This is my config.xml,Please help me to fix this.
<?xml version="1.0" encoding="UTF-8" ?>
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
-->
<config
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="config.xsd">
<!-- URL/IP to use for the Server for RTMP and RTMPT traffic.
If this value is empty it will try to connect to the
domain-name the OpenMeetings-Client has been loading from
Can be either and IP or a domain name.
For example:
<rtmphostlocal>192.168.254.182</rtmphostlocal>
or
<rtmphostlocal>mysubdomain.streaming.to</rtmphostlocal>
-->
<rtmphostlocal></rtmphostlocal>
<!-- URL/IP to use for the Server for HTTP and HTTPS traffic.
If this value is empty it will use the rtmphostlocal
variable (and in that way try to connect to the
domain-name the OpenMeetings-Client has been loading from)
-->
<httphostlocal></httphostlocal>
<!--
Port to use for the Server
To this port the default server lookup is done
You can find all this configuration in your red5-Config in:
$RED5_HOME/conf/red5.properties
-->
<rtmpport>1935</rtmpport>
<rtmpsslport>443</rtmpsslport>
<!--
Wether it should try to connect to rtmps first or not
Valid values: yes / no
NOTE: The OSx and Linux Flash Player are NOT able to connect via rtmps
The support for Windows is experimental
-->
<useSSL>no</useSSL>
<!--
Port to use for the Server
This port is used to connect to the http-servlet
of the red5-servlet
-->
<red5httpport>5080</red5httpport>
<!--
The protocol to use for the http connections
for example upload/download of files
-->
<protocol>http</protocol>
<!--
The setting for the NetConnection
default settings is "none"
set to value "best" if you are trying to use rtmp over native SSL
see:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/NetConnection.html#proxyType
-->
<proxyType>none</proxyType>
<!--
Name of the Application
this is the Top-Icon Name of the Application
-->
<currentappname>Roycemeet</currentappname>
<!--
URL to the Home of the Application
this is the URL which is used if you click on the Top-icon
-->
<currentappnameurl>http://openmeetings.apache.org</currentappnameurl>
<!--
Should APP name and/or logo be displayed
-->
<appdisplay>
<displayelement name="logo" display="true" x="5" y="5"/>
<displayelement name="name" display="true" x="140" y="10"/>
</appdisplay>
<!--
URL to Bugs/Support
this is the URL which is used if you click on *report a bug*
-->
<currentappnamebugurl></currentappnamebugurl>
<!--
Video-Settings
Number that specifies the amount of sound required to activate the
microphone
Acceptable values from 0 to 100.
this value is used in Audio_Streaming, at which the *activity-meter*
will
send a notification for all connected hosts of a conference
the result of this notification is that you see the green-light
highlighted if
a remote user is speaking
-->
<loudnessAcitviation>0</loudnessAcitviation>
<!--
OpenMeetings-Webapp Name
This is the name of the WebApp the Client will try to connect
in former versions (till 0.5 Beta7) the name was xmlcrm
the same param kann be find in the webapp in the Red5-Webapp
red5-web.properties
web.xml
-->
<webAppRootKey>roycemeet</webAppRootKey>
<!--
We need this additional ROOT-Key as we have to deploy the application
as Global Contex Root.
If the rtmpt issues is solved sothat several Webapps can use different
RTMPT connection
we might change this value again to its origin / webapp-context
-->
<httpRootKey>/roycemeet/</httpRootKey>
<!--
Window-Effect Settings
showWindowEffect-values:
y = yes
n = no
showWindowEffectOpacity-values
between 0 and 1
-->
<showWindowEffect>n</showWindowEffect>
<!--
Show the recorder buttons in the Conference Rooms
visible = yes
hidden = no
-->
<showRecording>hidden</showRecording>
<!--
To enable the modern whiteboard Panel you need to switch this to y
old menu bar is not active any more
<showmodernWhiteBoard>y</showmodernWhiteBoard>
-->
<!--
First day in the Week used by the Calendar
0 means Sunday
1 means Monday
this is the way how the calendar UI shows a week
-->
<firstdayinweek>0</firstdayinweek>
<!--
#############################################################################
Audio and Video Settings
Before you change settings here,
you should first Play and learn how the Settings work in the
Documentation:
http://code.google.com/p/openmeetings/wiki/AudioVideoTestingApplication
#############################################################################
-->
<!-- Camera Settings for codecType
codecType possible values:
h263
h264
If you want to use red5sip, set value to "h264"
-->
<codecType>h264</codecType>
<!-- Camera Settings for the FramesPerSecond
fps:Number [optional] - The requested rate at which the camera should
capture
data, in frames per second. The default value is 15.
-->
<framesPerSecond>30</framesPerSecond>
<!-- Camera Settings for the Bandwidth:
bandwidth:Number [optional] - An integer that specifies the maximum
amount
of bandwidth that the current outgoing video feed can use, in bytes per
second.
To specify that Flash video can use as much bandwidth as needed to
maintain
the value of frameQuality, pass 0 for bandwidth. The default value is
16384.
-->
<!-- These are the settings for the Quality-Modus *normal*
The Quality-Modus can be chosen in the Login-Box -->
<bandwidthNeededNormal>16384</bandwidthNeededNormal>
<!-- These are the settings for the Quality-Modus *best* -->
<bandwidthNeededBest>0</bandwidthNeededBest>
<!-- Camera Settings for the Quality
quality:Number [optional] - An integer that specifies the required
level of
picture quality, as determined by the amount of compression being
applied to
each video frame. Acceptable values range from 1 (lowest quality,
maximum
compression) to 100 (highest quality, no compression). To specify that
picture
quality can vary as needed to avoid exceeding bandwidth, pass 0 for
quality.
