>> I have configure the config.xml and red5.properties with my public IP. usually there is no additional configuration required
please try to telnet to your public IP to the port 5080, I suspect you have 1 or more firewall blocking connection we are not using onBWCheck method, so you can see warnings regarding this more detailed steps/logs can help me to help you :) On 15 July 2014 07:16, Horace Miles <horace.mi...@myit-solutions.com> wrote: > Upgraded from 2.0 to Openmeetings 3.0.2 Rev 1598809 Build date 31 May 2014 > > > > I have the following configuration public IP > > > > I can connect from the public IP on the local machine. However, when I > try to connect on the public IP from a remote host no connection is made. > > > > I have configure the config.xml and red5.properties with my public IP. > > > > Error Log = 0 > > Access log only shows connections made from the localhost. No connection > attempts other than the local host. > > > > I can ping the IP address from clients but Openmeetings does not even > register a connection attempt. > > > > Netstat – tlvn shows > > listening on Public IP:5080 and 1935 > > > > Where else can I check. Or what configuration have I missed? > > > > I also used the tutorial to integrate Asterisk. > > I am getting the following: > > Type 0 handshake comparison success > > Server response part 2 validation success, is Flash Player v9 handshake > > BaseRTMPClientHandler No service provider /method not found; to handle > calls like onBWCheck, add a service provider ---- I am unsure what it > asking for here. > > > > I am going to do a wireshire pcap but was wondering has anyone else > experienced this problem and knows of the quick fix? > > > > Thanks ahead of time. > > > -- WBR Maxim aka solomax
