mario...@gmail.com> wrote: > > I checked my openmeetings.log. > > I do see an error message: > > DEBUG 11-09 08:16:21.272 o.a.o.c.r.ScopeApplicationAdapter:767 > [Thread-57] - [MessageSender] -> 'Unable to send message to NULL scope' > clientUpdated, null > > DEBUG 11-09 08:16:21.297 o.a.o.d.d.r.PollDao:103 [0.0-5443-exec-3] - :: > hasPoll :: 4 > > DEBUG 11-09 08:16:21.300 o.a.o.d.d.r.PollDao:97 [0.0-5443-exec-3] - :: > getArchived :: 4 > > DEBUG 11-09 08:16:32.706 o.a.o.w.c.MainPanel:117 [0.0-5443-exec-9] - > Sending WebSocket PING > > DEBUG 11-09 08:16:39.925 o.a.o.w.a.Application:619 [0.0-5443-exec-8] - > Removing online room client: 8ad9cbcb-7ebc-4822-a8fb-c590c152448d, room: 4 > > DEBUG 11-09 08:16:39.932 o.a.o.c.r.ScopeApplicationAdapter:767 > [Thread-58] - [MessageSender] -> 'Unable to send message to NULL scope' > stopStream, java.lang.Object@4fa3b9c5 > > > > > > Is this related to my problem? > > > > > > > > On Thu, Nov 9, 2017 at 8:12 AM, Tom Luo <mario...@gmail.com> wrote: > > Hi, Maxim, > > > > I also thought I just need to set the Camera/Microphone once and it will > automatically start. This is the case in OM3.3. > > However, in OM4.0, this does not work. I can see the video in the > settings, but I cannot see the video after that. > > Please see the attached image. I really don't know why. It is so strange. > The port issue is solved. > > So, I know the port does not cause this problem. > > Do you know why? > > > > > > Thanks, > > > > Tom > > > > > > > > On Thu, Nov 9, 2017 at 2:54 AM, Maxim Solodovnik <solomax...@gmail.com> > wrote: > > Hello Tom, > > > > I'm answering emails as soon as I got free time, you shouldn't expect > immediate answer :)) > > > > Camera/Microphone will be started automatically as soon as you will set it > up once > > So open the settings, choose correct devises, press Save > > > > According to port availability you need to check detailed results: push > small "Copy" button on the right, Paste result to some text file and check > what is wrong > > > > On Thu, Nov 9, 2017 at 2:40 AM, Tom Luo <mario...@gmail.com> wrote: > > Another issue is that when I do port testing using the tool on the login > page. The port testing always fails even thought I opened all ports in my > server. > > Do you know why? Is this issue related to the camera issue? > > > > Thanks, > > > > Tom > > > > > > > > On Wed, Nov 8, 2017 at 2:38 PM, Tom Luo <mario...@gmail.com> wrote: > > Right now, I can see my video if I click "choose device". However, I still > cannot see the video in my camera in the public conference. > > > > The demo website does not have this problem. So, I know it must be some > settings in my side. > > Any idea how to solve this issue? > > > > Thanks, > > > > Tom > > > > > > > > On Wed, Nov 8, 2017 at 1:12 PM, Tom Luo <mario...@gmail.com> wrote: > > Ok. I fixed the problem. Now I can connect using https. I will explain to > you how I fixed the problem later. > > However, after I enter a public room, it seems my camera is not working. > > I remember in OM3.3. The camera automatically starts. Is there a button I > need to press in OM4.0 to start my camera? > > > > Thanks, > > > > Tom > > > > > > > > On Wed, Nov 8, 2017 at 12:45 PM, Maxim Solodovnik <solomax...@gmail.com> > wrote: > > I'm referring these instructions: http://openmeetings.apache.org/ > RTMPSAndHTTPS.html > > Unfortunately I have no time to check everything .... > > > > > > On Thu, Nov 9, 2017 at 12:29 AM, Tom Luo <mario...@gmail.com> wrote: > > Now there are some logs in red5.log > > > > 2017-11-08 17:26:39,998 [NioProcessor-11] INFO > o.r.s.net.rtmp.RTMPMinaConnection > - Connection is closed: WNZC8FWV7N3VL > > 2017-11-08 17:26:39,998 [NioProcessor-11] WARN > o.r.s.net.rtmp.RTMPMinaIoHandler > - Connection was not found for WNZC8FWV7N3VL > > 2017-11-08 17:26:40,007 [RTMPConnectionScheduler-5] WARN > o.r.server.net.rtmp.RTMPConnection - Closing O4WODAWEPAMAT, due to long > handshake. State: connect > > 2017-11-08 17:26:40,007 [NioProcessor-12] INFO > o.r.s.net.rtmp.RTMPMinaConnection > - Connection is closed: O4WODAWEPAMAT > > 2017-11-08 17:26:40,007 [NioProcessor-12] WARN > o.r.s.net.rtmp.RTMPMinaIoHandler > - Connection was not found for O4WODAWEPAMAT > > > > On Wed, Nov 8, 2017 at 12:22 PM, Tom Luo <mario...@gmail.com> wrote: > > http://openmeetings.markmail.org/message/j4gx2q6woidyqj7l?q=letsencrypt > > > > This is the instruction I followed. I performed step 1-8. Just skipped > step 7 as you said. > > > > I don't feel I miss any step. > > > > On Wed, Nov 8, 2017 at 12:20 PM, Maxim Solodovnik <solomax...