The default value is 0.
-->
<!-- These are the settings for the Quality-Modus *normal* -->
<camQualityNormal>85</camQualityNormal>
<!-- These are the settings for the Quality-Modus *best* -->
<camQualityBest>90</camQualityBest>
<!-- Microphone Settings for the Rate:
rate:Number -
The rate at which the microphone should capture sound, in kHz.
Acceptable values are 5, 8, 11, 22, and 44.
The default value is 8 kHz if your sound capture
device supports this value. Otherwise, the default value
is the next available capture level above 8 kHz that your sound
capture device supports, usually 11 kHz.
-->
<!-- Microphone Settings Quality-Modus -->
<microphoneRateBest>22</microphoneRateBest>
<!-- AEC configuration value
Specifies the echo path length (in milliseconds). A longer echo path means
better
echo cancellation but also introduces longer delays and requires more
processing power.
The default value is 128; the only other possible value is 256.
To disable AEC please specify 0.
-->
<echoPath>128</echoPath>
<!--
Set "true" or "false" to enable/disable microphone echo suppression
-->
<echoSuppression>true</echoSuppression>
<!--
The Size of the Whiteboard
The Whiteboard has scrollbars so you may increase the size without
problems
-->
<defaultWhiteboardWidth>2400</defaultWhiteboardWidth>
<defaultWhiteboardHeight>1200</defaultWhiteboardHeight>
<!-- Available Configurations -->
<availableCameraResolutions>
<resolution type="4:3 (~6 KByte/sec)" width="40" height="30"
isDefault="false" />
<resolution type="4:3 (~12 KByte/sec)" width="80" height="60"
isDefault="false" />
<resolution type="4:3 (~20 KByte/sec)" width="120" height="90"
isDefault="true" />
<resolution type="QQVGA 4:3 (~36 KByte/sec)" width="160" height="120"
isDefault="false" />
<resolution type="4:3 (~40 KByte/sec)" width="240" height="180"
isDefault="false" />
<resolution type="HVGA 4:3 (~56 KByte/sec)" width="320" height="240"
isDefault="false" />
<resolution type="4:3 (~60 KByte/sec)" width="480" height="360"
isDefault="false" />
<resolution type="4:3 (~68 KByte/sec)" width="640" height="480"
isDefault="false" />
<resolution type="XGA 4:3" width="1024" height="768" isDefault="false"
/>
<resolution type="16:9" width="256" height="150" isDefault="false" />
<resolution type="WQVGA 9:5" width="432" height="240" isDefault="false"
/>
<resolution type="pseudo 16:9" width="480" height="234"
isDefault="false" />
<resolution type="16:9" width="512" height="300" isDefault="false" />
<resolution type="nHD 16:9" width="640" height="360" isDefault="false"
/>
<resolution type="16:9" width="1024" height="600" isDefault="false" />
</availableCameraResolutions>
<!-- Module Configuration -->
<!-- #############################################
Moderator Modules
-->
<moderatorModuleUser>userModerate</moderatorModuleUser>
<moderatorModuleRoom>roomModerate</moderatorModuleRoom>
<!-- Conference Room Modules -->
<conferenceModuleRoomList>allmeetings</conferenceModuleRoomList>
<!-- #############################################
Conference Room
Room Layout's: flexibleConferenceRoom,conferenceView
-->
<conferenceRoomModule>flexibleConferenceRoom</conferenceRoomModule>
<!-- #############################################
Event Room
Room Layouts: flexibleRestrictedConferenceRoom,restrictedConferenceRoom
-->
<restrictedRoomModule>restrictedConferenceRoom</restrictedRoomModule>
<!-- #############################################
Interview Room
Room Layouts: interviewConferenceRoom
-->
<interviewRoomModule>interviewConferenceRoom</interviewRoomModule>
</config>
On Tue, Jun 24, 2014 at 5:01 PM, Maxim Solodovnik <solomax...@gmail.com>
wrote:
> Will try to double check
>
>
> On 24 June 2014 18:26, Uma <umadevi...@gmail.com> wrote:
>
>> i already change the current app name in config.xml....
>>
>> the only thing is login with invitation url it shows the name as
>> openmeetings....
>> where i did the mistake
>>
>>
>> On Tue, Jun 24, 2014 at 4:52 PM, Maxim Solodovnik <solomax...@gmail.com>
>> wrote:
>>
>>> Try to change config.xml file?
>>>
>>>
>>> On 24 June 2014 18:20, Uma <umadevi...@gmail.com> wrote:
>>>
>>>> Hi
>>>>
>>>> Here i attached the screen shot also
>>>>
>>>>
>>>> On Tue, Jun 24, 2014 at 4:38 PM, Maxim Solodovnik <solomax...@gmail.com
>>>> > wrote:
>>>>
>>>>> could you please share screenshot?
>>>>>
>>>>>
>>>>> On 24 June 2014 17:13, Uma <umadevi...@gmail.com> wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> I need to change the Invitation Name of the Browser Title window it's
>>>>>> shows "OpenMeeting"
>>>>>>
>>>>>> I already change the application.name "My app name".
>>>>>> It's shows correctly for the users direct login but when user attend
>>>>>> the meeting via invitation means the Name of the Browser Title window is
>>>>>> correct but the application name is shows "Open meetings" only....
>>>>>>
>>>>>> Please help me to fix this
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> WBR
>>>>> Maxim aka solomax
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> WBR
>>> Maxim aka solomax
>>>
>>
>>
>
>
> --
> WBR
> Maxim aka solomax
>
