I will send a request to Asterisk mailing list or forum this weekend.
From: Maxim Solodovnik [mailto:solomax...@gmail.com] Sent: Thursday, August 21, 2014 6:19 AM To: Openmeetings user-list Subject: Re: Modified instrctions for VOIP intergration in Openmeetings 3.0 Maybe asterisk has mailing list we can ask? On 21 August 2014 19:34, Horace Miles <horace.mi...@myit-solutions.com> wrote: Maxim, Thanks but I didn’t know any other way to initialize the astDB database table. If you know of a better way, we can do it that way. The only other alternative I could see was to start from scratch, which I really did not want to do. Miles From: Maxim Solodovnik [mailto:solomax...@gmail.com] Sent: Wednesday, August 20, 2014 7:39 AM To: Openmeetings user-list Subject: Re: Modified instrctions for VOIP intergration in Openmeetings 3.0 I have updated docs, but I don't really like the idea to modify the asterisk key/value DB manually On 18 August 2014 20:39, Horace Miles <horace.mi...@myit-solutions.com> wrote: Maxim, Thanks for all your help I have gotten everything to 3.0 VOIP and SIP integration to work. I believe if the documentation is changed as follows: Add the following comment section above the room extensions entry: ; ***************************************************** ; The below dial plan is used to dial into a Openmeetings Conference room ; The first line DB_EXISTS(openmeetings/room/ does not belong to the openmeetings application but is the name of astDB containing the astDB family/key pair and values ; To Check if your astDB has been created do the following in a terminal window type the following: ; asterisk –rx “database show” ; If you do not receive an output with that resembles openmeetings/rooms/400## where “##” will equal the extension assigned when you created your room ; If you do not receive the above output check your parameters in /opt/red5/webapps/openmeetings/WEB-INF/classes/openmeetings-applicationContext.xml ;If your parameters are correct and you still do not have the correct output from “asterisk –rx “database show” the astdb may not have been updated. Do the following ;In a terminal windows type the following command: Asterisk –rx “database put openmeetings/rooms 4000” Note: the value 4000 is used because the system will not create an extension with this value. ;Go back into the Administrator Panel and remove the PIN number in each room save the record with no PIN number and then re-enter the pin again resave the record. ; Recheck asterisk –rx “database show”. The proper entries should now be in the astDB table. ; ; ***************************************************** [rooms] exten => _400X!,1,GotoIf($[${DB_EXISTS(openmeetings/rooms/${EXTEN})}]?ok:notavail) exten => _400X!,n(ok),SET(PIN=${DB(openmeetings/rooms/${EXTEN})}) exten => _400X!,n,Set(CONFBRIDGE(user,template)=sip_user) exten => _400X!,n,Set(CONFBRIDGE(user,pin)=${PIN}) exten => _400X!,n(ok),Confbridge(${EXTEN},default_bridge,) exten => _400X!,n,Hangup exten => _400X!,n(notavail),Answer() exten => _400X!,n,Playback(invalid) exten => _400X!,n,Hangup [rooms-originate] exten => _400X!,1,Confbridge(${EXTEN},default_bridge,sip_user) exten => _400X!,n,Hangup [rooms-out] ; ***************************************************** ; Extensions for outgoing calls from Openmeetings room. ; ***************************************************** [rooms-red5sip] exten => _400X!,1,GotoIf($[${DB_EXISTS(openmeetings/rooms/${EXTEN})}]?ok:notavil) exten => _400X!,n(ok),Confbridge(${EXTEN},default_bridge,red5sip_user) exten => _400X!,n(notavail),Hangup -- WBR Maxim aka solomax -- WBR Maxim aka solomax