@gmail.com> > wrote: > > Unfortunately not > > Maybe you miss some steps from the instructions? > > > > On Thu, Nov 9, 2017 at 12:17 AM, Tom Luo <mario...@gmail.com> wrote: > > Yes. I did SSL for the web interface and Set up Native RTMPS. > > It still does not work. Nothing is listening at port 5443. > > Do you have any other ideas why? > > > > Thanks, > > > > Tom > > > > > > > > On Wed, Nov 8, 2017 at 11:30 AM, Maxim Solodovnik <solomax...@gmail.com> > wrote: > > Have you performed these: http://openmeetings. > apache.org/RTMPSAndHTTPS.html#SSL_for_the_web_interface steps? > > > > On Wed, Nov 8, 2017 at 11:14 PM, Tom Luo <mario...@gmail.com> wrote: > > I cleared my old log and restarted the red5. > > Here is my red5.log: > > > > 2017-11-08 11:04:47,270 [main] INFO org.red5.server.Launcher - Red5 > Server 1.0.10 (https://github.com/Red5) > > 2017-11-08 11:04:47,338 [main] INFO o.s.c.s. > FileSystemXmlApplicationContext - Refreshing > org.springframework.context.support.FileSystemXmlApplicationContex > t@5f2050f6: startup date [Wed Nov 08 11:04:47 EST 2017]; root of context > hierarchy > > 2017-11-08 11:04:47,393 [main] INFO o.s.b.f.xml.XmlBeanDefinitionReader > - Loading XML bean definitions from class path resource [red5.xml] > > 2017-11-08 11:04:47,572 [main] INFO o.s.b.f.xml.XmlBeanDefinitionReader > - Loading XML bean definitions from class path resource [jee-container.xml] > > > > Right now, I can still use http at port 5080 to access OM4.0; however > https still does not work. > > Do I need to check other places? > > > > Thanks, > > > > Tom > > > > > > > > On Wed, Nov 8, 2017 at 10:55 AM, Maxim Solodovnik <solomax...@gmail.com> > wrote: > > please check red5.log. > > Red5 reports what ports it is listening > > > > Ports are configured in red5.properties > > HTTP vs HTTPS is being configured in jee*.xml > > > > All other configuration values are in Admin->Config > > > > On Wed, Nov 8, 2017 at 10:53 PM, Tom Luo <mario...@gmail.com> wrote: > > Is there a similar configuration file like > webapps/openmeetings/public/config.xml > in OM4.0? > > > > Thanks, > > > > Tom > > > > > > > > On Wed, Nov 8, 2017 at 10:52 AM, Tom Luo <mario...@gmail.com> wrote: > > Hi, Maxim, > > > > I checked the more up-to-date instructions you sent. It still lists step > 7: > > webapps/openmeetings/public/config.xml| > > > > I understand you said this step is not necessary. However, I tried to > access mydoamin:5443/openmeetings. > > I just see an inaccessible error. More important, I tried sudo netstat > -plnt, but nothing is listening at port 5443. > > Of course, I started the red5 server. Do you know why? > > > > > > Thanks, > > > > Tom > > > > > > > > On Wed, Nov 8, 2017 at 1:52 AM, Maxim Solodovnik <solomax...@gmail.com> > wrote: > > This is email from 2016 > > It is not necessary to modify config.xml anymore > > > > These parameters are redundant since 4.0.0 > > <protocol>https</protocol> <red5httpport>5443</red5httpport> > <rtmpsslport>5443</rtmpsslport> > > These can be set via Admin->Config > > <useSSL>yes</useSSL> <proxyType>none</proxyType> > > > > Here is the thread with more up-to-date instructions: http://markmail. > org/message/ik4qdhdychl364bp (I haven't check them ... ) > > > > On Wed, Nov 8, 2017 at 1:33 PM, Tom Luo <mario...@gmail.com> wrote: > > Hi, all, > > > > In the email: > > http://openmeetings.markmail.org/message/hqwjnihcfb4tqxkx?q=letsencrypt > > > > It said we need to modify > > > > Edit ../webapps/openmeetings/public/config.xml and set > > <protocol>https</protocol> <red5httpport>5443</red5httpport> > <rtmpsslport>5443</rtmpsslport> <useSSL>yes</useSSL> > <proxyType>none</proxyType> > > > > However, in OM4.0, I cannot find the config.xml file. > > So, which file should I modify? > > > > Thanks, > > > > Tom > > > > > > > > -- > > WBR > Maxim aka solomax > > > > > > > > > > -- > > WBR > Maxim aka solomax > > > > > > > > -- > > WBR > Maxim aka solomax > > > > > > > > -- > > WBR > Maxim aka solomax > > > > > > > > > > -- > > WBR > Maxim aka solomax > > > > > > > > > > > > -- > > WBR > Maxim aka solomax > > > > > > > > > > > > > > > > -- > > WBR > Maxim aka solomax > > > > > > -- > > WBR > Maxim aka solomax > > > > > > > > -- > > WBR > Maxim aka solomax > > > > > > > > > > -- > > WBR > Maxim aka solomax > > > > > -- WBR Maxim aka solomax
