The fact is: I was unable to download your log files (approximately 68m)
due to timeout after veeeeery slow download process. I believe you need to
double Chechen your network configuration
On Feb 26, 2014 6:28 PM, "Varga Balázs" <[email protected]> wrote:

>  Hello Max!
>
> Main server on 100/100 dedicated connection on servercenter. International
> granted bw. min 20Mbit
>
> I tested now:
>  lshw -C network
> WARNING: you should run this program as super-user.
>   *-network
>        description: Ethernet interface
>        product: NetXtreme BCM5722 Gigabit Ethernet PCI Express
>        vendor: Broadcom Corporation
>        physical id: 0
>        bus info: pci@0000:0e:00.0
>        logical name: eth0
>        version: 00
>        serial: f4:ce:46:e6:63:d0
>        size: 100Mbit/s
>        capacity: 1Gbit/s
>        width: 64 bits
>        clock: 33MHz
>        capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd
> 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
>        configuration: autonegotiation=on broadcast=yes driver=tg3
> driverversion=3.121 duplex=full firmware=5722-v3.07 ip=195.56.44.167
> latency=0 multicast=yes port=twisted pair speed=100Mbit/s
>
> @server6:~$ ./speedtest-cli
> Retrieving speedtest.net configuration...
> Retrieving speedtest.net server list...
> Testing from GTS Hungary Telecommunications Limited (195.56.44.167)...
> Selecting best server based on ping...
> Hosted by TvNetTel (Szentes) [43.37 km]: 11.285 ms
> Testing download speed........................................
> Download: 93.79 Mbit/s
> Testing upload speed..................................................
> Upload: 87.88 Mbit/s
>
> The up/down link is good.
> The log files send out nginx, not throtled.
>
> The OM throtling bw only Red5 config, i not modifye this.
> In red5 find bw settings, maximised 10 Mbit/client.
>
> I try download log - on another server - from om server (100/100
> dedicated).
> $ wget http://195.56.44.167:8080/openmeetings/log/olds/jvm.stdout
> --2014-02-26 13:20:24--
> http://195.56.44.167:8080/openmeetings/log/olds/jvm.stdout
> Connecting to 195.56.44.167:8080... connected.
> HTTP request sent, awaiting response... 200 OK
> Length: 24909958 (24M) [application/octet-stream]
> Saving to: “jvm.stdout”
>
> 100%[======================================>] 24,909,958  11.2M/s   in
> 2.1s
>
> 2014-02-26 13:20:26 (11.2 MB/s) - “jvm.stdout” saved [24909958/24909958]
>
>
> The nginx based log bandwith is good. 11.2 MB/s ~ 100Mbps
>
> This test consequent:
>
> If red5 send unthrotled, the <2MByte app ~ downloadable max 20Mbps -
> current settings dwl max (on 10 Mbps linit) 2 sec.
> If client network 3 Mbps dwl bw, the 2 MByte app dwl time - on math base
> -  < 10 sec.
>
> This results they are distant to the real app loading procedure 35~120 sec
> loading time.
>
> Balazs
>
> 2014-02-26 12:29 keltezéssel, Maxim Solodovnik írta:
>
> Hello Varga,
> Your server is very slow (I was unable to download your log file due to
> timeout)
> You need faster inet connection on server for videoconferencing
> On Feb 25, 2014 4:02 PM, "Varga Balázs" <[email protected]> wrote:
>
>> Hello Max!
>>
>> I try OM server (now 3.1) loadings.
>>
>> Main internet not boost, simple ADSL 5/0,5 Mbps, avg 3,7/0.37 Mbps ~ 0.4
>> MBps/0.04MBps.
>>
>> The complete OM app (as moderator) download in non cached browser ~1.8 MB
>> in many block. On main connection ~ 17 sec (onloan ~6sec)
>> The finaly point, app downloaded, initialized, rendering completedi 59.48
>> sec!
>>
>> The loader process try 1,2 good, try 3 is very slow! In try 3
>> flash/browser is freeze (grey layer on firefox, plugin not response in
>> chrome) temporary
>>
>> If login as partizipant (registered/nonregistered eq.) after try3 point
>> is set language panel and have plus many loading (language specific
>> content).
>> The partizipant loading time 1:40 !
>>
>> How mutch the complete OM downolad size? Have optimize the app size eg.
>> images
>> The firefox listening only http query size, not measure ower flash/rtmp
>> download (theme.xml).
>>
>> I don't understand, whie is many-many time the initialization. I try this
>> procedure over high sped cable net (60/20Mbps) and the loading time not
>> super speed into. What is a slowly "backend" procedure?
>>
>> The network speed is avg 1-5Mbps download in european users. The
>> partizipants not await above 30 sec on loading, leave the conference and
>> not apply this in futhure!
>>
>> Howto reduce downloading sizes and speed up rendering, processing ower
>> flash process?
>>
>> Balazs
>>
>>
>

Reply via email to