Hi Jeff Thanks for the reply - good to know it will work
I've been following setup from here http://openmeetings.apache.org/red5sip-integration_3.1.html I assume the Asterisk config section will remain the same (I'll probably need to tweak some setting on the existing PBX), and I would just change the red5.host section of /opt/red5sip/settings.properties? Regards Jodi From: "Jeff Clay" <jeff.c...@cyient.com> To: user@openmeetings.apache.org Sent: Monday, October 17, 2016 4:58:36 PM Subject: Re: VOIP config with external Asterisk server It is possible and quite easy. What questions do you have? Unfortunately, I don’t have much time for going through a lot of specifics but I can hopefully point you in the right direction. On Oct 16, 2016, at 10:55 PM, Jodi Thomson < j...@webconnect.nz > wrote: I've been working with integrating OM 3 with Asterisk as per documentation. However this requires Asterisk install on same server as OM Has any one managed to get it working with a preexisting external Asterisk based PBX? It looks doable but can't experiment with our existing PBX and don't want to spin up another for testing if it's not possible Regards Jodi DISCLAIMER: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. Check all attachments for viruses before opening them. All views or opinions presented in this e-mail are those of the author and may not reflect the opinion of Cyient or those of our affiliates.
